The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
Open accessAbstract
Gyroid is a member of the triply periodic minimal surfaces (TPMS) family. In this paper, the mechanical properties of Gyroid-structures are investigated both experimentally and computationally. 3D printing is used to fabricate polymeric Gyroid-structure specimens made of PA 2200 at different relative densities. In the finite element analysis, the Arruda-Boyce finite-deformation elasto-viscoplastic model is employed. To perform the finite element analysis, the properties of the 3D printed material are determined by a series of tension and compression tests. The finite element results of the Gyroid-structure agree very well with the experimental data. Also, the uniaxial modulus, compressive strength, and energy absorption of the Gyroid-structures are compared with those of the IWP-, Neovius-, and Primitive-structures from a previous study. The comparison shows that Gyroid-structures have relatively good mechanical properties and compete well with the other TPMS cellular structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Deformation and Fracture Mechanics of Engineering Materials
Hertzberg, R. W., & Hauser, F. E. (1977) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443416 · Cited by 3,668
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Self-citationZhang, L., Feih, S., Daynes, S., Chang, S., Wang, M. Y., Wei, J., & Lu, W. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.007 · Cited by 780
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Evolution of plastic anisotropy in amorphous polymers during finite straining
Arruda, E. M., & Boyce, M. C. (1993) · International Journal of Plasticity · doi:10.1016/0749-6419(93)90034-n · Cited by 509
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
Self-citationCurrent trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Gyroid cuticular structures in butterfly wing scales: biological photonic crystals
Michielsen, K., & Stavenga, D. G. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.1065 · Cited by 424
Materials: engineering, science, processing and design
(2007) · Materials Today · doi:10.1016/s1369-7021(07)70084-6 · Cited by 406
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., & Jasiuk, I. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.01.004 · Cited by 317
Self-citationLi, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Discovery of a diamond-based photonic crystal structure in beetle scales
Galusha, J. W., Richey, L. R., Gardner, J. S., Cha, J. N., & Bartl, M. H. (2008) · Physical Review E · doi:10.1103/physreve.77.050904 · Cited by 268
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249
Self-citation(2015) · Mechanics of Solid Polymers · doi:10.1016/b978-0-323-31150-2.09990-8 · Cited by 237
Energy storage during inelastic deformation of glassy polymers
Hasan, O. A., & Boyce, M. C. (1993) · Polymer · doi:10.1016/0032-3861(93)90252-6 · Cited by 229
Materials: engineering, science, processing and design
(2010) · Materials Today · doi:10.1016/s1369-7021(10)70042-0 · Cited by 223
Fluid permeabilities of triply periodic minimal surfaces
Jung, Y., & Torquato, S. (2005) · Physical Review E · doi:10.1103/physreve.72.056319 · Cited by 198
Yoo, D.-J. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0516-5 · Cited by 175
Advanced Micro‐Lattice Materials
Xiong, J., Mines, R., Ghosh, R., Vaziri, A., Ma, L., Ohrndorf, A., Christ, H., & Wu, L. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400471 · Cited by 174
An Overview on Additive Manufacturing of Polymers
Jasiuk, I., Abueidda, D. W., Kozuch, C., Pang, S., Su, F. Y., & McKittrick, J. (2018) · JOM · doi:10.1007/s11837-017-2730-y · Cited by 166
Self-citationMinimal surfaces and multifunctionality
Torquato, S., & Donev, A. (2004) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2003.1269 · Cited by 164
The chiral structure of porous chitin within the wing-scales of Callophrys rubi
Schröder‐Turk, G. E., Wickham, S. F. J., Averdunk, H., et al. (2011) · Journal of Structural Biology · doi:10.1016/j.jsb.2011.01.004 · Cited by 159
Valdevit, L., Jacobsen, A. J., Greer, J. R., & Carter, W. B. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04599.x · Cited by 142
Dalaq, A. S., Abueidda, D., Al‐Rub, R. K. A., & Jasiuk, I. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.01.011 · Cited by 136
Self-citationMechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Anisotropy, homogeneity and ageing in an SLS polymer
Cooke, W., Tomlinson, R. A., Burguete, R. L., Johns, D., & Vanard, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111138397 · Cited by 82
Restrepo, S., Ocampo, S., Ramirez, J. A., Paucar, C. G., & Garcı́a, C. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/935/1/012036 · Cited by 80
Time dependent response of architectured Neovius foams
Khan, K. A., & Al‐Rub, R. K. A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.03.017 · Cited by 57
Unusually low and density-insensitive thermal conductivity of three-dimensional gyroid graphene
Jung, G. S., Yeo, J., Tian, Z., Zhao Qin, A., & Buehler, M. J. (2017) · Nanoscale · doi:10.1039/c7nr04455k · Cited by 54
Modeling of Stiffness and Strength of Bone at Nanoscale
Abueidda, D., Sabet, F. A., & Jasiuk, I. (2017) · Journal of Biomechanical Engineering · doi:10.1115/1.4036314 · Cited by 36
Self-citationViscoelastic properties of architected foams based on the Schoen IWP triply periodic minimal surface
Khan, K. A., & Al‐Rub, R. K. A. (2018) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2018.1538470 · Cited by 28
Modeling Time and Frequency Domain Viscoelastic Behavior of Architectured Foams
Khan, K. A., & Al‐Rub, R. K. A. (2018) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001448 · Cited by 21
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Self-citationFeng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
State-of-the-art in heat exchanger additive manufacturing
Kaur, I., & Singh, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121600 · Cited by 319
Metadata
- Authors
- Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 165
- Pages
- 107597
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2909203648
- Cited by
- 491
- References
- 51
- FWCI
- 24.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.