The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Optimisation using central composite design (CCD) and the desirability function for sorption of methylene blue from aqueous solution onto Lemna major
Open accessAbstract
Water pollution due to contamination of dye containing effluents is a great threat to water body. A study on the biosorption of methylene blue (MB) onto low-cost Lemna major biomass was conducted and the process parameters were optimized by response surface methodology (RSM). A two-level, four-factor central composite design (CCD) has been employed to determine the effect of various process parameters namely initial concentration (600–1000 mg L−1), bioadsorbent dose (0.20–1.50 g/100 mL), pH (5–12) and stirring rate (250–800 rpm) on MB uptake from aqueous solution. By using this design a total of 30 biosorption experimental data were fitted. The regression analysis showed good fit of the experimental data to the second-order polynomial model with coefficient of determination (R2) value of 0.9978 and model F-value of 953.48. The optimum conditions of initial concentration (1000 mg L−1), adsorbent dose (0.2 g), pH (5) and stirring rate (251.51 rpm) were recorded from desirability function. The adsorption isotherm data were best described by both Freundlich and Langmuir models with a maximum adsorption capacity of 488 mg MB g−1 L. major biomass at 30 °C which is higher than that available with adsorbents used by past researchers. Finally the pseudo second order kinetic model described the MB biosorption process with a good fitting (R2 = 0.999). The adsorbent was characterised by scanning electron micrograph (SEM) and Fourier transform infrared spectroscopy (FTIR).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comparative study of dye removal using fly ash treated by different methods
Wang, S., Boyjoo, Y., & Choueib, A. (2005) · Chemosphere · doi:10.1016/j.chemosphere.2005.01.091 · Cited by 325
Cited by
Chandra, S., & Bhattacharya, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.079 · Cited by 271
S, R., Lata, S., & P, B. (2018) · Surfaces and Interfaces · doi:10.1016/j.surfin.2017.09.011 · Cited by 260
Bouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.12.028 · Cited by 124
Metadata
- Authors
- Sadhukhan, B., Mondal, N. K., & Chattoraj, S.
- Venue
- Karbala International Journal of Modern Science
- Publisher
- University of Kerbala - KIJOMS
- Published
- 2016-09
- Volume
- 2
- Issue
- 3
- Pages
- 145-155
- ISSN
- 2405-609X (ISSN-L)
- OpenAlex
- W2462828516
- Cited by
- 213
- References
- 1
- FWCI
- 6.36
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimisation using central composite design (CCD) and the desirability function for sorption of methylene blue from aqueous solution onto Lemna major. https://app.cochat.ai/papers/10.1016/j.kijoms.2016.03.005
- The paper
- Sadhukhan, B., Mondal, N. K., & Chattoraj, S. (2016). Optimisation using central composite design (CCD) and the desirability function for sorption of methylene blue from aqueous solution onto Lemna major. Karbala International Journal of Modern Science. https://doi.org/10.1016/j.kijoms.2016.03.005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.