The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Open accessAbstract
Summary Retaining sound electrochemical performance of electrodes at high mass loading holds significant importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO2) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. Yet, this is only achievable with very small mass loading of active material typically less than 1 mg cm−2. Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. Here, we demonstrate a 3D printed graphene aerogel electrode with MnO2 loading of 182.2 mg cm−2, which achieves a record-high areal capacitance of 44.13 F cm−2. Most importantly, this 3D printed graphene aerogel/MnO2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors
El-Kady, M. F., Strong, V., Dubin, S., & Kaner, R. B. (2012) · Science · doi:10.1126/science.1216744 · Cited by 4,008
Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials
Acerce, M., Voiry, D., & Chhowalla, M. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.40 · Cited by 2,797
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Liquid-Mediated Dense Integration of Graphene Materials for Compact Capacitive Energy Storage
Yang, X., Cheng, C., Wang, Y., Qiu, L., & Li, D. (2013) · Science · doi:10.1126/science.1239089 · Cited by 1,838
He, Y., Chen, W., Li, X., Zhang, Z., Fu, J., Zhao, C., & Xie, E. (2013) · ACS Nano · doi:10.1021/nn304833s · Cited by 1,427
Effect of Crystallographic Structure of MnO 2 on Its Electrochemical Capacitance Properties
Devaraj, S., & Munichandraiah, N. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp7108785 · Cited by 1,385
Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Self-citationSupercapacitor Behavior with KCl Electrolyte
Lee, H. Y., & Goodenough, J. B. (1999) · Journal of Solid State Chemistry · doi:10.1006/jssc.1998.8128 · Cited by 1,143
Feng, D., Lei, T., Lukatskaya, M. R., Park, J., Huang, Z., Lee, M., Shaw, L., Chen, S., Yakovenko, A. A., Kulkarni, A., et al. (2018) · Nature Energy · doi:10.1038/s41560-017-0044-5 · Cited by 1,125
Yang, P., Ding, Y., Lin, Z., Chen, Z., Li, Y., Qiang, P., Ebrahimi, M., Mai, W., Wong, C. P., & Wang, Z. L. (2014) · Nano Letters · doi:10.1021/nl404008e · Cited by 1,076
Self-citationAll-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance
Chen, C., Zhang, Y., Li, Y., Dai, J., Song, J., Yao, Y., Gong, Y., Kierzewski, I., Xie, J., & Hu, L. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03716j · Cited by 744
Self-citationSupercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Self-citationWO3–x@Au@MnO2 Core–Shell Nanowires on Carbon Fabric for High‐Performance Flexible Supercapacitors
Lu, X., Zhai, T., Zhang, X., Shen, Y., Yuan, L., Hu, B., Gong, L., Chen, J., Gao, Y., Zhou, J., et al. (2012) · Advanced Materials · doi:10.1002/adma.201104113 · Cited by 683
Stabilized TiN Nanowire Arrays for High-Performance and Flexible Supercapacitors
Lu, X., Wang, G., Zhai, T., Yu, M., Xie, S., Ling, Y., Liang, C., Tong, Y., & Li, Y. (2012) · Nano Letters · doi:10.1021/nl302761z · Cited by 670
Self-citationPolypyrrole-coated paper for flexible solid-state energy storage
Yuan, L., Yao, B., Hu, B., Huo, K., Chen, W., & Zhou, J. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23977a · Cited by 623
Self-citationEl-Kady, M. F., Ihns, M., Li, M., Hwang, J. Y., Mousavi, M. F., Chaney, L., Lech, A. T., & Kaner, R. B. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1420398112 · Cited by 583
Engineering of MnO2-based nanocomposites for high-performance supercapacitors
Wang, J.-G., Kang, F., & Wei, B. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.04.003 · Cited by 568
Freestanding Mesoporous VN/CNT Hybrid Electrodes for Flexible All‐Solid‐State Supercapacitors
Xiao, X., Peng, X., Jin, H., Li, T., Zhang, C., Gao, B., Hu, B., Huo, K., & Zhou, J. (2013) · Advanced Materials · doi:10.1002/adma.201301465 · Cited by 462
Zhai, T., Xie, S., Yu, M., Fang, P., Liang, C., Lu, X., & Tong, Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.06.013 · Cited by 442
Cheng, Y., Huang, L., Xiao, X., Yao, B., Yuan, L., Li, T., Hu, Z., Wang, B., Wan, J., & Zhou, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.007 · Cited by 423
Self-citationYao, B., Yuan, L., Xiao, X. R., Zhang, J., Qi, Y., Zhou, J., Zhou, J., Hu, B., & Chen, W. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.09.002 · Cited by 385
Self-citationZhai, T., Wang, F., Yu, M., Xie, S., Liang, C., Li, C., Xiao, F., Tang, R., Wu, Q., Lu, X., et al. (2013) · Nanoscale · doi:10.1039/c3nr01589k · Cited by 271
Zhang, M., Yu, X., Ma, H., Du, W., Qu, L., Li, C., & Shi, G. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03349d · Cited by 149
Zhai, T., Lu, X., Wang, H., Wang, G., Mathis, T. S., Liu, T., Li, C., Tong, Y., & Li, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00321 · Cited by 144
Self-citation3D Interdigital Au/MnO2/Au Stacked Hybrid Electrodes for On‐Chip Microsupercapacitors
Hu, H., Pei, Z., Fan, H. J., & Ye, C. (2016) · Small · doi:10.1002/smll.201503527 · Cited by 137
Wu, J., Gao, X., Yu, H., Ding, T., Yan, Y., Yao, B., Yao, X., Chen, D., Liu, M., & Huang, L. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601811 · Cited by 125
Self-citation
Research works printed but not linked: 10
- Song, 2017, Ostwald ripening improves rate capability of high mass loading manganese oxide for supercapacitors, ACS Energy Lett., 2, 1752, 10.1021/acsenergylett.7b00405 · doi:10.1021/acsenergylett.7b00405
- Kang, 2013, Enhanced supercapacitor performance of MnO2 by atomic doping, Angew. Chem. Int. Ed., 52, 1664, 10.1002/anie.201208993 · doi:10.1002/anie.201208993
- Hu, 2011, Symmetrical MnO2-carbon nanotube-textile nanostructures for wearable pseudocapacitors with high mass loading, ACS Nano, 5, 8904, 10.1021/nn203085j · doi:10.1021/nn203085j
- Yang, 2014, Nanostructured porous MnO2 on Ni foam substrate with a high mass loading via a CV electrodeposition route for supercapacitor application, Electrochim. Acta, 136, 189, 10.1016/j.electacta.2014.05.074 · doi:10.1016/j.electacta.2014.05.074
- Lv, 2012, Carbon fabric-aligned carbon nanotube/MnO2/conducting polymers ternary composite electrodes with high utilization and mass loading of MnO2 for super-capacitors, J. Power Sources, 220, 160, 10.1016/j.jpowsour.2012.07.073 · doi:10.1016/j.jpowsour.2012.07.073
- Yao, 2016, Flexible transparent molybdenum trioxide nanopaper for energy storage, Adv. Mater., 28, 6353, 10.1002/adma.201600529 · doi:10.1002/adma.201600529
- Vinny, 2016, An excellent cycle performance of asymmetric supercapacitor based on bristles like α-MnO2 nanoparticles grown on multiwalled carbon nanotubes, J. Power Sources, 309, 212, 10.1016/j.jpowsour.2016.01.098 · DOI
- Wang, 2018, Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor, Nano Energy, 49, 481, 10.1016/j.nanoen.2018.05.002 · doi:10.1016/j.nanoen.2018.05.002
- Nakayama, 2016, Direct growth of birnessite-type MnO2 on treated carbon cloth for a flexible asymmetric supercapacitor with excellent cycling stability, J. Electrochem. Soc., 163, A2340, 10.1149/2.1031610jes · doi:10.1149/2.1031610jes
- Song, 2017, Amorphous mixed-valence vanadium oxide/exfoliated carbon cloth structure shows a record high cycling stability, Small, 13, 1700067, 10.1002/smll.201700067 · doi:10.1002/smll.201700067
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
Rechargeable aqueous Zn-based energy storage devices
Liu, Y., Lu, X., Lai, F., Liu, T., Shearing, P. R., Parkin, I. P., He, G., & Brett, D. J. L. (2021) · Joule · doi:10.1016/j.joule.2021.10.011 · Cited by 471
Non-metallic charge carriers for aqueous batteries
Liang, G., Mo, F., Ji, X., & Zhi, C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00241-4 · Cited by 461
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
Metadata
- Authors
- Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 3
- Issue
- 2
- Pages
- 459-470
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2896777062
- Cited by
- 491
- References
- 35
- FWCI
- 14.95
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (vor, 384 d)
- Funders
- NSF (MRI-1126845)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.