The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A review on various after treatment techniques to reduce NOx emissions in a CI engine
Abstract
Abstract NOx emissions have always been a main concern in the development of diesel engines. This paper summarizes the studies about NOx emission reduction in diesel engines. The need for meeting the stringent requirements with regard to NOx emissions in a diesel engine has led to the development of a range of after treatment techniques. After treatment methods are required to reduce NOx emissions that cannot be controlled by fuel composition and combustion phenomena. Current after treatment techniques that are being employed are Selective Catalytic Reduction (SCR), Lean NOx Trap (LNT) and SCR Filter (SCRF). The benefits and constraints of different types of SCR are discussed. Urea SCR is a prominent well proven technology. Urea SCR produces 96–99% conversion efficiency with the help of a reductant NH 3 . The operating parameters such as nature of catalyst, temperature range of catalyst, flow of DEF (Diesel Exhaust fluid) to injector and mixing of NH 3 and NOx are discussed. Hybrid SCR such as Cu-SCR + Fe-SCR, SCR + LNT moderates fuel consumption and augments the catalytic activity at low temperature. SCRF has low cell density (200–300 csi vs 400–600 csi for SCR), and also has lower deNOx efficiency for a number of reasons. Pre-stored NH 3 and Preheating helps in low temperature reaction of SCRF. Technical problems in aqueous urea systems have led to the evolution of solid SCR system (SSCR). This review incorporates the study of solid ammonium salts decomposition, temperature range of the salts and infrastructure required for SSCR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, J., Chang, H., Ma, L., Hao, J., & Yang, R. T. (2011) · Catalysis Today · doi:10.1016/j.cattod.2011.03.034 · Cited by 925
Guan, B., Zhan, R., Lin, H., & Huang, Z. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.02.021 · Cited by 493
Johnson, T. (2016) · SAE International Journal of Engines · doi:10.4271/2016-01-0919 · Cited by 390
A review of recent advances in selective catalytic NOx reduction reactor technologies
Cheng, X., & Bi, X. T. (2014) · Particuology · doi:10.1016/j.partic.2014.01.006 · Cited by 138
Ammonia Loading Detection of Zeolite SCR Catalysts using a Radio Frequency based Method
Rauch, D., Kubinski, D. J., Cavataio, G., Upadhyay, D. K., & Moos, R. (2015) · SAE International Journal of Engines · doi:10.4271/2015-01-0986 · Cited by 37
Ocampo, F., Harle, V., Ohtake, N., Rohe, R., & Southward, B. W. L. (2015) · SAE International Journal of Engines · doi:10.4271/2015-01-0988 · Cited by 6
Cited by
Asghar, U., Rafiq, S., Anwar, A., Iqbal, T., Ahmed, A., Jamil, F., Khurram, M. S., Akbar, M. M., Farooq, A., Shah, N. S., et al. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106064 · Cited by 286
Qie, F., Zhu, J., Rong, J., & Zong, B. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122037 · Cited by 64
Cubic Bi 2 O 3 -Based Electrochemical Nitric Oxide Sensor Using Double Perovskite Oxide Electrodes
Bhardwaj, A., Bae, H., Mathur, L., Mathur, S., & Song, S.-J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aca2e0 · Cited by 7
Metadata
- Authors
- Praveena, V., & Martin, M. L. J.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 91
- Issue
- 5
- Pages
- 704-720
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W2622319554
- Cited by
- 255
- References
- 6
- FWCI
- 12.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on various after treatment techniques to reduce NOx emissions in a CI engine. https://app.cochat.ai/papers/10.1016/j.joei.2017.05.010
- The paper
- Praveena, V., & Martin, M. L. J. (2018). A review on various after treatment techniques to reduce NOx emissions in a CI engine. Journal of the Energy Institute. https://doi.org/10.1016/j.joei.2017.05.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.