The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Optimized preparation of activated carbon from coconut shell and municipal sludge
Abstract
A low-cost and well-developed type of activated carbon (AC) was synthesized from coconut shell and municipal sludge via two-stage co-pyrolysis. It not only reused disposed sewage sludge and agricultural waste, but also turned waste into a porous adsorbent. The optimization of operating variables during the synthetic process was carried out using a single factor experiment. Simultaneously, the preparation conditions and interactions between factors were further optimized with the Box-Behnken design (BBD) of response surface methodology (RSM). The optimal conditions were determined as: an activation temperature of 800 °C, an activation time of 60 min, an activator concentration of 2.5 mol/L, a 50% addition of coconut shell, a carbonization temperature of 500 °C, a carbonization time of 45 min, 2.5 mol/L KOH, an impregnation ratio of 1.5:1 and a time of 20 h, under which a iodine value of 698.37 mg/g was achieved. Activation temperature was found to be the most significant factor affecting the iodine value of AC, and there was an interaction between these some factors (activation temperature, activation time and activator concentration). Some characterizations (FT-IR, SEM, Boehm's titration and textural test) were also used to measure the physicochemical properties of optimized activated carbon (AC0). The FT-IR results indicated that abundant oxygen-containing functional groups (C–O, O–H and C O) were observed on the surface of AC0 with irregular and well-developed porosity. These functional groups may have stemmed from carboxylic groups (0.99 mmol/g), lactonic groups (0.45 mmol/g) and phenolic groups (0.79 mmol/g) after co-pyrolysis of sludge and coconut shell. The total surface area (680.34 m2/g) and volume (0.73 cm3/g) of AC0 were obviously higher than those of activated carbon from municipal sludge (MSAC). By comparing the adsorption performances, the iodine value of AC0 was found to be superior to that of other carbon adsorbents. These consequences demonstrated that the physicochemical properties of AC employed in the field of adsorbents were improved due to the addition of biomass. The waste disposal method satisfied the demand of the current market and environmental requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar production by sewage sludge pyrolysis
Agrafioti, E., Bouras, G., Kalderis, D., & Diamadopoulos, E. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.02.010 · Cited by 650
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Mohamed, B. A., Hamid, H., Montoya-Bautista, C. V., & Li, L. Y. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136095 · Cited by 40
Self-citation
Metadata
- Authors
- Liang, Q., Liu, Y., Chen, M., Ma, L., Yang, B., Li, L., & Liu, Q.
- Venue
- Materials Chemistry and Physics
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 241
- Pages
- 122327
- ISSN
- 0254-0584 (ISSN-L)
- OpenAlex
- W2980959230
- Cited by
- 178
- References
- 1
- FWCI
- 7.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimized preparation of activated carbon from coconut shell and municipal sludge. https://app.cochat.ai/papers/10.1016/j.matchemphys.2019.122327
- The paper
- Liang, Q., Liu, Y., Chen, M., Ma, L., Yang, B., Li, L., & Liu, Q. (2020). Optimized preparation of activated carbon from coconut shell and municipal sludge. Materials Chemistry and Physics. https://doi.org/10.1016/j.matchemphys.2019.122327
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.