A review of particle damping modeling and testing
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
This survey provides an overview of the different approaches seen in the literature concerning particle damping. The emphasis is on particle dampers used on beams vibrating at frequencies between 10 Hz and 1 kHz. Design examples, analytical formulations, numerical models, and experimental setups for such dampers are gathered. Modeling approaches are presented both for particle interaction and for systems equipped with particle dampers. The consequences of the nonlinear behavior of particle dampers are brought to attention. As such, the apparent contradictions of the conclusions and approaches presented in the literature are highlighted. A list of particle simulation software and their use in the literature is provided. Most importantly, a suggested approach to create a sound numerical simulation of a particle damper and the accompanying experimental tests is given. It consists of setting up a discrete element method simulation, calibrating it with literature data and a representative damper experiment, and testing it outside of the range of operation used for the tuning.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527 · cited 3×
“The original DEM implementation [51] relies on a linear, Hooke, normal elastic force to which a linear viscous force is added.”
A new model for control of systems with friction
Canudas de Wit, C., Olsson, H., Astrom, K. J., & Lischinsky, P. (1995) · IEEE Transactions on Automatic Control · doi:10.1109/9.376053 · Cited by 3,685 · cited 2×
“No report of using a dynamic, state-dependent, friction model of the LuGre-type [83,86] is seen in the literature.”
Elastic Spheres in Contact Under Varying Oblique Forces
Mindlin, R. D., & Deresiewicz, H. (1953) · Journal of Applied Mechanics · doi:10.1115/1.4010702 · Cited by 2,782
Jamming, Force Chains, and Fragile Matter
Cates, M. E., Wittmer, J. P., Bouchaud, J., & Claudin, P. (1998) · Physical Review Letters · doi:10.1103/physrevlett.81.1841 · Cited by 1,185
Compliant contact force models in multibody dynamics: Evolution of the Hertz contact theory
Machado, M., Moreira, P., Flores, P., et al. (2012) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2012.02.010 · Cited by 715
Restitution Coefficient in a Collision between Two Spheres
Kuwabara, G., & Kono, K. (1987) · Japanese Journal of Applied Physics · doi:10.1143/jjap.26.1230 · Cited by 610 · cited 5×
“Other plastic portions are either based on the fourth root of the displacement multiplied by the velocity [56,60,80] or on the proposal of Kuwabara-Kono [62].”
InfluentialParameters and contact models for DEM simulations of agricultural granular materials: A review
Horabik, J., & Molenda, M. (2016) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2016.02.017 · Cited by 468 · cited 6×
“Further discussion on contact models for DEM can be found in Horabik and Molenda [74] and Machado et al. [93].”
InfluentialNonsmooth Mechanics: Models, Dynamics and Control
Brogliato, B. (2016) · Communications and Control Engineering · doi:10.1007/978-3-319-28664-8 · Cited by 447
A new open-source software developed for numerical simulations using discrete modeling methods
Kozicki, J., & Donzé, F. V. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.05.023 · Cited by 303 · cited 1×
“Kozicki and Donzé [99] noted that coupling DEM with other simulation methods such as FEM is either not feasible because the software is commercial or time consuming for open source alternatives.”
Particle impact dampers: Past, present, and future
Lu, Z., Wang, Z., Masri, S. F., & Lu, X. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2058 · Cited by 285
Cited by
Li, H., Li, A., Kong, X., & Xiong, H. (2022) · Nonlinear Dynamics · doi:10.1007/s11071-022-07253-5 · Cited by 58
Metadata
- Authors
- Gagnon, L., Morandini, M., & Ghiringhelli, G. L.
- Venue
- Journal of Sound and Vibration
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 459
- Pages
- 114865
- ISSN
- 0022-460X (ISSN-L)
- OpenAlex
- W2965155144
- Cited by
- 159
- References
- 43
- FWCI
- 7.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.