Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
This work demonstrates the fabrication and processing steps required to produce high performance fuel cell membrane electrode assemblies (MEAs) based on spray-coated gas-diffusion electrodes (GDEs). It is demonstrated that coating the catalyst layer with a thin layer of ionomer and then hot pressing the GDEs to the membrane is required to achieve comparable catalyst activity and air performance to catalyst-coated-membrane MEAs. We show that there is a critical amount of ionomer required to achieve maximized performance. Using electron microscopy, we show that the combination of the ionomer overlayer and hot-pressing bonds the catalyst layer to the membrane, increasing the interfacial contact area and quality of this interface. We also find that the ionomer overlayer smooths the surface of the GDE and provides increased contact area between the GDE and the membrane. Additionally, we demonstrate that much less ionomer is required for high-performance than has been previously reported. Through model fitting of electrochemical impedance spectroscopy, we show that this improvement in the catalyst layer – membrane interface reduces the effective catalyst layer resistance, which reduces Ohmic losses and increases catalyst utilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
A comparative study of CCM and hot-pressed MEAs for PEM fuel cells
Tang, H., Wang, S., Jiang, S. P., & Pan, M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.062 · Cited by 125
Setzler, B. P., & Fuller, T. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0361506jes · Cited by 117
Fabrication of a thin catalyst layer using organic solvents
Yang, T.-H., Yoon, Y.-G., Park, G.-G., Lee, W.-Y., & Kim, C.-S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.018 · Cited by 74
Kusano, T., Hiroi, T., Amemiya, K., Ando, M., Takahashi, T., & Shibayama, M. (2015) · Polymer Journal · doi:10.1038/pj.2015.36 · Cited by 74
Investigation of the Impact of Interfacial Delamination on Polymer Electrolyte Fuel Cell Performance
Kim, S., Khandelwal, M., Chacko, C., & Mench, M. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3006398 · Cited by 58
Cited by
Chen, M., Zhao, C., Sun, F., Fan, J., Li, H., & Wang, H. (2020) · eTransportation · doi:10.1016/j.etran.2020.100075 · Cited by 212
Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Self-citationDevelopment of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells
Mauger, S. A., Wang, M., Cetinbas, F. C., Dzara, M. J., Park, J., Myers, D. J., Ahluwalia, R. K., Pylypenko, S., Hu, L., Litster, S., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230039 · Cited by 84
Self-citationLi, J., Cui, N., Liu, D., Zhao, Z., Yang, F., Zhong, J., & Pang, J. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.08.334 · Cited by 65
Song, Y., Guo, Z., Yin, J., Liu, M., Tolj, I., Grigoriev, S. A., Ge, M., & Sun, C. (2025) · Polymers · doi:10.3390/polym17162181 · Cited by 28
Metadata
- Authors
- Mauger, S. A., Pfeilsticker, J. R., Wang, M., Medina, S., Yang-Neyerlin, A. C., Neyerlin, K. C., Stetson, C., Pylypenko, S., & Ulsh, M.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 450
- Pages
- 227581
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3003803236
- Cited by
- 67
- References
- 8
- FWCI
- 2.87
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies. https://app.cochat.ai/papers/10.1016/j.jpowsour.2019.227581
- The paper
- Mauger, S. A., Pfeilsticker, J. R., Wang, M., Medina, S., Yang-Neyerlin, A. C., Neyerlin, K. C., Stetson, C., Pylypenko, S., & Ulsh, M. (2020). Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2019.227581
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.