The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review
Open accessAbstract
Additive Manufacturing (AM), or 3D printing, processes depend on a user-defined set of optimized process parameters to create a component. Monitoring and control of AM processes in real-time can help achieve process stability and repeatability to produce high quality parts. By applying in-situ monitoring methods to the AM process, defects in the printed parts can be detected. In this review, application of both imaging and acoustic methods for the detection of sub-surface and internal defects is discussed. Imaging methods consist of visual and thermal monitoring techniques, such as optical cameras, infrared (IR) cameras, and X-ray imaging. Many studies have been conducted that prove the reliability of imaging methods in monitoring the printing process and build area, as well as detecting defects. Acoustic methods rely on acoustic sensing technologies and signal processing methods to acquire and analyze acoustic signals, respectively. Raw acoustic emission signals can correlate to particular defect mechanisms using methods of feature extraction. In this review, representation and analysis of the acquired in-situ data from both imaging and acoustic methods is discussed, as well as the means of data processing. Ex-situ testing techniques are introduced as methods for verification of results gained from in-situ monitoring data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
FLAW3D: A Trojan-Based Cyber Attack on the Physical Outcomes of Additive Manufacturing
Pearce, H., Yanamandra, K., Gupta, N., & Karri, R. (2022) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2022.3179713 · Cited by 55
Self-citation
Cited by
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Metadata
- Authors
- AbouelNour, Y., & Gupta, N.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 222
- Pages
- 111063
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4292253977
- Cited by
- 189
- References
- 2
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review. https://app.cochat.ai/papers/10.1016/j.matdes.2022.111063
- The paper
- AbouelNour, Y., & Gupta, N. (2022). In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review. Materials & Design. https://doi.org/10.1016/j.matdes.2022.111063
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.