The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A review on sintering technology of proton conducting BaCeO3-BaZrO3 perovskite oxide materials for Protonic Ceramic Fuel Cells
Abstract
Abstract Ceramic proton conductors can reduce the operating temperature of solid oxide fuel cells (SOFCs) to the intermediate temperature range, 400-600 °C, due to their higher ionic conductivity in comparison to oxide-ion conductors under these conditions. Nonetheless, the most promising proton conducting materials, typically yttrium-doped barium cerates and zirconates with nominal compositions: BaCe1-xYxO3-δ (BCY), BaZr1-xYxO3-δ (BZY) and Ba(Ce,Zr)1-yYyO3-δ (BCZY) exhibit major challenges with respect to the production of dense electrolyte membranes. To improve the processing of these materials, liquid phase sintering (LPS) induced by the addition of transition and alkali metal oxides as sintering additives, is proposed as an effective way to promote densification, where the benefits of LPS may be further extended when this method is used in combination with solid-state reactive sintering (SSRS) to reduce the fabrication time and cost. Nonetheless, recent literature highlights that the addition of these sintering additives can have highly negative secondary impacts on bulk transport properties and overall fuel cell performance. This review summarises the recent developments and the innovative methods employed to overcome the processing difficulties in these materials, including diverse potential sintering methods, the effect of different sintering additives and their impact on densification, ionic transport and electrochemical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
THE PRINCIPLES DETERMINING THE STRUCTURE OF COMPLEX IONIC CRYSTALS
Pauling, L. (1929) · Journal of the American Chemical Society · doi:10.1021/ja01379a006 · Cited by 2,025
Review of electrochemical ammonia production technologies and materials
Giddey, S., Badwal, S. P. S., & Kulkarni, A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.09.054 · Cited by 886
Cited by
Hydrogen energy: development prospects and materials
Filippov, S. P., & Yaroslavtsev, A. B. (2021) · Russian Chemical Reviews · doi:10.1070/rcr5014 · Cited by 295
Metadata
- Authors
- Loureiro, F. J. A., Nasani, N., Reddy, G. S., Munirathnam, N. R., & Fagg, D. P.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 438
- Pages
- 226991
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2969096053
- Cited by
- 206
- References
- 3
- FWCI
- 6.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on sintering technology of proton conducting BaCeO3-BaZrO3 perovskite oxide materials for Protonic Ceramic Fuel Cells. https://app.cochat.ai/papers/10.1016/j.jpowsour.2019.226991
- The paper
- Loureiro, F. J. A., Nasani, N., Reddy, G. S., Munirathnam, N. R., & Fagg, D. P. (2019). A review on sintering technology of proton conducting BaCeO3-BaZrO3 perovskite oxide materials for Protonic Ceramic Fuel Cells. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2019.226991
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.