The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Low density and high strength nanofibrillated cellulose aerogel for thermal insulation application
Abstract
Abstract Low density and high strength nanofibrillated cellulose aerogel based on pinewood were prepared by the freeze-drying method. The study was focused to reduce the thermal conductivity of the prepared aerogel along with the improvement in mechanical strength. Synthesized nanofibrillated cellulose aerogel had demonstrated high porosity (99.4%) and ultra low density (8.1 kg/m3). Morphological analysis of aerogel by FESEM (Field emission scanning electron microscope) confirmed nano-dimensional diameter of cellulosic fibres and pore size distribution of aerogel in the range of 2–50 nm. X-ray microtomography confirmed the three-dimensional, monolithic and porous structure. The mechanical and thermal transport properties of aerogel have been tailored via controlling the concentration of nanofibrillated cellulose in the hydrogel. The synthesized aerogel act as a thermal insulator with the thermal conductivity of 25.5 mW/m K at 1.00 wt% of aerogel, which is near to the thermal conductivity of air in ambient condition. Cyclic compression strength of aerogel was investigated at 25%, 50% and 75% strain for 50 cycles. 1.00 wt% aerogel was 70% recoverable at 25% strain but reflecting strain-hardening behaviour at 75% strain. 1.00–1.50 wt% aerogels have shown ductile, flexible and compressible behaviour. Nanofibrillated cellulose aerogel would be a candidate in practical applications such as heat insulator, kinetic energy absorber and energy efficiency building.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Abràmoff, M. D., Magalhães, P. J., & Ram, S. J. (2004) · Utrecht University Repository (Utrecht University) · Cited by 15,112
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Coherent Expanded Aerogels and Jellies
KISTLER, S. S. (1931) · Nature · doi:10.1038/127741a0 · Cited by 2,103
Cellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Gustafsson, S. E. (1991) · Review of Scientific Instruments · doi:10.1063/1.1142087 · Cited by 1,480
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Kistler, S. S. (1932) · The Journal of Physical Chemistry · doi:10.1021/j150331a003 · Cited by 919
Nanocellulose: a promising nanomaterial for advanced electrochemical energy storage
Chen, W., Yu, H., Lee, S.-Y., Wei, T., Li, J., & Fan, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00790f · Cited by 766
Extraction of nanocellulose fibrils from lignocellulosic fibres: A novel approach
Abraham, E., Deepa, B., Pothan, L. A., Jacob, M., Thomas, S., Cvelbar, U., & Anandjiwala, R. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.034 · Cited by 751
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 568
Kobayashi, Y., Saito, T., & Isogai, A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405123 · Cited by 566
Drishti: a volume exploration and presentation tool
Limaye, A. (2012) · SPIE Proceedings · doi:10.1117/12.935640 · Cited by 526
Sehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A. (2010) · Soft Matter · doi:10.1039/b927505c · Cited by 462
Zheng, Q., Cai, Z., & Gong, S. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14642a · Cited by 393
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.033 · Cited by 362
Rheology of Nanocrystalline Cellulose Aqueous Suspensions
Shafiei-Sabet, S., Hamad, W. Y., & Hatzikiriakos, S. G. (2012) · Langmuir · doi:10.1021/la303380v · Cited by 361
Aerocellulose: New Highly Porous Cellulose Prepared from Cellulose−NaOH Aqueous Solutions
Gavillon, R., & Budtova, T. (2008) · Biomacromolecules · doi:10.1021/bm700972k · Cited by 355
Stelte, W., & Sanadi, A. R. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9011672 · Cited by 331
Zhao, S., Zhang, Z., Sèbe, G., Wu, R., Rivera Virtudazo, R. V., Tingaut, P., & Koebel, M. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404368 · Cited by 307
Photoswitchable Superabsorbency Based on Nanocellulose Aerogels
Kettunen, M., Silvennoinen, R. J., Houbenov, N., Nykänen, A., Ruokolainen, J., Sainio, J., Pore, V., Kemell, M., Ankerfors, M., Lindström, T., et al. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001431 · Cited by 259
Ultralight and highly flexible aerogels with long cellulose I nanofibers
Chen, W., Yu, H., Li, Q., Liu, Y., & Li, J. (2011) · Soft Matter · doi:10.1039/c1sm06179h · Cited by 238
Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels
Mulyadi, A., Zhang, Z., & Deng, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10985 · Cited by 225
Spray freeze-dried nanofibrillated cellulose aerogels with thermal superinsulating properties
Jiménez-Saelices, C., Seantier, B., Cathala, B., & Grohens, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.068 · Cited by 219
Aerocellulose: Aerogels and Aerogel‐like Materials made from Cellulose
Innerlohinger, J., Weber, H. K., & Kraft, G. (2006) · Macromolecular Symposia · doi:10.1002/masy.200651212 · Cited by 209
Silicacellulose hybrid aerogels for thermal and acoustic insulation applications
Feng, J., Le, D., Nguyen, S. T., Tan Chin Nien, V., Jewell, D., & Duong, H. M. (2016) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2016.06.052 · Cited by 208
Chitosan Aerogels: Transparent, Flexible Thermal Insulators
Takeshita, S., & Yoda, S. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03610 · Cited by 206
Xiong, R., Lu, C., Wang, Y., Zhou, Z., & Zhang, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13314a · Cited by 203
Guo, L., Chen, Z., Lyu, S., Fu, F., & Wang, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.084 · Cited by 194
Aerogel insulation systems for space launch applications
Fesmire, J. E. (2006) · Cryogenics · doi:10.1016/j.cryogenics.2005.11.007 · Cited by 186
Wu, T., Dong, J., Gan, F., Fang, Y., Zhao, X., & Zhang, Q. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.01.132 · Cited by 184
Martoïa, F., Cochereau, T., Dumont, P. J. J., Orgéas, L., Terrien, M., & Belgacem, M. N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.088 · Cited by 166
Nanocellulose-tannin films: From trees to sustainable active packaging
Missio, A. L., Mattos, B. D., Ferreira, D. D. F., Magalhães, W. L. E., Bertuol, D. A., Gatto, D. A., Petutschnigg, A. J., & Tondi, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.205 · Cited by 165
Shi, J., Lu, L., Guo, W., Zhang, J., & Cao, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.082 · Cited by 161
Thermal conductivity of a clay-based aerogel
Hostler, S. R., Abramson, A. R., Gawryla, M. D., Bandi, S., & Schiraldi, D. A. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.07.002 · Cited by 140
The Relation between Heat Conductivity and Structure in Silica Aerogel
Kistler, S. S. (1935) · The Journal of Physical Chemistry · doi:10.1021/j150361a006 · Cited by 124
Novak, B. M., Auerbach, D., & Verrier, C. (1994) · Chemistry of Materials · doi:10.1021/cm00039a006 · Cited by 123
Yang, L., Mukhopadhyay, A., Jiao, Y., Yong, Q., Chen, L., Xing, Y., Hamel, J., & Zhu, H. (2017) · Nanoscale · doi:10.1039/c7nr02243c · Cited by 121
Sakai, K., Kobayashi, Y., Saito, T., & Isogai, A. (2016) · Scientific Reports · doi:10.1038/srep20434 · Cited by 119
Liu, A., Medina, L., & Berglund, L. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15561 · Cited by 110
Zhang, R., Wan, W., Qiu, L., Wang, Y., & Zhou, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.05.044 · Cited by 91
Zhang, X., Wang, Y., Zhao, J., Xiao, M., Zhang, W., & Lu, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00814 · Cited by 78
Yadav, C., Saini, A., & Maji, P. K. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.049 · Cited by 66
Self-citationOils sorption on hydrophobic nanocellulose aerogel obtained from the wood furniture industry waste
de Oliveira, P. B., Godinho, M., & Zattera, A. J. (2018) · Cellulose · doi:10.1007/s10570-018-1781-8 · Cited by 52
Crosslinked polyurea-co-polyurethane aerogels with hierarchical structures and low stiffness
Shinko, A., Jana, S. C., & Meador, M. A. B. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.02.020 · Cited by 34
Yadav, C., Saini, A., & Maji, P. K. (2017) · Cellulose · doi:10.1007/s10570-017-1567-4 · Cited by 26
Self-citation
Cited by
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Cascade utilization of lignocellulosic biomass to high-value products
Liu, Y., Nie, Y., Lu, X., Zhang, X., He, H., Pan, F., Zhou, L., Liu, X., Ji, X., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c9gc00473d · Cited by 405
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
Metadata
- Authors
- Gupta, P., Singh, B., Agrawal, A. K., & Maji, P. K.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 158
- Pages
- 224-236
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2886509591
- Cited by
- 262
- References
- 51
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.