An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Lithium-ion batteries have been widely adopted in electric vehicles (EVs), and accurate state of charge (SOC) estimation is of paramount importance for the EV battery management system. Though a number of methods have been proposed, the SOC estimation for Lithium-ion batteries, such as LiFePo4 battery, however, faces two key challenges: the flat open circuit voltage (OCV) vs SOC relationship for some SOC ranges and the hysteresis effect. To address these problems, an integrated approach for real-time model-based SOC estimation of Lithium-ion batteries is proposed in this paper. Firstly, an auto-regression model is adopted to reproduce the battery terminal behaviour, combined with a non-linear complementary model to capture the hysteresis effect. The model parameters, including linear parameters and non-linear parameters, are optimized off-line using a hybrid optimization method that combines a meta-heuristic method (i.e., the teaching learning based optimization method) and the least square method. Secondly, using the trained model, two real-time model-based SOC estimation methods are presented, one based on the real-time battery OCV regression model achieved through weighted recursive least square method, and the other based on the state estimation using the extended Kalman filter method (EKF). To tackle the problem caused by the flat OCV-vs-SOC segments when the OCV-based SOC estimation method is adopted, a method combining the coulombic counting and the OCV-based method is proposed. Finally, modelling results and SOC estimation results are presented and analysed using the data collected from LiFePo4 battery cell. The results confirmed the effectiveness of the proposed approach, in particular the joint-EKF method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837 · cited 3×
“org/wiki/Electric_vehicle_battery [3] L.”
BackgroundMethodInfluentialExtended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 3×
“Plett [38, 15] proposed using two different methods, joint state estimation or dual state and parameter estimation, to track both battery state and timevarying model parameters in real-time.”
BackgroundMethodHe, H., Xiong, R., & Fan, J. (2011) · Energies · doi:10.3390/en4040582 · Cited by 1,180
The State of Charge Estimating Methods for Battery: A Review
Chang, W.-Y. (2013) · ISRN Applied Mathematics · doi:10.1155/2013/953792 · Cited by 650
Sun, F., Hu, X., Zou, Y., & Li, S. (2011) · Energy · doi:10.1016/j.energy.2011.03.059 · Cited by 614 · cited 2×
“, LiB, LiFePo4 batteries), for most of which the SOC estimation errors are around 2% [15, 38, 12, 14, 34, 39].”
BackgroundMethodDetermination of state-of-charge and state-of-health of batteries by fuzzy logic methodology
Salkind, A. J., Fennie, C., Singh, P., Atwater, T., & Reisner, D. E. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00079-8 · Cited by 457 · cited 1×
“Many SOC estimation methods based on black-box models have been proposed, such as neural networks [30, 31], fuzzy logic [32], support vector machine 190”
MethodSupport vector based battery state of charge estimator
Hansen, T., & Wang, C.-J. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.020 · Cited by 347
Cited by
Machine learning technology in biodiesel research: A review
Aghbashlo, M., Peng, W., Tabatabaei, M., Kalogirou, S. A., Soltanian, S., Hosseinzadeh-Bandbafha, H., Mahian, O., & Lam, S. S. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100904 · Cited by 426
Zhang, C., Allafi, W., Dinh, Q., Ascencio, P., & Marco, J. (2018) · Energy · doi:10.1016/j.energy.2017.10.043 · Cited by 350
Self-citationState of the Art of Lithium-Ion Battery SOC Estimation for Electrical Vehicles
Zhang, R., Xia, B., Li, B., Cao, L., Lai, Y., Zheng, W., Wang, H., & Wang, W. (2018) · Energies · doi:10.3390/en11071820 · Cited by 321
Xiong, R., Yu, Q., Wang, L. Y., & Lin, C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.136 · Cited by 293
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries
Li, X., Wu, G., Chang, F., Xia, W., Sun, S., & Shen, Y. (2025) · Batteries · doi:10.3390/batteries11120446 · Cited by 2
“Physics-based approaches—such as Coulomb counting and open-circuit voltage (OCV) methods, electrochemical impedance spectroscopy—offer mechanistic rigor but are often computationally intensive, less adaptive, or require rest periods for OCV calibration [8–10].”
Metadata
- Authors
- Zhang, C., Li, K., Pei, L., & Zhu, C.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2015-06
- Volume
- 283
- Pages
- 24-36
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2033226398
- Cited by
- 102
- References
- 7
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries. https://app.cochat.ai/papers/10.1016/j.jpowsour.2015.02.099
- The paper
- Zhang, C., Li, K., Pei, L., & Zhu, C. (2015). An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2015.02.099
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.