The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
A review of experimental approaches to fracture toughness evaluation at the micro-scale
Open accessAbstract
The discipline of fracture mechanics was born almost a century ago through the pioneering work of A.A. Griffith, and saw particularly rapid growth in the second half of 20th century when it became an indispensable tool in the development of advanced transportation, civil construction, and energy systems. Forty years ago, Materials & Design published a series of papers devoted to the state-of-the-art in the field of Fracture Mechanics. The present review reflects the lasting legacy and surviving importance of this theme: it is associated with the Virtual Special Issue on nanoscale materials testing and characterisation, and focuses on the modern experimental approaches to fine scale fracture toughness evaluation, with particular emphasis on micro-cantilever bending and micro-pillar splitting. The fundamental aspects of these approaches are overviewed, and their application to a range of systems is described. Implications for further development of these methods are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate
Irwin, G. R. (1957) · Journal of Applied Mechanics · doi:10.1115/1.4011547 · Cited by 5,661
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
Fracture Toughness Determinations by Indentation
Evans, A. G., & Charles, E. A. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb10991.x · Cited by 2,356
Sample Dimensions Influence Strength and Crystal Plasticity
Uchic, M. D., Dimiduk, D. M., Florando, J. N., & Nix, W. D. (2004) · Science · doi:10.1126/science.1098993 · Cited by 2,330
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System
LAWN, B. R., EVANS, A. G., & MARSHALL, D. B. (1980) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1980.tb10768.x · Cited by 2,108
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Indentation fracture: principles and applications
Lawn, B., & Wilshaw, R. (1975) · Journal of Materials Science · doi:10.1007/bf00823224 · Cited by 1,321
Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics
Cook, R. F., & Pharr, G. M. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb05119.x · Cited by 1,071
Phase Transformations in Metals and Alloys (Revised Reprint)
Porter, D. A., Easterling, K. E., & Easterling, K. E. (2009) · CRC Press eBooks · doi:10.1201/9781439883570 · Cited by 1,060
Kiener, D., Grosinger, W., Dehm, G., & Pippan, R. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.10.015 · Cited by 497
FIB damage of Cu and possible consequences for miniaturized mechanical tests
Kiener, D., Motz, C., Rester, M., Jenko, M., & Dehm, G. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2007.01.046 · Cited by 451
Plasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
Dehm, G., Jaya, B. N., Raghavan, R., & Kirchlechner, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.06.019 · Cited by 382
Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams
Di Maio, D., & Roberts, S. G. (2005) · Journal of Materials Research · doi:10.1557/jmr.2005.0048 · Cited by 284
Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges
Sebastiani, M., Johanns, K. E., Herbert, E. G., & Pharr, G. M. (2015) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.04.003 · Cited by 243
Self-citationShim, S., Bei, H., Miller, M. K., Pharr, G. M., & George, E. P. (2009) · Acta Materialia · doi:10.1016/j.actamat.2008.09.033 · Cited by 230
Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon
Jaya, B. N., Kirchlechner, C., & Dehm, G. (2015) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2015.2 · Cited by 182
Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens
Wurster, S., Motz, C., & Pippan, R. (2012) · Philosophical Magazine · doi:10.1080/14786435.2012.658449 · Cited by 178
In situ micro-cantilever tests to study fracture properties of NiAl single crystals
Iqbal, F., Ast, J., Göken, M., & Durst, K. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.10.060 · Cited by 178
Self-citationA novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
Sebastiani, M., Johanns, K. E., Herbert, E. G., Carassiti, F., & Pharr, G. M. (2014) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2014.913110 · Cited by 178
Self-citationBei, H., Shim, S., Miller, M. K., Pharr, G. M., & George, E. P. (2007) · Applied Physics Letters · doi:10.1063/1.2784948 · Cited by 170
Influence of indenter angle on cracking in Si and Ge during nanoindentation
Jang, J., & Pharr, G. M. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.05.005 · Cited by 153
3D lattice distortions and defect structures in ion-implanted nano-crystals
Hofmann, F., Tarleton, E., Harder, R., Phillips, N., Ma, P.-W., Clark, J. N., Robinson, I. K., Abbey, B., Liu, W., & Beck, C. E. (2017) · Scientific Reports · doi:10.1038/srep45993 · Cited by 139
6th International conference on fracture
(1984) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(84)90042-2 · Cited by 136
The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
Pfeifenberger, M. J., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, D., & Pıppan, R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.012 · Cited by 133
Quantitative In Situ Mechanical Testing in Electron Microscopes
Legros, M., Gianola, D. S., & Motz, C. (2010) · MRS Bulletin · doi:10.1557/mrs2010.567 · Cited by 116
Fracture mechanics of micro samples: Fundamental considerations
Pıppan, R., Wurster, S., & Kiener, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.004 · Cited by 114
Armstrong, D. E. J., Hardie, C. D., Gibson, J. S., Bushby, A. J., Edmondson, P. D., & Roberts, S. G. (2015) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2015.01.053 · Cited by 112
Application of small-scale testing for investigation of ion-beam-irradiated materials
Kiener, D., Minor, A. M., Anderoglu, O., Wang, Y., Maloy, S. A., & Hosemann, P. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.303 · Cited by 99
Fundamentals of Focused Ion Beam Nanostructural Processing: Below, At, and Above the Surface
MoberlyChan, W. J., Adams, D. P., Aziz, M. J., Hobler, G., & Schenkel, T. (2007) · MRS Bulletin · doi:10.1557/mrs2007.66 · Cited by 99
Effects of indenter angle on micro‐scale fracture toughness measurement by pillar splitting
Ghidelli, M., Sebastiani, M., Johanns, K. E., & Pharr, G. M. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15093 · Cited by 90
Self-citationOn the Equilibrium of Heterogeneous Substances
Gibbs, J. W. (2012) · heiDOK (Heidelberg University) · doi:10.11588/heidok.00013220 · Cited by 89
Korte‐Kerzel, S. (2017) · MRS Communications · doi:10.1557/mrc.2017.15 · Cited by 87
Lauener, C. M., Pethő, L., Chen, M., Xiao, Y., Michler, J., & Wheeler, J. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.015 · Cited by 85
Schiffmann, K. I. (2010) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2010.487984 · Cited by 83
Micro-mechanical measurements of fracture toughness of bismuth embrittled copper grain boundaries
Armstrong, D. E. J., Wilkinson, A. J., & Roberts, S. G. (2011) · Philosophical Magazine Letters · doi:10.1080/09500839.2011.573813 · Cited by 83
In situ stable crack growth at the micron scale
Sernicola, G., Giovannini, T., Patel, P., Kermode, J. R., Balint, D. S., Britton, T. B., & Giuliani, F. (2017) · Nature Communications · doi:10.1038/s41467-017-00139-w · Cited by 80
Microscale Fracture Behavior of Single Crystal Silicon Beams at Elevated Temperatures
Jaya, B. N., Wheeler, J. M., Wehrs, J., Best, J. P., Soler, R., Michler, J., Kirchlechner, C., & Dehm, G. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03461 · Cited by 68
Johanns, K. E., Lee, J. H., Gao, Y., & Pharr, G. M. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/22/1/015011 · Cited by 53
Mechanical Testing of Solid–Solid Interfaces at the Microscale
Kupka, D., & Lilleodden, E. T. (2011) · Experimental Mechanics · doi:10.1007/s11340-011-9530-z · Cited by 43
High temperature fracture toughness of ceramic coatings evaluated using micro-pillar splitting
Best, J. P., Wehrs, J., Polyakov, M. N., Morstein, M., & Michler, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.11.013 · Cited by 35
Schwiedrzik, J. J., Ast, J., Pethő, L., Maeder, X., & Michler, J. (2017) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12741 · Cited by 14
Self-citationKorsunsky, A. M., & Salimon, A. I. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.008 · Cited by 6
Self-citation
Metadata
- Authors
- Ast, J., Ghidelli, M., Durst, K., Göken, M., Sebastiani, M., & Korsunsky, A. M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 173
- Pages
- 107762
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2929761513
- Cited by
- 269
- References
- 44
- FWCI
- 20.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.