The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization
Abstract
This work primarily investigated the pyrolysis of post-consumer mixed plastic wastes during slow pyrolysis (non-isothermal) in a batch reactor to assess the effect of different heating rates on the product yield and its composition. The effect of residence time during fast pyrolysis (Isothermal) in Pyro-GC was also investigated. Initially, TG analysis was performed to investigate the degradation temperature range at different heating rates of 5, 10, 20 and 40 °C/min. Two different heating rates of 10 and 20 °C/min were selected for examining the effect on products such as oil and gases (H2, CO, CO2 and C1-C6 hydrocarbons) during slow pyrolysis. The oil obtained at higher heating rate had higher density (0.743 kg/m3) while the amount of residue decreased with the increase in heating rate. Also, the effect of residence time during fast pyrolysis was investigated using Pyro-GC at 500 °C for the product formation. It was observed that an optimum residence time of 10sec was favourable for the higher production of lower hydrocarbons (C1-C3) and less production of heavier hydrocarbons (C6). This work represents the combined analysis of fast and slow pyrolysis and their impact on the product yield. Also, the effect of heating rate on non-isothermal condition and the effect of the residence time of volatiles in isothermal condition was analysed and reported.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Cited by
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Current technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Farrell, C. C., Osman, A. I., Doherty, R., Saad, M., Zhang, X., Murphy, A., Harrison, J., Vennard, A. S. M., Kumaravel, V., Al-Muhtaseb, A. H., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109911 · Cited by 326
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Metadata
- Authors
- Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 92
- Issue
- 6
- Pages
- 1647-1657
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W2913981821
- Cited by
- 230
- References
- 1
- FWCI
- 7.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization. https://app.cochat.ai/papers/10.1016/j.joei.2019.01.009
- The paper
- Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019). Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization. Journal of the Energy Institute. https://doi.org/10.1016/j.joei.2019.01.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.