A comparison of rotating disc electrode, floating electrode technique and membrane electrode assembly measurements for catalyst testing
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The development of new catalysts for low temperature fuel cells requires accurate characterization techniques to evaluate their performance. As initially only small amounts of catalyst are available, preliminary screening must rely on suitable test methods. In this work, using a carbon supported platinum benchmark catalyst, the rotating disc electrode (RDE) technique was revisited in order to develop a detailed testing protocol leading to comparable results between different laboratories. The RDE results were validated by comparison with data measured both in proton exchange membrane single cells and via the relatively new floating electrode technique. This method can be operated with small amounts of catalyst but does not suffer from low limiting currents and allows prediction of high current capability of newly developed catalysts. Different durability testing protocols were tested with all three methods. Such protocols need to be able to introduce changes in the reference catalyst, but must not be too harsh as otherwise they cannot be applied to alloy catalysts. In all protocols an upper potential limit of 0.925 V was used, as this produced degradation in the chosen benchmark catalyst, but still represents realistic conditions for alloy catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co
Toda, T., Igarashi, H., Uchida, H., & Watanabe, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392544 · Cited by 1,336
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Markovic, N. M., & Ross, P. N. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00349-3 · Cited by 560
Cited by
Chen, F.-Y., Wu, Z.-Y., Adler, Z., & Wang, H. (2021) · Joule · doi:10.1016/j.joule.2021.05.005 · Cited by 1,284
Fan, J., Chen, M., Zhao, Z., Zhang, Z., Ye, S., Xu, S., Wang, H., & Li, H. (2021) · Nature Energy · doi:10.1038/s41560-021-00824-7 · Cited by 635
Anion-exchange membrane water electrolyzers and fuel cells
Yang, Y., Li, P., Zheng, X., Sun, W., Dou, S. X., Ma, T., & Pan, H. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00038e · Cited by 575
Oxygen Reduction Electrocatalysts toward Practical Fuel Cells: Progress and Perspectives
Zaman, S., Huang, L., Douka, A. I., Yang, H., You, B., & Xia, B. Y. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202016977 · Cited by 484
Molecular Design of Single‐Atom Catalysts for Oxygen Reduction Reaction
Wan, C., Duan, X., & Huang, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903815 · Cited by 439
Metadata
- Authors
- Martens, S., Asen, L., Ercolano, G., Dionigi, F., Zalitis, C., Hawkins, A., Martinez Bonastre, A., Seidl, L., Knoll, A. C., Sharman, J., Strasser, P., Jones, D., & Schneider, O.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 392
- Pages
- 274-284
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2804150812
- Cited by
- 120
- References
- 7
- FWCI
- 4.99
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A comparison of rotating disc electrode, floating electrode technique and membrane electrode assembly measurements for catalyst testing. https://app.cochat.ai/papers/10.1016/j.jpowsour.2018.04.084
- The paper
- Martens, S., Asen, L., Ercolano, G., Dionigi, F., Zalitis, C., Hawkins, A., Martinez Bonastre, A., Seidl, L., Knoll, A. C., Sharman, J., Strasser, P., Jones, D., & Schneider, O. (2018). A comparison of rotating disc electrode, floating electrode technique and membrane electrode assembly measurements for catalyst testing. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2018.04.084
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.