The DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index.
Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors
Open accessAbstract
Wetting behaviors of structured metal surfaces have received considerable attention due to the wide range of applications for commercial, industrial, and military uses as well as fundamental research interests. Due to its adaptability, precision, and ease of automation, laser-based texturing techniques are desirable platforms to create micro- and nano-structures, including laser-induced periodic surface structures, or hierarchical structures on a metal substrate. However, micro- and nanostructures alone often do not achieve the desired wettability. A subsequent surface chemistry modification method must be performed to attain target extreme wettability for laser textured metal substrates. This review aims to provide a systematic understanding of the interdependence of surface chemistry modification and physical surface structures formed during the laser-based surface engineering methods. The role of surface chemistry on top of the surface structures is presented to decide the final wetting scenario. Specifically, by controlling the surface chemistry of a laser textured surface, wetting can be modulated from extreme hydrophobicity to hydrophilicity, allowing freedom to achieve complex multi-wettability situations. In each section, we highlight the most fruitful approaches and underlying mechanisms to achieve a fitting combination of surface structures and surface chemistry. Durability and stability of the treated surface are also discussed in corrosive and abrasive environments. Finally, challenges in current studies and prospects in future research directions of this rapidly developing field are also discussed. This review will provide a comprehensive guideline for the design of laser texturing methods and the fabrication of extreme wetting surfaces for metal alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Formation of monolayer films by the spontaneous assembly of organic thiols from solution onto gold
Bain, C. D., Troughton, E. B., Tao, Y. T., Evall, J., Whitesides, G. M., & Nuzzo, R. G. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00183a049 · Cited by 3,393
Surface Roughness and Contact Angle.
Wenzel, R. N. (1949) · The Journal of Physical and Colloid Chemistry · doi:10.1021/j150474a015 · Cited by 2,321
Bioinspired Surfaces with Special Wettability
Sun, T., Feng, L., Gao, X., & Jiang, L. (2005) · Accounts of Chemical Research · doi:10.1021/ar040224c · Cited by 2,044
Design and Creation of Superwetting/Antiwetting Surfaces
Feng, X. J., & Jiang, L. (2006) · Advanced Materials · doi:10.1002/adma.200501961 · Cited by 2,030
Petal Effect: A Superhydrophobic State with High Adhesive Force
Feng, L., Zhang, Y., Xi, J., Zhu, Y., Wang, N., Xia, F., & Jiang, L. (2008) · Langmuir · doi:10.1021/la703821h · Cited by 1,982
Laibinis, P. E., Whitesides, G. M., Allara, D. L., Tao, Y. T., Parikh, A. N., & Nuzzo, R. G. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00019a011 · Cited by 1,974
Metadata
- Authors
- Samanta, A., Wang, Q., Shaw, S. K., & Ding, H.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 192
- Pages
- 108744
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W3023927841
- Cited by
- 275
- References
- 142
- FWCI
- 8.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors. https://app.cochat.ai/papers/10.1016/j.matdes.2020.108744
- The paper
- Samanta, A., Wang, Q., Shaw, S. K., & Ding, H. (2020). Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors. Materials & Design. https://doi.org/10.1016/j.matdes.2020.108744
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.