Microwave pyrolysis of polystyrene and polypropylene mixtures using different activated carbon from biomass
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this study, microwave pyrolysis was experimented with mixed types of plastic waste. Two different plastic wastes polystyrene waste (PSW) and polypropylene waste (PPW) were used as feedstock. Carbon and activated carbon were synthesized from different biomass; rice husk (RH), corn husk (CH) and coconut sheath (CS) respectively which are used as microwave susceptors. The effect of impregnation on product yields was studied. Microwave pyrolysis at 900 W and with a polymer to an absorbent ratio of 10:1, produced the highest oil yield of 84.30 wt% when coconut sheath activated carbon (CSAC) was used as an absorbent. The reaction time was 10 min for the complete decomposition of polymer mixtures. Oil properties were determined and a high calorific value of 46.87 MJ kg−1 was obtained. These properties were compared to conventional fuel properties and the product oil has a density of 0.76 g ml−1 and viscosity of 2.4 cSt which is an equivalent fraction obtained to that of gasoline. Product oil has a styrene recovery of 67.58% from microwave pyrolysis. The results demonstrate that, microwave pyrolysis has a great potential for energy recovery from mixed plastic waste and the use of agricultural residues as absorbents enhanced the production efficiency of the process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Cited by
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
A review of microwave pyrolysis as a sustainable plastic waste management technique
Putra, P. H. M., Rozali, S., Patah, M. F. A., & Idris, A. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.114240 · Cited by 165
Rex, P., Mohammed Ismail, K., Meenakshisundaram, N., Barmavatu, P., & Sai Bharadwaj, A. (2023) · ChemEngineering · doi:10.3390/chemengineering7030050 · Cited by 74
Self-citationZhang, K., Huang, Z., Yang, M., Liu, M., Zhou, Y., Zhan, J., & Zhou, Y. (2023) · SusMat · doi:10.1002/sus2.157 · Cited by 52
Metadata
- Authors
- Rex, P., Masilamani, I. P., & Miranda, L. R.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 93
- Issue
- 5
- Pages
- 1819-1832
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W3014695243
- Cited by
- 98
- References
- 3
- FWCI
- 4.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.