The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting
Abstract
Abstract In this study we have assessed the microstructure details of 316L stainless steel produced by the additive-manufacturing selective-laser-melting technique under industrial conditions and correlated them with the mechanical properties. The employed micro- and nano-scale imaging electron microscopy techniques revealed the formation of a rigid hierarchical microstructure, which was driven by the rapidly changing solidification rates. The latter also affected the alloying atoms' distribution in the melt-pool boundary area as well as in the dislocation-dense regions. The melt-pool boundaries in themselves did not produce structural irregularities, but were shown to have a slightly different chemical composition. The arrangement of the complex dislocation cells that developed in the whole material volume led to an increase in the yield strength. The calculated twenty-times-higher dislocation density compared to that of the forged material was linked to a very low strength hardening. The similarity of the calculated yield strength, which came from the experimentally determined structure parameters, with the experimental value additionally supported the structure/mechanical properties correlation, derived in this work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
Voisin, T., Forien, J.-B., Perron, A., Aubry, S., Bertin, N., Samanta, A., Baker, A., & Wang, Y. M. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.11.018 · Cited by 623
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Metadata
- Authors
- Godec, M., Zaefferer, S., Podgornik, B., Šinko, M., & Tchernychova, E.
- Venue
- Materials Characterization
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 160
- Pages
- 110074
- ISSN
- 1044-5803 (ISSN-L)
- OpenAlex
- W2995855672
- Cited by
- 252
- References
- 2
- FWCI
- 12.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting. https://app.cochat.ai/papers/10.1016/j.matchar.2019.110074
- The paper
- Godec, M., Zaefferer, S., Podgornik, B., Šinko, M., & Tchernychova, E. (2020). Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting. Materials Characterization. https://doi.org/10.1016/j.matchar.2019.110074
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.