The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Open accessAbstract
Summary Retaining sound electrochemical performance of electrodes at high mass loading holds significant importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO2) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. Yet, this is only achievable with very small mass loading of active material typically less than 1 mg cm−2. Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. Here, we demonstrate a 3D printed graphene aerogel electrode with MnO2 loading of 182.2 mg cm−2, which achieves a record-high areal capacitance of 44.13 F cm−2. Most importantly, this 3D printed graphene aerogel/MnO2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors
El-Kady, M. F., Strong, V., Dubin, S., & Kaner, R. B. (2012) · Science · doi:10.1126/science.1216744 · Cited by 4,008
Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials
Acerce, M., Voiry, D., & Chhowalla, M. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.40 · Cited by 2,797
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
Research works printed but not linked: 10
- Song, 2017, Ostwald ripening improves rate capability of high mass loading manganese oxide for supercapacitors, ACS Energy Lett., 2, 1752, 10.1021/acsenergylett.7b00405 · doi:10.1021/acsenergylett.7b00405
- Kang, 2013, Enhanced supercapacitor performance of MnO2 by atomic doping, Angew. Chem. Int. Ed., 52, 1664, 10.1002/anie.201208993 · doi:10.1002/anie.201208993
- Hu, 2011, Symmetrical MnO2-carbon nanotube-textile nanostructures for wearable pseudocapacitors with high mass loading, ACS Nano, 5, 8904, 10.1021/nn203085j · doi:10.1021/nn203085j
- Yang, 2014, Nanostructured porous MnO2 on Ni foam substrate with a high mass loading via a CV electrodeposition route for supercapacitor application, Electrochim. Acta, 136, 189, 10.1016/j.electacta.2014.05.074 · doi:10.1016/j.electacta.2014.05.074
- Lv, 2012, Carbon fabric-aligned carbon nanotube/MnO2/conducting polymers ternary composite electrodes with high utilization and mass loading of MnO2 for super-capacitors, J. Power Sources, 220, 160, 10.1016/j.jpowsour.2012.07.073 · doi:10.1016/j.jpowsour.2012.07.073
- Yao, 2016, Flexible transparent molybdenum trioxide nanopaper for energy storage, Adv. Mater., 28, 6353, 10.1002/adma.201600529 · doi:10.1002/adma.201600529
- Vinny, 2016, An excellent cycle performance of asymmetric supercapacitor based on bristles like α-MnO2 nanoparticles grown on multiwalled carbon nanotubes, J. Power Sources, 309, 212, 10.1016/j.jpowsour.2016.01.098 · DOI
- Wang, 2018, Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor, Nano Energy, 49, 481, 10.1016/j.nanoen.2018.05.002 · doi:10.1016/j.nanoen.2018.05.002
- Nakayama, 2016, Direct growth of birnessite-type MnO2 on treated carbon cloth for a flexible asymmetric supercapacitor with excellent cycling stability, J. Electrochem. Soc., 163, A2340, 10.1149/2.1031610jes · doi:10.1149/2.1031610jes
- Song, 2017, Amorphous mixed-valence vanadium oxide/exfoliated carbon cloth structure shows a record high cycling stability, Small, 13, 1700067, 10.1002/smll.201700067 · doi:10.1002/smll.201700067
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
Rechargeable aqueous Zn-based energy storage devices
Liu, Y., Lu, X., Lai, F., Liu, T., Shearing, P. R., Parkin, I. P., He, G., & Brett, D. J. L. (2021) · Joule · doi:10.1016/j.joule.2021.10.011 · Cited by 471
Non-metallic charge carriers for aqueous batteries
Liang, G., Mo, F., Ji, X., & Zhi, C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00241-4 · Cited by 461
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Yong, B., Ma, D., Wang, Y., Mi, H., He, C., & Zhang, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002354 · Cited by 395
Advanced carbon nanomaterials for state-of-the-art flexible supercapacitors
Xie, P., Yuan, W., Liu, X., Peng, Y., Yin, Y., Li, Y., & Wu, Z. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.12.011 · Cited by 386
Self-citationKumar, R., Sahoo, S., Joanni, E., Singh, R. K., Yadav, R. M., Verma, R. K., Singh, D. P., Tan, W. K., Pérez del Pino, A., Moshkalev, S. A., et al. (2019) · Nano Research · doi:10.1007/s12274-019-2467-8 · Cited by 383
Guo, W., Yu, C., Li, S., & Qiu, J. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02649b · Cited by 344
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Self-citationPrinted aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Yao, B., Chandrasekaran, S., Zhang, H., Ma, A., Kang, J., Zhang, L., Lu, X., Qian, F., Zhu, C., Duoss, E. B., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906652 · Cited by 305
Self-citationZheng, S., Wang, H., Das, P., Zhang, Y., Cao, Y., Ma, J., Liu, S. (., & Wu, Z. (2021) · Advanced Materials · doi:10.1002/adma.202005449 · Cited by 300
Wide Voltage Aqueous Asymmetric Supercapacitors: Advances, Strategies, and Challenges
Huang, J., Yuan, K., & Chen, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108107 · Cited by 289
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Self-citationDirect ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Self-citationLv, H., Pan, Q., Song, Y., Liu, X.-X., & Liu, T. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-00451-z · Cited by 254
Silica Aerogel: Synthesis, Characterization, Applications, and Recent Advancements
Rashid, A. B., Shishir, S. I., Mahfuz, M. A., Hossain, M. T., & Hoque, M. E. (2023) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202200186 · Cited by 86
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
Self-citation
Metadata
- Authors
- Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 3
- Issue
- 2
- Pages
- 459-470
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2896777062
- Cited by
- 491
- References
- 35
- FWCI
- 14.95
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (vor, 384 d)
- Funders
- NSF (MRI-1126845)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.