The DOI matches its Crossref record; 183 of the 183 references it cites were found in a registry or an index.
Advances in geopolymer materials: A comprehensive review
Open accessAbstract
Geopolymer is a new environment-friendly cementitious material, and the development of geopolymer can reduce the carbon dioxide emission caused by the development of cement industry. Geopolymer materials not only have excellent mechanical properties, but also have a series of excellent properties such as fire resistance and corrosion resistance. Most industrial solid waste and waste incineration bottom ash are piled up at will, which not only occupies land resources, but also has a bad impact on the environment. Recycling them can be used as raw materials for preparing geopolymers. Geopolymer materials can effectively adsorb heavy metals, dyes, and other radioactive pollution, which is very beneficial to society's future development. However, due to the excellent properties of geopolymer materials, its application goes beyond that. Some useful information about geopolymer materials was introduced in this paper. The paper included the geopolymerization, the source of raw materials, the types of activators, the preparation methods, and the different application fields of geopolymer materials. The factors affecting the fresh properties and mechanical properties of geopolymer materials were discussed. In this paper, the shortcomings and application limitations of geopolymer materials were summarized, and their progress was summarized to lay a theoretical foundation for the long-term development of geopolymer materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Kinetics of geopolymerization: Role of Al2O3 and SiO2
Silva, P. D., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.003 · Cited by 916
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Additive manufacturing of geopolymer for sustainable built environment
Panda, B., Paul, S. C., Hui, L. J., Tay, Y. W. D., & Tan, M. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.165 · Cited by 516
Zhang, Z., Wang, H., Provis, J. L., Bullen, F., Reid, A., & Zhu, Y. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.03.021 · Cited by 494
Drying shrinkage in alkali-activated binders – A critical review
Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.125 · Cited by 468
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Applications of fly ash for CO2 capture, utilization, and storage
Dindi, A., Quang, D. V., Vega, L. F., Nashef, E., & Abu-Zahra, M. R. M. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.11.011 · Cited by 399
Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer
Wang, Y., Liu, X., Zhang, W., Li, Z., Zhang, Y., Li, Y., & Ren, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118852 · Cited by 395
An overview of geopolymers derived from industrial by-products
Mehta, A., & Siddique, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.136 · Cited by 391
Processing, properties and applications of highly porous geopolymers: A review
Bai, C., & Colombo, P. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.219 · Cited by 391
Saha, S., & Rajasekaran, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.139 · Cited by 380
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Geopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.290 · Cited by 360
Xiao, R., Ma, Y., Jiang, X., Zhang, M., Zhang, Y., Wang, Y., Huang, B., & He, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119610 · Cited by 359
Graphene nanoplatelet-fly ash based geopolymer composites
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.06.003 · Cited by 341
Aiken, T. A., Kwasny, J., Sha, W., & Soutsos, M. N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.011 · Cited by 338
Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.184 · Cited by 335
Zhang, P., Wang, K., Li, Q., Wang, J., & Ling, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120896 · Cited by 334
Phummiphan, I., Horpibulsuk, S., Rachan, R., Arulrajah, A., Shen, S.-L., & Chindaprasirt, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.07.067 · Cited by 332
Mehta, A., & Siddique, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.313 · Cited by 325
Geopolymerisation kinetics. 2. Reaction kinetic modelling
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.028 · Cited by 323
Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review
Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.206 · Cited by 315
Liu, J., Hu, L., Tang, L., & Ren, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123451 · Cited by 311
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Chindaprasirt, P., & Chalee, W. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.010 · Cited by 301
AL-MASHHADANI, M. M. M., Canpolat, O., Aygörmez, Y., Uysal, M., & Erdem, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.061 · Cited by 295
A brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer
Rashad, A. M. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.10.002 · Cited by 291
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag
Li, W., & Yi, Y. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117713 · Cited by 280
Properties and characterization of green one-part geopolymer activated by composite activators
Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.159 · Cited by 273
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
High calcium fly ash geopolymer mortar containing Portland cement for use as repair material
Phoo-ngernkham, T., Sata, V., Hanjitsuwan, S., Ridtirud, C., Hatanaka, S., & Chindaprasirt, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.139 · Cited by 262
Zhang, Z., Provis, J. L., Wang, H., et al. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.01.040 · Cited by 250
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.152 · Cited by 247
Improving strength of calcinated coal gangue geopolymer mortars via increasing calcium content
Huang, G., Ji, Y., Li, J., Hou, Z., & Dong, Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.005 · Cited by 247
An overview on the reuse of waste glasses in alkali-activated materials
Liu, Y., Shi, C., Zhang, Z., & Li, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.007 · Cited by 246
Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: A review
Jindal, B. B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.08.025 · Cited by 242
Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates
Hu, Y., Tang, Z., Li, W., Li, Y., & Tam, V. W. Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.211 · Cited by 239
Assi, L. N., Eddie Deaver, E., & Ziehl, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.193 · Cited by 235
Tchakouté, H. K., & Rüscher, C. H. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.02.002 · Cited by 234
Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder
Ravikumar, D., Peethamparan, S., & Neithalath, N. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.03.007 · Cited by 229
Mechanical properties and microstructure analysis of FA-GGBS-HMNS based geopolymer concrete
Bouaissi, A., Li, L.-Y., Al Bakri Abdullah, M. M., & Bui, Q.-B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.202 · Cited by 226
Natural fiber reinforced high calcium fly ash geopolymer mortar
Wongsa, A., Kunthawatwong, R., Naenudon, S., Sata, V., & Chindaprasirt, P. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118143 · Cited by 219
Zhang, J., Zhang, S., & Liu, B. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119507 · Cited by 216
Hoy, M., Rachan, R., Horpibulsuk, S., Arulrajah, A., & Mirzababaei, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.243 · Cited by 213
Novais, R. M., Carvalheiras, J., Tobaldi, D. M., Seabra, M. P., Pullar, R. C., & Labrincha, J. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.265 · Cited by 208
Setting time and 7-day strength of geopolymer mortar with various binders
Elyamany, H. E., Abd Elmoaty, A. E. M., & Elshaboury, A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.025 · Cited by 207
Ren, D., Yan, C., Duan, P., Zhang, Z., Li, L., & Yan, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.103 · Cited by 204
Hadi, M. N. S., Al-Azzawi, M., & Yu, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.092 · Cited by 199
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Longhi, M. A., Rodríguez, E. D., Walkley, B., Zhang, Z., & Kirchheim, A. P. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107671 · Cited by 196
Masi, G., Rickard, W. D. A., Bignozzi, M. C., & van Riessen, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.02.023 · Cited by 194
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107826 · Cited by 192
The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes
Alrefaei, Y., Wang, Y.-S., & Dai, J.-G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.027 · Cited by 190
Punurai, W., Kroehong, W., Saptamongkol, A., & Chindaprasirt, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.115 · Cited by 189
Xia, M., Nematollahi, B., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.013 · Cited by 189
Carbonation in the pore solution of metakaolin-based geopolymer
Pouhet, R., & Cyr, M. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.05.008 · Cited by 188
Development of high strength one-part geopolymer mortar using sodium metasilicate
Dong, M., Elchalakani, M., & Karrech, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117611 · Cited by 187
Durability of low‑calcium fly ash based geopolymer concrete culvert in a saline environment
Pasupathy, K., Berndt, M., Sanjayan, J., Rajeev, P., & Cheema, D. S. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.07.010 · Cited by 183
Mix composition and characterisation of one-part geopolymers with different activators
Askarian, M., Tao, Z., Samali, B., Adam, G., & Shuaibu, R. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.083 · Cited by 182
Lahoti, M., Wong, K. K., Tan, K. H., & Yang, E.-H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.023 · Cited by 167
Pervious concrete made of alkali activated slag and geopolymers
Sun, Z., Lin, X., & Vollpracht, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.067 · Cited by 167
Adsorbent materials based on a geopolymer paste for dye removal from aqueous solutions
Maleki, A. R., Mohammad, M., Emdadi, Z., Asim, N., Azizi, M., & Safaei, J. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.08.011 · Cited by 164
Hassan, H. S., Abdel-Gawwad, H. A., Vásquez-García, S. R., Israde-Alcántara, I., Flores-Ramirez, N., Rico, J. L., & Mohammed, M. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.137 · Cited by 162
Jindal, B. B., & Sharma, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119028 · Cited by 161
Zhang, M., Zhao, M., Zhang, G., Sietins, J. M., Granados-Focil, S., Pepi, M. S., Xu, Y., & Tao, M. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.008 · Cited by 158
Koushkbaghi, M., Alipour, P., Tahmouresi, B., Mohseni, E., Saradar, A., & Sarker, P. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.174 · Cited by 158
Mohammed, B. S., Haruna, S., Wahab, M. M. A., Liew, M. S., & Haruna, A. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02255 · Cited by 155
Tchakouté, H. K., Rüscher, C. H., Kong, S., & Ranjbar, N. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.04.007 · Cited by 154
Geopolymers as solid adsorbent for CO2 capture
Minelli, M., Medri, V., Papa, E., Miccio, F., Landi, E., & Doghieri, F. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.04.013 · Cited by 153
Yang, Z., Mocadlo, R., Zhao, M., Sisson, R. D., Tao, M., & Liang, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.034 · Cited by 149
Porosity and insulating properties of silica-fume based foams
Papa, E., Medri, V., Kpogbémabou, D., Morinière, V., Laumonier, J., Vaccari, A., & Rossignol, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.031 · Cited by 147
Bong, S. H., Nematollahi, B., Nazari, A., Xia, M., & Sanjayan, J. (2019) · Materials · doi:10.3390/ma12060902 · Cited by 147
Hoy, M., Horpibulsuk, S., Rachan, R., Chinkulkijniwat, A., & Arulrajah, A. (2016) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2016.08.078 · Cited by 146
Incorporation of strontium and calcium in geopolymer gels
Walkley, B., Ke, X., Hussein, O. H., Bernal, S. A., & Provis, J. L. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121015 · Cited by 146
Lokuge, W. P., Wilson, A., Gunasekara, C., Law, D. W., & Setunge, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.175 · Cited by 145
Li, Y., Min, X., Ke, Y., Chai, L., Shi, M.-Q., Tang, C., Wang, Q., Liang, Y., Lei, J. H., & Liu, D.-G. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.046 · Cited by 138
Cheah, C. B., Tan, L. E., & Ramli, M. B. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.12.056 · Cited by 136
Tosti, L., Zomeren, A. V., Pels, J. R., & Comans, R. N. J. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.03.004 · Cited by 134
Yu, J., Chen, Y., Chen, G., & Wang, L. (2019) · Engineering Geology · doi:10.1016/j.enggeo.2019.105316 · Cited by 134
Microstructure of sodium polysialate siloxo geopolymer
Schmücker, M., & MacKenzie, K. J. D. (2004) · Ceramics International · doi:10.1016/j.ceramint.2004.06.006 · Cited by 133
Shill, S. K., Al‐Deen, S., Ashraf, M., & Hutchison, W. D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117886 · Cited by 132
Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity
Bondar, D., Ma, Q., Soutsos, M. N., Basheer, M., Provis, J. L., & Nanukuttan, S. V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.124 · Cited by 130
Nkwaju, R. Y., Djobo, J. N. Y., Fekoua, J. N. N., Mejouyo, P. W. H., Nemaleu, J. G. D., & Courard, L. (2019) · Applied Clay Science · doi:10.1016/j.clay.2019.105333 · Cited by 127
Al-Azzawi, M., Yu, T., & Hadi, M. N. S. (2018) · Structures · doi:10.1016/j.istruc.2018.03.010 · Cited by 125
Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9653-7 · Cited by 124
Effect of limestone dosages on some properties of geopolymer from thermally activated halloysite
Bayiha, B. N., Billong, N., Yamb, E., Kaze, C. R., & Nzengwa, R. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.058 · Cited by 124
Alkali-silica reaction (ASR) in the alkali-activated cement (AAC) system: A state-of-the-art review
Wang, W., & Noguchi, T. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119105 · Cited by 124
Zhang, D., Wang, D., Liu, Z., & Xie, F.-Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.205 · Cited by 123
Effect of nano-SiO2 on the efflorescence of an alkali-activated metakaolin mortar
Sun, K., Peng, X., Wang, S., Zeng, L., Ran, P., & Ji, G. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118952 · Cited by 123
Mahmoodi, O. U. R., Siad, H., Lachemi, M., et al. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122285 · Cited by 123
Risk of early age cracking in geopolymer concrete due to restrained shrinkage
Khan, I., Xu, T., Castel, A., Gilbert, R. I., & Babaee, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116840 · Cited by 122
Kastiukas, G., Ruan, S., Liang, S., & Zhou, X. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120290 · Cited by 122
Zhang, B., Guo, H., Yuan, P., Deng, L., Zhong, X., Li, Y., Wang, Q., & Liu, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103601 · Cited by 122
Alonso, M. M., Gascó, C., Martín-Morales, M., Suarez-Navarro, J. A., Zamorano, M., & Puertas, F. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103384 · Cited by 121
Using calcium carbide residue as an alkaline activator for glass powder–clay geopolymer
Bilondi, M. P., Toufigh, M. M., & Toufigh, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.190 · Cited by 118
Liang, G., Zhu, H., Zhang, Z., Wu, Q., & Du, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.111 · Cited by 118
Velandia, D. F., Lynsdale, C. J., Provis, J. L., Ramírez, F., & Gomez, A. C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.076 · Cited by 116
Effects of curing environment on strength and microstructure of alkali-activated fly ash-slag binder
Samantasinghar, S., & Singh, S. P. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117481 · Cited by 114
Rickard, W. D. A., Kealley, C. S., & van Riessen, A. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13370 · Cited by 112
Mehta, A., Siddique, R., Singh, B. P., Aggoun, S., Łagód, G., & Barnat-Hunek, D. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.066 · Cited by 112
Zhao, S., Xia, M., Yu, L., Huang, X. B., Jiao, B., & Li, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120969 · Cited by 112
Nuaklong, P., Wongsa, A., Sata, V., Boonserm, K., Sanjayan, J., & Chindaprasirt, P. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02513 · Cited by 110
Zhang, Y., He, P. Y., Zhang, Y. X., & Chen, H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.171 · Cited by 109
Nath, S. K. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121673 · Cited by 109
Processing and uses of fly ash addressing radioactivity (critical review)
Temuujin, J., Surenjav, E., Ruescher, C. H., & Vahlbruch, J. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.10.112 · Cited by 108
Ambient-cured geopolymer concrete with single alkali activator
Zannerni, G. M., Fattah, K. P., & Al-Tamimi, A. K. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00131 · Cited by 108
Chen, Y., Zhou, X., Wan, S., Zheng, R., Tong, J., Hou, H., & Wang, T. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.292 · Cited by 106
Lemougna, P. N., Nzeukou, A. N., Aziwo, B. T., Tchamba, A. B., Wang, K.-T., Melo, U. C., & Cui, X. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122077 · Cited by 106
Nikolov, A., Nugteren, H. W., & Rostovsky, I. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118257 · Cited by 106
Zhang, M., Deskins, N. A., Zhang, G., Cygan, R. T., & Tao, M. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00697 · Cited by 105
Properties of an aged geopolymer synthesized from calcined ore-dressing tailing of bauxite and slag
Ye, J., Zhang, W., & Shi, D. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.017 · Cited by 104
Maldonado-Alameda, À., Giró-Paloma, J., Svobodova‐Sedlackova, A., Formosa, J., & Chimenos, J. M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118443 · Cited by 104
Darmayanti, L., Kadja, G. T. M., Notodarmojo, S., Damanhuri, E., & Mukti, R. R. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.05.086 · Cited by 103
Guo, X., & Yang, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116965 · Cited by 99
Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin
Kaur, M., Singh, J., & Kaur, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.157 · Cited by 98
Ahmad, M. R., Chen, B., Haque, M. A., & Oderji, S. Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119916 · Cited by 95
Novel porous fly ash-containing geopolymers for pH buffering applications
Novais, R. M., Buruberri, L. H., Seabra, M. P. D. S., Bajāre, D., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.114 · Cited by 94
Pasupathy, K., Berndt, M., Sanjayan, J., Rajeev, P., & Cheema, D. S. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002165 · Cited by 87
Effect of nano-silica on the efflorescence of waste based alkali-activated inorganic binder
Wang, J., Zhou, T., Xu, D., Zhou, Z., Du, P., Xie, N., Cheng, X. Y., & Liu, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.006 · Cited by 87
Guo, X., Shi, H., & Wei, X. Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.007 · Cited by 86
Composition and properties of phosphoric acid-based geopolymers
Celerier, H., Jouin, J., Mathivet, V., Tessier-Doyen, N., & Rossignol, S. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.04.044 · Cited by 86
Enhancing Cd(II) sorption by red mud with heat treatment: Performance and mechanisms of sorption
Yang, T., Wang, Y., Sheng, L., He, C., Sun, W., & He, Q. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109866 · Cited by 86
Synthesis of fly ash-based self-supported zeolites foam geopolymer via saturated steam treatment
Han, L. G., Wang, J., Liu, Z., Zhang, Y., Jin, Y., Li, J., & Wang, D. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122468 · Cited by 86
Geopolymer synthesis by the alkali-activation of blastfurnace steel slag and its fire-resistance
Abdel-Ghani, N. T., El-Sayed, H. A., & AbdelMoied, S. (2016) · HBRC Journal · doi:10.1016/j.hbrcj.2016.06.001 · Cited by 81
Porous geopolymer spheres as novel pH buffering materials
Novais, R. M., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.008 · Cited by 81
Durability study of AAMs: Sulfate attack resistance
Aliques-Granero, J., Tognonvi, M. T., & Tagnit‐Hamou, A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117100 · Cited by 81
Wang, K.-T., Tang, Q., Cui, X.-M., He, Y., & Liu, L.-P. (2016) · Scientific Reports · doi:10.1038/srep29659 · Cited by 79
Galiano, Y. L., Leiva, C., Arenas, C., & Fernández‐Pereira, C. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.07.069 · Cited by 79
Leong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.046 · Cited by 77
Kovářík, T., Rieger, D., Kadlec, J., Křenek, T., Kullová, L., Pola, M., Bělský, P., Franče, P., & Říha, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.134 · Cited by 77
Facile preparation of slag or fly ash geopolymer composite coatings with flame resistance
Wang, Y., & Zhao, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.097 · Cited by 76
Intermittent curing of fly ash geopolymer mortar
Helmy, A. I. I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.007 · Cited by 75
Novais, R. M., Gameiro, T., Carvalheiras, J., Seabra, M. P. D. S., Tarelho, L. A. C., Labrincha, J. A., & Capela, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.033 · Cited by 74
Jiang, W., Li, X., Lv, Y., Jiang, D., Liu, Z., & He, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117683 · Cited by 74
Mathew, G., & Issac, B. M. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101486 · Cited by 74
Qin, S., Xu, Z., Yao, Z., Chen, X., Jiang, Z., Peng, X., An, R., Yu, L., Xin, J., & Li, H. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.127228 · Cited by 73
Feasibility of manufacturing geopolymer bricks using circulating fluidized bed combustion bottom ash
Chen, C., Li, Q., Shen, L., et al. (2011) · Environmental Technology · doi:10.1080/09593330.2011.626797 · Cited by 69
Development of Fly Ash- and Slag-Based Geopolymer Concrete with Calcium Carbonate or Microsilica
Elchalakani, M., Dong, M., Karrech, A., Li, G., Ali, M. S. M., Xie, T., & Yang, B. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002527 · Cited by 68
Influence of Microstructure of Geopolymer Concrete on Its Mechanical Properties—A Review
Hassan, A., Arif, M., & Shariq, M. (2019) · Lecture notes in civil engineering · doi:10.1007/978-981-13-7480-7_10 · Cited by 66
Ahmad Zailani, W. W., Bouaissi, A., Abdullah, M. M. A. B., Abd Razak, R., Yoriya, S., Mohd Salleh, M. A. A., Rozainy M. A. Z., M. R., & Fansuri, H. (2020) · Applied Sciences · doi:10.3390/app10093321 · Cited by 66
A porous gradient geopolymer-based tube membrane with high PM removal rate for air pollution
Wang, J.-T., Ge, Y., He, Y., Xu, M., & Cui, X. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.268 · Cited by 65
On the use of blast-furnace slag in sprayed concrete applications
Salvador, R. P., Rambo, D. A. S., Bueno, R. M., Silva, K. T., & de Figueiredo, A. D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.132 · Cited by 65
Eidgahee, D. R., Rafiean, A. H., & Haddad, A. (2019) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-019-00263-1 · Cited by 64
Baenla, J., Mbah, J. B. B., Ndjock, I. B. D. L., & Elimbi, A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116689 · Cited by 58
Strength and Density of Geopolymer Mortar Cured at Ambient Temperature for Use as Repair Material
Zailani, W. W. A., Abdullah, M. M. A. B., Razak, R. A., Zainol, M. R. R. M. A., & Tahir, M. F. M. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/133/1/012042 · Cited by 57
Būmanis, Ģ., Novais, R. M., Carvalheiras, J., Bajāre, D., & Labrincha, J. A. (2019) · Applied Clay Science · doi:10.1016/j.clay.2019.105147 · Cited by 56
Ambient- and oven-cured geopolymer concretes under active confinement
Gholampour, A., Ozbakkaloglu, T., & Ng, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116722 · Cited by 54
Mechanical and Durability Performance of Novel Self-activating Geopolymer Mortars
Cheah, C. B., Ken, P. W., & Ramli, M. B. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.01.374 · Cited by 53
Pyrolysed cork-geopolymer composites: A novel and sustainable EMI shielding building material
Novais, R. M., Saeli, M., Caetano, A. P. F., Seabra, M. P. D. S., Labrincha, J. A., Surendran, K. P., & Pullar, R. C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116930 · Cited by 53
Zhang, J., Ge, Y., Li, Z., & Wang, Y. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109969 · Cited by 53
Dry powder alkali-activated slag cements
Kovtun, M., Kearsley, E. P., & Shekhovtsova, J. (2015) · Advances in Cement Research · doi:10.1680/jadcr.14.00078 · Cited by 51
Pervaporation membrane based on laterite zeolite-geopolymer for ethanol-water separation
Subaer, S., Haris, A., Irhamsyah, A., Permatasari, A. D., Desa, S. S., Irfanita, R., & Wahyuni, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119413 · Cited by 48
Alkali-activated binary mortar based on natural volcanic pozzolan for repair applications
Salazar, R. A. R., Jesus, C. M. G., de Gutiérrez, R. M., & Pacheco-Torgal, F. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100785 · Cited by 47
Hong, S., & Kim, H. (2019) · Scientific Reports · doi:10.1038/s41598-019-52160-2 · Cited by 47
Study of alkali activated slag as alternative pavement binder
Sun, Z., Lin, X., Liu, P., Wang, D., Vollpracht, A., & Oeser, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.154 · Cited by 46
Synthesis of porous alkali-activated materials for high-acidic wastewater treatment
Chindaprasirt, P., & Rattanasak, U. (2019) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.101118 · Cited by 44
Liu, C., Yao, X., & Zhang, W. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117091 · Cited by 40
Effect of Variability of Fly Ash Obtained from the Same Source on the Characteristics of Geopolymer
Antoni, A., Satria, J., Sugiarto, A., & Hardjito, D. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701026 · Cited by 35
Xia, M., Nematollahi, B., & Sanjayan, J. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_23 · Cited by 35
Effect of zeolite on waste based alkali-activated inorganic binder efflorescence
Wang, J., Fang-shu, L., Zhou, Z., Du, P., Xu, D., Xie, N., Cheng, X. Y., & Liu, Y. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.065 · Cited by 34
Nanomaterials Applied in Modifications of Geopolymer Composites: a Review
Xie, T., & Fang, C. (2019) · Australian Journal of Civil Engineering · doi:10.1080/14488353.2019.1614353 · Cited by 33
Pelisser, F., Bernardin, A. M., Michél, M. D., & da Luz, C. A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124293 · Cited by 31
Gökçe, H. S., Tuyan, M., Ramyar, K., & Nehdi, M. L. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0003017 · Cited by 30
Porous geopolymer as a possible template for a phase change material
Gasca-Tirado, J. R., Manzano-Ramírez, A., Velazquez-Castillo, R. R., Gómez-Luna, B. E., Nava, R., López-Romero, J. M., Apátiga-Castro, L. M., & Rivera-Muñoz, E. M. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.121785 · Cited by 29
The Properties of Nano TiO2-Geopolymer Composite as a Material for Functional Surface Application
Syamsidar, D., Nurfadilla, & Subaer, S. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701013 · Cited by 28
Kuo, W., Liu, M.-Y., & Juang, C.-U. (2019) · Materials · doi:10.3390/ma12101697 · Cited by 27
Helmboldt, O., Hudson, L. K., Misra, C., Wefers, K., Heck, W., Stark, H., Danner, M., & Rösch, N. (2007) · Ullmann's Encyclopedia of Industrial Chemistry · doi:10.1002/14356007.a01_527.pub2 · Cited by 26
Oleiwi, S. M., Alğın, Z., Nassani, D. E., & Mermerdaş, K. (2018) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-018-3170-x · Cited by 24
Vandevenne, N., Iacobescu, R. I., Carleer, R., Samyn, P., D’Haen, J., Pontikes, Y., Schreurs, S., & Schroeyers, W. (2018) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2018.08.045 · Cited by 23
Role of geopolymer as a cure activator in sulfur vulcanization of epoxidized natural rubber
Yangthong, H., Pichaiyut, S., Wisunthorn, S., Kummerlöwe, C., Vennemann, N., & Nakason, C. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48624 · Cited by 22
Performance of slag based Shirasu geopolymer cured under ambient condition
Katpady, D. N., Takewaka, K., Yamaguchi, T., & Akira, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117210 · Cited by 20
Photocatalytic Activity of ZnO-doped Geopolymer Paste
Zailan, S. N., Mahmed, N., & Abdullah, M. M. A. B. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/864/1/012038 · Cited by 6
Metadata
- Authors
- Cong, P., & Cheng, Y.
- Venue
- Journal of Traffic and Transportation Engineering (English Edition)
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 8
- Issue
- 3
- Pages
- 283-314
- ISSN
- 2095-7564 (ISSN-L)
- OpenAlex
- W3165192547
- Cited by
- 481
- References
- 183
- FWCI
- 40.15
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.