The DOI matches its Crossref record; 137 of the 137 references it cites were found in a registry or an index.
A review of 3D and 4D printing of natural fibre biocomposites
Open accessAbstract
To date, the literature has focused on synthetic fibre-reinforced composites, but it has not adequately addressed the unique properties that differentiate natural from synthetic fibres, such as their natural variation in microstructure and composition across species. This review paper proposes a critical overview of the current state of 3D printing of natural fibre-reinforced composites or biocomposites for mechanical purposes, as well as an overview of their role in 4D printing for stimuli-responsive applications. The paper is structured as follows: after the first part recalling the specificities of natural fibres and their associated composites, the two main sections are each divided into two parts presenting an analysis of the available data to provide fundamental understandings and a discussion and outlook for the future. Natural discontinuous fibre-reinforced polymers exhibit moderate mechanical properties compared to composites manufactured by conventional processes due to specific factors of the 3D printing process, such as high porosity, low fibre content, and a very low fibre-aspect ratio (L/d). Hygromorph BioComposites (HBC) are categorized into a new class of smart materials that could be used for 4D printing of shape-changing mechanisms. Fibre content, fibre orientation control, and fibre continuity are outlined in relation to known challenges in actuation performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum
Kelly, A., & Tyson, W. R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90035-9 · Cited by 2,479
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Kenaf fiber reinforced composites: A review
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Abu Bakar, A. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.04.008 · Cited by 1,274
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Self-citationMomeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Mazzanti, V., Malagutti, L., & Mollica, F. (2019) · Polymers · doi:10.3390/polym11071094 · Cited by 666
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Fernandez-Vicente, M., Calle, W., Ferrandiz, S., & Conejero, A. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0036 · Cited by 535
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Self-citationAn instant multi-responsive porous polymer actuator driven by solvent molecule sorption
Zhao, Q., Dunlop, J. W. C., Qiu, X., Huang, F., Zhang, Z., Heyda, J., Dzubiella, J., Antonietti, M., & Yuan, J. (2014) · Nature Communications · doi:10.1038/ncomms5293 · Cited by 517
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
Self-citation‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Towards the design of high-performance plant fibre composites
Bourmaud, A., Beaugrand, J., Shah, D. U., Placet, V., & Baley, C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.05.005 · Cited by 492
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Bodros, E., Pillin, I., Montrelay, N., & Baley, C. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.024 · Cited by 481
The water vapor sorption behavior of natural fibers
Hill, C. A. S., Norton, A., & Newman, G. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29725 · Cited by 467
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications
Mahjoub, R., Yatim, J. M., Sam, A. R. M., & Hashemi, S. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.036 · Cited by 407
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhang, Z., Demir, K. G., & Gu, G. X. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591541 · Cited by 392
Actuation systems in plants as prototypes for bioinspired devices
Burgert, I., & Fratzl, P. (2009) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0003 · Cited by 360
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Effect of wood content in FDM filament on properties of 3D printed parts
Kariz, M., Sernek, M., Obućina, M., & Kuzman, M. K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.016 · Cited by 360
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
3D printing of continuous flax fibre reinforced biocomposites for structural applications
Le Duigou, A., Barbé, A., Guillou, E., & Castro, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107884 · Cited by 309
Self-citationTorrado, A. R., & Roberson, D. A. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0067-4 · Cited by 291
Deroiné, M., Le Duigou, A., Corre, Y.-M., Le Gac, P.-Y., Davies, P., César, G., & Bruzaud, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.020 · Cited by 279
Bourmaud, A., Morvan, C., Bouali, A., Placet, V., Perré, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.11.031 · Cited by 276
Ayrilmis, N., Kariz, M., Kwon, J. H., & Kitek Kuzman, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03299-9 · Cited by 274
Building flax fibres: more than one brick in the walls
Morvan, C., Andème-Onzighi, C., Girault, R., Himmelsbach, D. S., Driouich, A., & Akin, D. E. (2003) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2003.07.001 · Cited by 266
Artful interfaces within biological materials
Dunlop, J. W. C., Weinkamer, R., & Fratzl, P. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70056-6 · Cited by 261
Mechanisms of the multi-shape memory effect and temperature memory effect in shape memory polymers
Sun, L., & Huang, W. M. (2010) · Soft Matter · doi:10.1039/c0sm00236d · Cited by 257
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
Bourmaud, A., & Baley, C. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.02.018 · Cited by 255
Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Coroller, G., Lefeuvre, A., Le Duigou, A., Bourmaud, A., Ausias, G., Gaudry, T., & Baley, C. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.03.018 · Cited by 254
Self-citationEffect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites
Le Duigou, A., Pillin, I., Bourmaud, A., Davies, P., & Baley, C. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.008 · Cited by 238
Self-citationResponsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Reichert, S., Menges, A., & Correa, D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.010 · Cited by 230
Self-citationSustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228
Self-expanding/shrinking structures by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/105034 · Cited by 225
Chabaud, G., Castro, M., Denoual, C., & Le Duigou, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.01.005 · Cited by 215
Self-citationEvolution of wood surface free energy after heat treatment
Gérardin, P., Petrič, M., Pétrissans, M., Lambert, J., & Ehrhardt, J. J. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.01.016 · Cited by 207
Bacillus spores as building blocks for stimuli-responsive materials and nanogenerators
Chen, X., Mahadevan, L., Driks, A., & Sahin, O. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2013.290 · Cited by 207
3D-Printed Wood: Programming Hygroscopic Material Transformations
Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0022 · Cited by 202
Self-citation4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Akhoundi, B., Behravesh, A. H., & Bagheri Saed, A. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684418807300 · Cited by 192
Martin, N., Mouret, N., Davies, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.06.012 · Cited by 191
Cork–PLA composite filaments for fused deposition modelling
Daver, F., Lee, K. P. M., Brandt, M., & Shanks, R. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.008 · Cited by 190
Plant Fibers as Reinforcement for Green Composites
Bismarck, A., Mishra, S., & Lampke, T. (2005) · doi:10.1201/9780203508206-10 · Cited by 185
Liu, H., He, H., Peng, X., Huang, B., & Li, J. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4524 · Cited by 180
Influence of environmental relative humidity on the tensile and rotational behaviour of hemp fibres
Placet, V., Cissé, O., & Boubakar, L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6191-3 · Cited by 178
Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Marrot, L., Lefeuvre, A., Pontoire, B., Bourmaud, A., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.026 · Cited by 176
Hygromorphic materials for sustainable responsive architecture
Holstov, A., Bridgens, B., & Farmer, G. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.136 · Cited by 173
Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173
Long term immersion in natural seawater of Flax/PLA biocomposite
Duigou, A. L., Bourmaud, A., Davies, P., & Baley, C. (2014) · Ocean Engineering · doi:10.1016/j.oceaneng.2014.07.021 · Cited by 170
Experimental micromechanical characterisation of wood cell walls
Eder, M., Arnould, O., Dunlop, J. W. C., Hornatowska, J., & Salmén, L. (2013) · Wood Science and Technology · doi:10.1007/s00226-012-0515-6 · Cited by 163
Moigne, N. L., Longerey, M., Taulemesse, J.-M., Bénézet, J., & Bergeret, A. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.11.022 · Cited by 160
Gamon, G., Evon, P., & Rigal, L. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.01.026 · Cited by 157
Programmable morphing composites with embedded continuous fibers by 4D printing
Wang, Q., Tian, X., Huang, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.027 · Cited by 157
Bio-Inspired Wooden Actuators for Large Scale Applications
Rüggeberg, M., & Burgert, I. (2015) · PLoS ONE · doi:10.1371/journal.pone.0120718 · Cited by 154
Duigou, A. L., Bourmaud, A., Balnois, E., Davies, P., & Baley, C. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.02.001 · Cited by 151
Cellulose fibrils direct plant organ movements
Fratzl, P., Elbaum, R., & Burgert, I. (2008) · Faraday Discussions · doi:10.1039/b716663j · Cited by 147
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xiao, X., Chevali, V. S., Song, P., Dongning, H., & Wang, H. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107887 · Cited by 147
Gallos, A., Paës, G., Allais, F., & Beaugrand, J. (2017) · RSC Advances · doi:10.1039/c7ra05240e · Cited by 146
Reversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144
4D printing with robust thermoplastic polyurethane hydrogel-elastomer trilayers
Baker, A. B., Bates, S. R. G., Llewellyn-Jones, T. M., Valori, L. P. B., Dicker, M. P. M., & Trask, R. S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.107544 · Cited by 142
Tarrés, Q., Melbø, J. K., Delgado‐Aguilar, M., Espinach, F. X., Mutjé, P., & Chinga‐Carrasco, G. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.009 · Cited by 130
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02351 · Cited by 126
High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites
Li, H., & Sain, M. M. (2003) · Polymer-Plastics Technology and Engineering · doi:10.1081/ppt-120024999 · Cited by 122
Correa, D., Poppinga, S., Mylo, M. D., Westermeier, A. S., Bruchmann, B., Menges, A., & Speck, T. (2020) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2019.0445 · Cited by 122
Self-citationCocoa Shell Waste Biofilaments for 3D Printing Applications
Tran, T. N., Bayer, I. S., Heredia‐Guerrero, J. A., Frugone, M., Lagomarsino, M., Maggio, F., & Athanassiou, A. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700219 · Cited by 120
Bioinspired Electro‐Thermo‐Hygro Reversible Shape‐Changing Materials by 4D Printing
Duigou, A. L., Chabaud, G., Scarpa, F. L., & Castro, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903280 · Cited by 119
Self-citationBourmaud, A., Duigou, A. L., Gourier, C., & Baley, C. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.007 · Cited by 113
Interfacial mechanical behavior of 3D printed ABS
Cole, D. P., Riddick, J. C., Jaim, H. M. I., Strawhecker, K. E., & Zander, N. E. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43671 · Cited by 113
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11111778 · Cited by 112
Yang, C., Wang, B., Li, D., & Tian, X. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1265992 · Cited by 111
Multifunctional composites: a metamaterial perspective
Lincoln, R. L., Scarpa, F. L., Ting, V. P., & Trask, R. S. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/ab5242 · Cited by 107
Beaugrand, J., & Berzin, F. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38468 · Cited by 106
Large-scale additive manufacturing with bioinspired cellulosic materials
Sanandiya, N. D., Vijay, Y., Dimopoulou, M., Dritsas, S., & Fernandez, J. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-26985-2 · Cited by 106
Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing
Zander, N. E., Park, J. H., Boelter, Z. R., & Gillan, M. (2019) · ACS Omega · doi:10.1021/acsomega.9b01564 · Cited by 105
Specific features of flax fibres used to manufacture composite materials
Baley, C., Gomina, M., Bréard, J., Bourmaud, A., Drapier, S., Ferreira, M., Duigou, A. L., Liotier, P., Ouagne, P., Soulat, D., et al. (2018) · International Journal of Material Forming · doi:10.1007/s12289-018-1455-y · Cited by 103
Guo, R., Ren, Z., Bi, H., Song, Y., & Xu, M. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.07.035 · Cited by 101
Natural fibres actuators for smart bio-inspired hygromorph biocomposites
Duigou, A. L., Réquilé, S., Beaugrand, J., Scarpa, F. L., & Castro, M. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa9410 · Cited by 97
Self-citationInsights into the microstructures of hygroscopic movement in plant seed dispersal
Elbaum, R., & Abraham, Y. (2014) · Plant Science · doi:10.1016/j.plantsci.2014.03.014 · Cited by 96
Pyl, L., Kalteremidou, K.-A., & Hemelrijck, D. V. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.09.022 · Cited by 95
A Review on 4D Printing Material Composites and Their Applications
Rayate, A., & Jain, P. K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.424 · Cited by 83
Structural changes during 3D printing of bioderived and synthetic thermoplastic materials
Pop, M. A., Croitoru, C., Bedő, T., Geamăn, V., Radomir, I., Mihaela Cos, N., Zaharia, S. M., Chicoș, L. A., & Milos, A. I. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47382 · Cited by 82
3D Printable Filaments Made of Biobased Polyethylene Biocomposites
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2018) · Polymers · doi:10.3390/polym10030314 · Cited by 77
Moisture-induced self-shaping flax-reinforced polypropylene biocomposite actuator
Duigou, A. L., & Castro, M. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.077 · Cited by 75
Self-citationAn autonomous shading system based on coupled wood bilayer elements
Vailati, C., Bachtiar, E. V., Haß, P., Burgert, I., & Rüggeberg, M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.042 · Cited by 74
Girdis, J., Gaudion, L., Proust, G., Löschke, S. K., & Dong, A. (2016) · JOM · doi:10.1007/s11837-016-2213-6 · Cited by 71
Distributed Manufacturing of Flexible Products: Technical Feasibility and Economic Viability
Woern, A. L., & Pearce, J. M. (2017) · Technologies · doi:10.3390/technologies5040071 · Cited by 69
Recycling of L-Poly-(lactide)-Poly-(butylene-succinate)-flax biocomposite
Bourmaud, A., Åkesson, D., Beaugrand, J., Duigou, A. L., Skrifvars, M., & Baley, C. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.018 · Cited by 67
Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing
Zhao, D. X., Cai, X., Shou, G., Gu, Y., & Wang, P. X. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.667.250 · Cited by 66
3D printed active origami with complicated folding patterns
Yuan, C., Wang, T., Dunn, M. L., et al. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0034-x · Cited by 66
Sekar, V., Fouladi, M. H., Namasivayam, S., & Sivanesan, S. (2019) · Journal of Engineering · doi:10.1155/2019/4546863 · Cited by 65
Plant Movements as Concept Generators for the Development of Biomimetic Compliant Mechanisms
Poppinga, S., Correa, D., Bruchmann, B., Menges, A., & Speck, T. (2020) · Integrative and Comparative Biology · doi:10.1093/icb/icaa028 · Cited by 58
Self-citationMoisture‐Driven Ceramic Bilayer Actuators from a Biotemplating Approach
Opdenbosch, D. V., Fritz‐Popovski, G., Wagermaier, W., Paris, O., & Zollfrank, C. (2016) · Advanced Materials · doi:10.1002/adma.201600117 · Cited by 57
Cadu, T., Berges, M., Sicot, O., Person, V., Piezel, B., Schoors, L. V., Placet, V., Corn, S., Léger, R., Divet, L., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.04.059 · Cited by 55
Shape-changing architectural skins
Vazquez, E., Randall, C. A., & Duarte, J. P. (2019) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · doi:10.7480/jfde.2019.2.3877 · Cited by 51
Duigou, A. L., & Castro, M. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.004 · Cited by 47
Self-citation3D Printed Hygroscopic Programmable Material Systems
Correa, D., & Menges, A. (2015) · MRS Proceedings · doi:10.1557/opl.2015.644 · Cited by 45
Self-citationA multi-scale study of the interface between natural fibres and a biopolymer
Duigou, A. L., Baley, C., Grohens, Y., Davies, P., Cognard, J., Créac’Hcadec, R., & Sohier, L. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.06.010 · Cited by 44
An excursion into the design space of biomimetic architectured biphasic actuators
Turcaud, S., Guiducci, L., Fratzl, P., Brechet, Y. J. M., & Dunlop, J. (2011) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.3139/146.110517 · Cited by 43
The Geometric Design and Fabrication of Actuating Cellular Structures
Guiducci, L., Weaver, J. C., Brechet, Y. J. M., et al. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500011 · Cited by 27
On the shape transformation of cone scales
Lin, S., Xie, Y. M., Li, Q., Huang, X., & Zhou, S. (2016) · Soft Matter · doi:10.1039/c6sm01805j · Cited by 25
Mechanical performance of flax-based biocomposites
Bourmaud, A., Duigou, A. L., & Baley, C. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00013-5 · Cited by 14
Zhang, P., Chen, P., Wang, B., Yu, R., Pan, H., & Wang, B. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.09.012 · Cited by 12
Cited by
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
Aisyah, H. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Khalina, A., Nurazzi, N. M., Lee, S. H., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13030471 · Cited by 263
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Metadata
- Authors
- Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 194
- Pages
- 108911
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W3037712079
- Cited by
- 280
- References
- 137
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.