The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Low density and high strength nanofibrillated cellulose aerogel for thermal insulation application
Abstract
Abstract Low density and high strength nanofibrillated cellulose aerogel based on pinewood were prepared by the freeze-drying method. The study was focused to reduce the thermal conductivity of the prepared aerogel along with the improvement in mechanical strength. Synthesized nanofibrillated cellulose aerogel had demonstrated high porosity (99.4%) and ultra low density (8.1 kg/m3). Morphological analysis of aerogel by FESEM (Field emission scanning electron microscope) confirmed nano-dimensional diameter of cellulosic fibres and pore size distribution of aerogel in the range of 2–50 nm. X-ray microtomography confirmed the three-dimensional, monolithic and porous structure. The mechanical and thermal transport properties of aerogel have been tailored via controlling the concentration of nanofibrillated cellulose in the hydrogel. The synthesized aerogel act as a thermal insulator with the thermal conductivity of 25.5 mW/m K at 1.00 wt% of aerogel, which is near to the thermal conductivity of air in ambient condition. Cyclic compression strength of aerogel was investigated at 25%, 50% and 75% strain for 50 cycles. 1.00 wt% aerogel was 70% recoverable at 25% strain but reflecting strain-hardening behaviour at 75% strain. 1.00–1.50 wt% aerogels have shown ductile, flexible and compressible behaviour. Nanofibrillated cellulose aerogel would be a candidate in practical applications such as heat insulator, kinetic energy absorber and energy efficiency building.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Abràmoff, M. D., Magalhães, P. J., & Ram, S. J. (2004) · Utrecht University Repository (Utrecht University) · Cited by 15,108
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Coherent Expanded Aerogels and Jellies
KISTLER, S. S. (1931) · Nature · doi:10.1038/127741a0 · Cited by 2,103
Cellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Gustafsson, S. E. (1991) · Review of Scientific Instruments · doi:10.1063/1.1142087 · Cited by 1,480
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Kistler, S. S. (1932) · The Journal of Physical Chemistry · doi:10.1021/j150331a003 · Cited by 919
Cited by
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Cascade utilization of lignocellulosic biomass to high-value products
Liu, Y., Nie, Y., Lu, X., Zhang, X., He, H., Pan, F., Zhou, L., Liu, X., Ji, X., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c9gc00473d · Cited by 405
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
Yi, T., Zhao, H., Mo, Q., Pan, D., Liu, Y., Huang, L., Xu, H., Hu, B., & Song, H. (2020) · Materials · doi:10.3390/ma13225062 · Cited by 287
Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review
Ahankari, S., Paliwal, P., Subhedar, A., & Kargarzadeh, H. (2021) · ACS Nano · doi:10.1021/acsnano.0c09678 · Cited by 281
A Review on Plant Cellulose Nanofibre-Based Aerogels for Biomedical Applications
Abdul Khalil, H. P. S., Adnan, A. S., Yahya, E. B., Olaiya, N. G., Safrida, S., Hossain, M. S., Balakrishnan, V., Gopakumar, D. A., Abdullah, C. K., Oyekanmi, A. A., et al. (2020) · Polymers · doi:10.3390/polym12081759 · Cited by 273
Metadata
- Authors
- Gupta, P., Singh, B., Agrawal, A. K., & Maji, P. K.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 158
- Pages
- 224-236
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2886509591
- Cited by
- 262
- References
- 51
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.