The DOI matches its Crossref record; 201 of the 219 references it cites were found in a registry or an index.
Thermal debinding for stereolithography additive manufacturing of advanced ceramic parts: A comprehensive review
Open accessAbstract
Stereolithography additive manufacturing (SLAM) has exhibited great potential for fabricating advanced ceramic objects with geometrically complicated structures for use in diverse fields owing to its excellent feature resolution and high surface quality. However, it is difficult to fabricate advanced ceramic parts with desired performance for structural and functional applications using this technology, because numerous binders used in ceramic SLAM must be removed by thermal debinding (TD), resulting in various defects generation and long processing period. In this review, we first focus on the raw materials used to create photocurable ceramic suspensions that greatly affect the TD process. We then highlight three important issues related to the TD process: TD mechanism, characterization method, and TD procedure design. Besides, this review summarizes the basis and principles for designing reasonable TD profiles for various practical applications. Finally, this review presents the challenges and future perspective for TD of ceramic SLAM. This review provides an overview of the crucial TD process for advanced ceramic components fabricated using SLAM approach, thus providing valuable reference information and helping readers grasp the theoretical foundation for the targeted design of TD schemes to stimulate the development of advanced ceramic parts manufactured by SLAM in both academia and industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. N. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,191
Colloidal Processing of Ceramics
Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,404
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C. J., Binner, J. G. P., Terry, A., & Goodridge, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 914
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100596 · Cited by 723
Self-citationA comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 499
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 473
A review of additive manufacturing of metamaterials and developing trends
Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 453
Self-citationAdditive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 448
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 378
Flagged first, then by citations
18 of the 219 references couldn’t be matched to a known paper.
Research works printed but not linked: 4
- Zakeri, 2021, Fabrication of self-supporting structures made of washcoat materials (γ-Al2O3-CeO2) by ceramic stereolithography: Towards digital manufacturing of enhanced catalytic converters, Mater. Design., 210
- Zhang, 2021, Porous Ceramics Based on Slurry-based Addictive Manufacturing Technique-A Short Review, J. Chinese. Ceram. Soc., 49, 1810
- Budharaju, 2023, Ceramic materials for 3D printing of biomimetic bone scaffolds – Current state-of-the-art & future perspectives, Mater. Design., 231
- Kim, 2023, Effect of non-reactive diluent on defect-free debinding process of 3D printed ceramics, Addit. Manuf., 67
Cited by
Sorted by citations
Items 101–148 of 148
Yu, Z., Ye, Z., Dejun, Z., Han, X., Zhao, K., Dong, Y., Zhang, F., & Tan, H. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2026.02.029 · Cited by 1
Li, H., Huang, Y., & Colombo, P. (2026) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2026.03.001 · Cited by 1
Manière, C., Marie, T., & Marinel, S. (2026) · Open Ceramics · doi:10.1016/j.oceram.2026.101010 · Cited by 1
Nurmi, N., Frankberg, E. J., Ismailov, A., Hautcoeur, D., Zakeri, S., Sarlin, E., & Levänen, E. (2025) · Open Ceramics · doi:10.1016/j.oceram.2025.100753 · Cited by 1
Golriz, N., & Hosseinabadi, N. (2025) · Dentistry · doi:10.5772/intechopen.1007969 · Cited by 1
Multi-Step Debinding to Prevent Cracking in Ceramic Bodies Produced by Vat PhotopolymerizationPreprint
Wang, N., Zhang, C., Chang, H., Wu, Y., Yang, R., Yao, D., & Zhai, Z. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4806334
Inada, Y., Tarutani, N., Asanome, M., Shimizu, S., Tokudome, Y., Yamada, H., Ina, T., Shimono, S., Katagiri, K., & Inumaru, K. (2025) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.25091
Yang, M. T., Yang, Z., Guo-xiang, Z., Yang, Z.-H., Jia, D., & Zhou, Y. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104931
Wang, N., Zhang, C., Chang, H., Wu, S., Chang, H., Dongxu, Y., Zhai, Z., & Yang, R. (2025) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2025.100333
Life Cycle Assessment of Injection Mold Inserts Fabricated Using Additive Manufacturing
Coronado, L. O. B., Buison, A. M., & Javate, R. J. B. (2025) · Environmental science and engineering · doi:10.1007/978-981-96-6657-7_24
Characteristics and deformation behavior of photocured polycarbosilane
Kim, J., Park, S., Shin, D.-G., & Lee, Y. (2025) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2025.117963
Yan, H., Shi, W., Dai, X., Liu, S., Wang, X., Mu, Z., Ma, S., Wang, B., Yang, G., & Liu, G. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.12.033
Self-citationDesign optimization in additive manufacturing: A review of AI applications for remanufacturing
Thulasiram, R., Gaurav, A., Jacob, A., Nath, J. K., Tusha, & Raju, D. (2025) · Multidisciplinary Reviews · doi:10.31893/multirev.2025ss0123
From PTFE Latex to Three Dimensional‐Printed Vascular Grafts Fabricated by DLP 3D Printing
Nieswic, N., Barberat, S., Mama, L., Fabre, D., Alamercery, A., Brossier, T., Lapinte, V., & Blanquer, S. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202501566
Wang, J., Zhong, K., Zhang, M., Zhang, L., Li, Y., Wang, Z. Y., Zhao, Y., Zhao, J., He, Z., & Zhou, S. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501917
Self-citationMatheus, J. P. F., & da Luz, A. P. (2025) · Materials Research · doi:10.1590/1980-5373-mr-2025-0586
Kurita, H., Wang, Z., Kudo, T., Kanno, T., Uchimoto, T., Noto, H., Grémillard, L., Cottrino, S., & Narita, F. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.02.018
da Luz, A. P., Moreira, M. H., Farias, T. W. B., Colombo, P., & Morelli, M. R. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.03.063
Gan, Y., Li, Y., Peng, C., Wang, R., Luo, Z., He, J., & Wang, X. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6403081
Türkoğlu, T., Güler, S., Kılınç, A. Ç., & Özler, B. (2026) · Pigment & Resin Technology · doi:10.1108/prt-06-2025-0069
Wang, S., Huang, F., Gao, W., An, Y., & Chen, H. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.04.177
Jian, L. W., Maidin, S., Ismail, S., & Rajendran, T. K. (2026) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2026.2661187
Zhang, F., Yan-Zhao, Z., Yang, M.-L., Guo-xiang, Z., Wang, Y.-X., Song, Z.-N., Wang, P.-Y., Li, J.-P., Yang, Z.-H., Jia, D.-C., et al. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105224
He, J., Li, X., Duan, W., Sun, Y., Wang, Z., Chen, J., Zhou, S., Chen, A., Liu, K., & Sun, H. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177253
Self-citationCheng, L., Sha, B., Hao, P., Li, Y., Li, C., Wang, M., Wu, J., Qi, X., Zhao, L., & Hu, N. (2026) · Virtual and Physical Prototyping · doi:10.1080/17452759.2026.2667624
Zhang, S., Hu, K., Li, C., Zhao, D., Huang, L., Zhang, Q., Li, L., & Lyu, Z. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.05.284
Non-reactive diluent-mediated continuous 3D printing and rapid debinding of ceramics
Chen, X., Wu, Y., Zhang, S., Yang, J., Deng, K., Wu, J., Yang, H., Qiu, F., Qiao, J., Liu, Y., et al. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2026.05.055
Picariello, P. K., Im, Y., Kolibaba, T. J., Higgins, C. I., & Brennecka, G. L. (2026) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2026.118517
Nunes, F. C., Verza, J. R., Castañeda-Bauta, R., de Camargo, Í. L., Daguano, J. K. M. B., da Luz, A. P., & Pallone, E. M. D. J. A. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.06.429
Challenges and countermeasures in the preparation of complex structure ceramic cores
Qiaolei, L. I., ZHANG, T., Yanfei, L. I. U., Tan, H., LIANG, J., & Jinguo, L. I. (2026) · Gas Turbine Experiment and Research · doi:10.3724/j.gter.20260017
Nold, J., Spies, B. C., Willems, E., Zhang, F., Weiß, F., Wesemann, C., Pichotka, M., Vach, K., Sun, J., Sandra, F., et al. (2026) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2026.107556
Wang, Z., Xu, S., Yang, L., He, X., Jiang, Y., Tian, J., Xing, B., Bowen, P., & Zhao, Z. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7195536
Gan, Y., Li, Y., Peng, C., Wang, R., Luo, Z., He, J., & Wang, X. (2026) · Powder Technology · doi:10.1016/j.powtec.2026.123035
Lu, D., Shen, Y., Zeng, Z., Li, Z., Wu, H., & Wu, S. (2026) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2026.118742
Lu, K., Xu, X., Yang, H., Yan, D., Li, S., Yuanshuo, S., Li, X., & Niu, S. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.08.098
Yang, H., Yan, D., Zhang, N., Shan, Z., Kong, X., Jiang, K., & Zhi, G. U. O. (2026) · Journal of the American Ceramic Society · doi:10.1111/jace.71093
Cao, R., Huang, C., Shi, Z., Wang, Z., Xu, L., Huang, S., Qu, M., Xu, Z., Zhang, D., Guo, B., et al. (2026) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2026.118802
Dobosz, A., Jones, G. M., Hadley, K., Smith, C. J., Laidler, I., & Crookes, R. G. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116894
Lin, Y., Yuan, S., Liu, Y., Zhang, M., Yuan, J., Zhang, Z., & Chu, X. (2026) · Powder Technology · doi:10.1016/j.powtec.2026.123167
Xu, H., Zhou, R., Fang, S., Peng, C., Wang, R., & Wang, X. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.181380
Influence of ceramic filler type on the properties of photocurable suspensions for DLP printing
Diachenko, A., Fedorchuk, O., Янушевська, О. І., Kurylenko, V., Myronyuk, O., Antoniuk, R., & Донцова, Т. (2026) · Open Ceramics · doi:10.1016/j.oceram.2026.101056
Xu, D., Huang, Y., Cai, L., Yi, B., Guo, Y., Tan, G., Shen, Z., & Zhang, Y. (2026) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2026.118870
Self-citationGüler, S., Özler, B., Türkoğlu, T., & Kılınç, A. Ç. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110621
Review: 3D printing of ceramics using direct ink writing
Kumar, A., Maji, B., & Mallik, M. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-13774-w
Wang, G., Chen, S., Hu, Y., Zhang, Q., 林宙韻, Sun, X., & Duan, J. (2026) · Materials Research Bulletin · doi:10.1016/j.materresbull.2026.114478
Peng, J., He, Y., Wang, J., Wu, X., Zhang, J., & Dai, H. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c00881
Ermakova, L. V., Khasbiullin, R. R., Saifutyarov, R. R., Ermakova, E. V., & Sokolov, P. S. (2026) · Polymers · doi:10.3390/polym18202554
Additive manufacturing of carbide ceramics: Research progress, challenges and prospects
Zhu, S., Wang, P., Liu, X., Guo, L., Zhang, Y., Prashanth, K. G., Li, H., & Colombo, P. (2026) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2026.101318
Self-citation
Metadata
- Authors
- Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y.
- Affiliations
- State Key Laboratory of Materials Processing and Die & Mould Technology (CN)
- Corresponding author
- Yan, Chunze
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2024-02
- Volume
- 238
- Pages
- 112632
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4390629817
- Cited by
- 150
- References
- 219
- Citations by year
- 2026: 59 · 2025: 70 · 2024: 21
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials & Design (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- China Postdoctoral Science Foundation (2023M741249)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Keywords
- thermal debinding, stereolithography, ceramic additive manufacturing, debinding, advanced ceramics, ceramic defects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
