The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Titanium-Perovskite-Supported RuO2 Nanoparticles for Photocatalytic CO2 Methanation
Open accessAbstract
Summary This manuscript reports the photothermal activity for CO2 methanation of RuO2 nanoparticles supported on strontium titanate (STO) operating at 150°C under simulated sunlight irradiation. The RuO2/STO sample having the optimal performance exhibits under ultraviolet-visible (UV-vis) irradiation with a power of 108 mW/cm2 at 150°C a CH4 production rate of 14.6 mmol CH4 h−1 g−1. The photoresponse of the material is mainly due to UV photons, although RuO2/STO still retains about 50% efficiency under visible light irradiation (>400 nm). Mechanistic studies are compatible with a photothermal process with minor contribution of photocatalytic electron-hole pair charge separation. The photocatalyst is efficient enough to also operate under continuous flow conditions, achieving with a contact time of 3 s at 150°C under about 1 sun irradiation a steady-state CH4 production rate of 30 μmol h−1 for an 8-h-long experiment. This value ranks the material among the most efficient methanation photocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kondratenko, E. V., Mul, G., Baltrusaitis, J., Larrazábal, G. O., & Pérez-Ramírez, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41272e · Cited by 1,802
Resolving ruthenium: XPS studies of common ruthenium materials
Morgan, D. J. (2015) · Surface and Interface Analysis · doi:10.1002/sia.5852 · Cited by 1,199
A Particulate Photocatalyst Water-Splitting Panel for Large-Scale Solar Hydrogen Generation
Goto, Y., Hisatomi, T., Wang, Q., Higashi, T., Ishikiriyama, K., Maeda, T., Sakata, Y., Okunaka, S., Tokudome, H., Katayama, M., et al. (2018) · Joule · doi:10.1016/j.joule.2017.12.009 · Cited by 754
Cited by
Gong, E., Ali, S., Hiragond, C. B., Kim, H. S., Powar, N. S., Kim, D., Kim, H., & In, S.-I. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02714j · Cited by 805
Fundamentals and applications of photo-thermal catalysis
Mateo, D., Cerrillo, J. L., Durini, S., & Gascon, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00357c · Cited by 799
Self-citationPerovskite Oxide Based Materials for Energy and Environment-Oriented Photocatalysis
Kumar, A., Kumar, A., & Krishnan, V. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c02947 · Cited by 636
Greenhouse-inspired supra-photothermal CO2 catalysis
Cai, M., Wu, Z., Li, Z., Wang, L., Sun, W., Tountas, A. A., Li, C., Wang, S., Feng, K., Xu, A.-B., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00867-w · Cited by 472
Black indium oxide a photothermal CO2 hydrogenation catalyst
Wang, L., Dong, Y., Yan, T., Hu, Z., Ali, F. M., Meira, D. M., Duchesne, P. N., Loh, J. Y. Y., Qiu, C., Storey, E. E., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16336-z · Cited by 355
Metadata
- Authors
- Mateo, D., Albero, J., & García, H.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 3
- Issue
- 8
- Pages
- 1949-1962
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2953433587
- Cited by
- 164
- References
- 3
- FWCI
- 3.50
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.