Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract Electrochemical performance of lithium-ion batteries drops significantly at low temperatures, especially under charging, because the lithium ions are prone to deposit as lithium metal on instead of intercalating into the solid matrix of anode. At discharging, the existence of lithium stripping leads to the capacity reversed partially, whose amount is proportional to the width of extra voltage plateau displayed at the beginning. A physics-based electrochemical-thermal model considering effects of lithium plating/stripping is developed and validated to explore the degradation mechanism and behaviors of NMC/Carbon cells undergoing prolonged cycling. The temporal and spatial analyses of overpotential of lithium plating and surface concentration in solid phase at various operating conditions demonstrate that lithium plating starts to take place at the interface between composite anode and separator, and the degradation can be accelerated by the decreasing ambient temperatures and increasing charging current rates. The degradation effects including loss of recyclable lithium ions, loss of anode active material, growth of plated lithium and secondary solid electrolyte interphase (SEI) and consumption of electrolyte solvents are considered. The model is capable of estimating capacity as a function of cycle number with an overall accuracy of 3% if the capacity fade is less than 30%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“[27] firstly proposed the equations that describe the lithium deposition reaction at overcharge based on Doyle's model [28].”
BackgroundAgeing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
Lithium plating in a commercial lithium-ion battery – A low-temperature aging study
Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Cited by
Lithium ion battery degradation: what you need to know
Edge, J. S., O’Kane, S., Prosser, R., Kirkaldy, N. D., Patel, A. N., Hales, A., Ghosh, A., Ai, W., Chen, J., Yang, J., et al. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp00359c · Cited by 1,189
Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Lithium-ion battery degradation: how to model it
O'Kane, S. E. J., Ai, W., Madabattula, G., Alonso-Alvarez, D., Timms, R., Sulzer, V., Edge, J. S., Wu, B., Offer, G. J., & Marinescu, M. (2022) · Physical Chemistry Chemical Physics · doi:10.1039/d2cp00417h · Cited by 400
Wang, S., Takyi-Aninakwa, P., Jin, S., Yu, C., Fernandez, C., & Stroe, D.-I. (2022) · Energy · doi:10.1016/j.energy.2022.124224 · Cited by 355
Metadata
- Authors
- Zhao, X., Yin, Y., Hu, Y., & Choe, S.-Y.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 418
- Pages
- 61-73
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2913683666
- Cited by
- 128
- References
- 6
- FWCI
- 5.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures. https://app.cochat.ai/papers/10.1016/j.jpowsour.2019.02.001
- The paper
- Zhao, X., Yin, Y., Hu, Y., & Choe, S.-Y. (2019). Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2019.02.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.