The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
Open accessAbstract
Gyroid is a member of the triply periodic minimal surfaces (TPMS) family. In this paper, the mechanical properties of Gyroid-structures are investigated both experimentally and computationally. 3D printing is used to fabricate polymeric Gyroid-structure specimens made of PA 2200 at different relative densities. In the finite element analysis, the Arruda-Boyce finite-deformation elasto-viscoplastic model is employed. To perform the finite element analysis, the properties of the 3D printed material are determined by a series of tension and compression tests. The finite element results of the Gyroid-structure agree very well with the experimental data. Also, the uniaxial modulus, compressive strength, and energy absorption of the Gyroid-structures are compared with those of the IWP-, Neovius-, and Primitive-structures from a previous study. The comparison shows that Gyroid-structures have relatively good mechanical properties and compete well with the other TPMS cellular structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Valdevit, L., Jacobsen, A. J., Greer, J. R., & Carter, W. B. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04599.x · Cited by 142
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Self-citationState-of-the-art in heat exchanger additive manufacturing
Kaur, I., & Singh, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121600 · Cited by 319
Metadata
- Authors
- Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 165
- Pages
- 107597
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2909203648
- Cited by
- 491
- References
- 3
- FWCI
- 24.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study. https://app.cochat.ai/papers/10.1016/j.matdes.2019.107597
- The paper
- Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019). Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study. Materials & Design. https://doi.org/10.1016/j.matdes.2019.107597
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
