Novel toughening mechanism for polylactic acid (PLA)/starch blends with layer-like microstructure via pressure-induced flow (PIF) processing

The conflicts between strength and toughness

Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989 · see citing works

An Overview of Polylactides as Packaging Materials

Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · see citing works

An overview of the recent developments in polylactide (PLA) research

Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448 · see citing works

Polymer blends and composites from renewable resources

Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107 · see citing works

Poly(lactic acid): plasticization and properties of biodegradable multiphase systems

Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562 · see citing works

Research progress in toughening modification of poly(lactic acid)

Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767 · see citing works

Crystallization behaviour of poly(ether-ether-ketone)

Cebe, P., & Hong, S.-D. (1986) · Polymer · doi:10.1016/0032-3861(86)90006-6 · Cited by 715 · see citing works

Reversible crystallization and the rigid–amorphous phase in semicrystalline macromolecules

Wunderlich, B. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00085-0 · Cited by 686 · see citing works

Morphology and properties of compatibilized polylactide/thermoplastic starch blends

Huneault, M. A., & Li, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 508 · see citing works

On crystallization phenomena in PEEK☆

Bassett, D. C., Olley, R. H., & Al-Raheil, I. A. (1988) · Polymer · doi:10.1016/0032-3861(88)90386-2 · Cited by 389 · see citing works

Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate

Wang, H., Sun, X. S., & Seib, P. A. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 278 · see citing works

Mechanical properties of poly(lactic acid) and wheat starch blends with methylenediphenyl diisocyanate

Wang, H., Sun, X. S., & Seib, P. A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10457 · Cited by 170 · see citing works

Filling of poly(lactic acid) with native starch

Jacobsen, S., & Fritz, H. ‐. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10680 · Cited by 162 · see citing works

Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate

Zhang, J., & Sun, X. S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21078 · Cited by 107 · see citing works

The starch grafted poly(l-lactide) and the physical properties of its blending composites

Chen, L., Qiu, X., Deng, M., Hong, Z., Luo, R., Chen, X., & Jing, X. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.053 · Cited by 101 · see citing works

Effect of rigid amorphous phase on glass transition behavior of poly(trimethylene terephthalate)

Hong, P., Chuang, W., Yeh, W., & Lin, T. (2002) · Polymer · doi:10.1016/s0032-3861(02)00617-1 · Cited by 72 · see citing works

Overlapping of different rearrangement mechanisms upon annealing for solution-crystallized polyethylene

Matsuda, H., Aoike, T., Uehara, H., Yamanobe, T., & Kōmoto, T. (2001) · Polymer · doi:10.1016/s0032-3861(00)00893-4 · Cited by 51 · see citing works

Biodegradable blends of poly( L ‐lactide) and starch

Kozłowski, M., Masirek, R., Piórkowska, E., & Gazicki‐Lipman, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26088 · Cited by 40 · see citing works

Rolling of polymeric materials with side constraints

MORAWIEC, J., Bartczak, Z., Kazmierczak, T., & Gałęski, A. (2001) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01194-7 · Cited by 17 · see citing works

Poly (lactic acid) blends: Processing, properties and applications

Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780 · see citing works

Thermoplastic Starch: A Possible Biodegradable Food Packaging Material—A Review

Khan, B., Niazi, M. B. K., Samin, G., & Jahan, Z. (2016) · Journal of Food Process Engineering · doi:10.1111/jfpe.12447 · Cited by 358 · see citing works

Advances in toughened polymer materials by structured rubber particles

Wang, J., Zhang, X., Jiang, L., & Qiao, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101160 · Cited by 228 · see citing works

Facile preparation of open-cellular porous poly (l-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications

Kuang, T., Chen, F., Chang, L., Zhao, Y., Fu, D., Gong, X. N., & Peng, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.023 · Cited by 221 · see citing works

State of the art and future prospectives of poly(lactic acid) based blends and composites

Sangeetha, V. H., Deka, H., Varghese, T. O., & Nayak, S. K. (2016) · Polymer Composites · doi:10.1002/pc.23906 · Cited by 216 · see citing works

Thermally induced shape memory behavior, enzymatic degradation and biocompatibility of PLA/TPU blends: “Effects of compatibilization”

DOĞAN, Ş., Boyacıoğlu, S., Kodal, M., Gökçe, Ö. F., & Ozkoc, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.04.001 · Cited by 106 · see citing works

Reactive compatibilization of PLA/TPU blends with a diisocyanate

Kemaloglu, S., Reyes, E. A., Rastogi, S., & Özkoç, G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40251 · Cited by 80 · see citing works

Water barrier and mechanical properties of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly(lactic acid) (PLA) blend bionanocomposites

Nazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Tawakkal, I. S. M. A., & Ilyas, R. A. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0033 · Cited by 68 · see citing works

A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites

Kuang, T., Ju, J., Liu, T., Hejna, A., Saeb, M. R., Zhang, S., & Peng, X. (2022) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00390-2 · Cited by 67 · see citing works

Poly(lactic acid) biocomposites with mango waste and organo‐montmorillonite for packaging

Lima, E. M. B., Lima, A. M., Minguita, A. P. D. S., dos Santos, N. R. R., Pereira, I. C. S., Neves, T. T. M., Gonçalves, L. F. D. C., Moreira, A. P., Middea, A., Neumann, R., et al. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47512 · Cited by 58 · see citing works

Crystallization, Morphological, and Mechanical Response of Poly(Lactic Acid)/Lignin-Based Biodegradable Composites

Singla, R. K., Maiti, S. N., & Ghosh, A. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098688 · Cited by 57 · see citing works

Perspectives of polylactic acid from structure to applications

Sreekumar, K., Bindhu, B., & Veluraja, K. (2021) · Polymers from Renewable Resources · doi:10.1177/20412479211008773 · Cited by 53 · see citing works

Supercritical CO2 foaming of pressure-induced-flow processed linear polypropylene

Fu, D., Chen, F., Kuang, T., Li, D., Peng, X., Chiu, D. Y., Lin, C. S., & Lee, L. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.012 · Cited by 50 · see citing works

The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer Composites

Ghaffar, S. H., Madyan, O. A., Fan, M., & Corker, J. (2018) · Macromolecular Research · doi:10.1007/s13233-018-6119-8 · Cited by 47 · see citing works

A trade-off between carbon and water impacts in bio-based box production chains in Thailand: A case study of PS, PLAS, PLAS/starch, and PBS

Cheroennet, N., Pongpinyopap, S., Leejarkpai, T., & Suwanmanee, U. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.152 · Cited by 43 · see citing works

Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree

Zhou, L., Zhao, G., Feng, Y., Yin, J., & Jiang, W. J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.022 · Cited by 41 · see citing works

Confine Clay in an Alternating Multilayered Structure through Injection Molding: A Simple and Efficient Route to Improve Barrier Performance of Polymeric Materials

Yu, F., Deng, H., Bai, H., Zhang, Q., Wang, K., Chen, F., & Fu, Q. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00347 · Cited by 37 · see citing works

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Hu, H., Xu, A., Zhang, D., Zhou, W., Peng, S., & Zhao, X. (2020) · Molecules · doi:10.3390/molecules25245951 · Cited by 36 · see citing works

Accelerated biodegradation of PLA/PHB-blended nonwovens by a microbial community

Liu, Y., Zhan, Z., Ye, H., Lin, X., Yan, Y., & Zhang, Y. (2019) · RSC Advances · doi:10.1039/c8ra10591j · Cited by 35 · see citing works

Mechanical and gas permeability properties of poly(L‐lactic acid)–based films and their application in fresh produce preservation—Review

Yun, X., Liu, L., Hu, J. S., Sun, T., Zhang, J., & Dong, T. (2024) · Packaging Technology and Science · doi:10.1002/pts.2796 · Cited by 33 · see citing works

Starch/polylactide sustainable composites: Interface tailoring with graphene oxide

Nuona, A., Li, X., Zhu, X., Xiao, Y., & Che, J. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.11.025 · Cited by 32 · see citing works

A Simple, Low-Cost, and Green Method for Preparing Strong, Tough, and Ductile Poly(lactic acid) Materials with Good Transparency and Heat Resistance

Kuang, T., Zhang, J., Chen, F., Fei, Y., Zhou, H., Weng, Y., Liu, T., Yang, J., & Zhong, M. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05613 · Cited by 26 · see citing works

Eco-friendly biodegradable polymers: Sustainable future

Kuang, T., Esmaeili, A., & Ehsani, M. (2022) · Polymers from Renewable Resources · doi:10.1177/20412479221109875 · Cited by 24 · see citing works

Biomimetically Structured Poly(lactic acid)/Poly(butylene-adipate- co -terephthalate) Blends with Ultrahigh Strength and Toughness for Structural Application

Wang, Z., Liu, T., Yang, J., Chen, F., Fei, Y., Zhong, M., & Kuang, T. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01606 · Cited by 24 · see citing works

Fabrication of high strength PA6/PP blends with pressure-induced-flow processing

Fu, D., Kuang, T., Chen, F., Lee, L. J., & Peng, X. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.08.043 · Cited by 24 · see citing works

PLA-based blends and composites

Deeraj, B. D. S., Jayan, J. S., Saritha, A., & Joseph, K. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823791-5.00014-4 · Cited by 23 · see citing works

Enhanced strength and foamability of high-density polyethylene prepared by pressure-induced flow and low-temperature crosslinking

Kuang, T., Chen, F., Fu, D., Chang, L., Peng, X., & Lee, L. J. (2016) · RSC Advances · doi:10.1039/c6ra05238j · Cited by 23 · see citing works

Morphology Evolution of Polymer Blends under Intense Shear During High Speed Thin-Wall Injection Molding

Zhou, Y., Yu, F., Deng, H., Huang, Y., Li, G., & Fu, Q. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b03374 · Cited by 23 · see citing works

Study on biocompatible PLLA–PEG blends with high toughness and strength via pressure-induced-flow processing

Feng, X., Zhang, S., Zhu, S., Han, K., Jiao, M., Song, J., Ma, Y., & Yu, M. (2013) · RSC Advances · doi:10.1039/c3ra40899j · Cited by 21 · see citing works

Polyamide 6 modified polypropylene with remarkably enhanced mechanical performance, thermal properties, and foaming ability via pressure‐induced‐flow processing approach

Fu, D., Chen, F., Peng, X., & Kuang, T. (2018) · Advances in Polymer Technology · doi:10.1002/adv.21945 · Cited by 21 · see citing works

Bioinspired nacre-like PEEK material with superior tensile strength and impact toughness

Zhu, S., Yan, T., Huang, X., Hassan, E. A. M., Zhou, J., Zhang, S., Xiong, M., Yu, M., & Li, Z. (2022) · RSC Advances · doi:10.1039/d2ra00667g · Cited by 19 · see citing works

Enhanced Mechanical Properties of Uniaxially Stretched Polylactide/Poly(ethylene oxide)-b-Poly(butylene oxide) Blend Films

Zhao, B., McCutcheon, C. J., Jin, K., Lyadov, I., Zervoudakis, A. J., Bates, F. S., & Ellison, C. J. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01634 · Cited by 18 · see citing works

The morphology, rheological, and mechanical properties of wood flour/starch/poly(lactic acid) blends

Lv, S., Gu, J., Tan, H., & Zhang, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44743 · Cited by 18 · see citing works

Preparation of PLA with High Impact‐Toughness and Reduced Internal Stress via Formation of Laminated, Bimodal Structure with Micro/Nanocells

Xiang, P., Bi, S., Mei, F., Deng, C., Yu, D., Chen, X., & Yu, P. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100426 · Cited by 17 · see citing works

Studies on Melt Processable Biocomposites of Polylactic Acid

Joseph, S., Deenadayalan, E., & Mahanwar, P. A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0668-5 · Cited by 14 · see citing works

NMR relaxometry evaluation of nanostructured starch-PLA blends

Brito, L. M., Sebastião, P. J., & Tavares, M. I. B. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.011 · Cited by 14 · see citing works

Improvement of the biocompatibility of polyhydroxyalkanoate by filling with hyaluronic acid

Hsu, Y., Wu, C.-S., Liao, H., & Cai, Y. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9350-0 · Cited by 12 · see citing works

Composites Based on Starch and Polylactide

Rogovina, S. Z., Prut, E. V., Владимировна, А. К., Krasheninnikov, V. G., Perepelitsina, E. O., Шашкин, Д. П., & Берлин, А. А. (2019) · Polymer Science Series B · doi:10.1134/s1560090419030114 · Cited by 12 · see citing works

High sound insulation property of prepared polypropylene/polyolefin elastomer blends by combining pressure-induced-flow processing and supercritical CO2 foaming

Du, Z., Chen, F., Fei, Y., Jin, J., Li, P., Kuang, T., Xiao, Y., Ruan, S., & Lu, H. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100958 · Cited by 11 · see citing works

Synergistic Effect of Mesoporous SBA‐15 Particles and Processing Strategy for Improving PLA Crystallization Capability in their Composites

Díez‐Rodríguez, T. M., Blázquez‐Blázquez, E., Barranco‐García, R., Pérez, E., & Cerrada, M. L. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200308 · Cited by 11 · see citing works

Tough and soundproof PBAT/PLA composite foams with a multilayer oriented porous architecture

Chen, F., Shen, R., Ye, J., Liu, Z., Liu, T., Chen, Z., Kuang, T., Jin, J., & Fei, Y. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102402 · Cited by 10 · see citing works

The Influence of Pressure-Induced-Flow Processing on the Morphology, Thermal and Mechanical Properties of Polypropylene Blends

Li, P., Fei, Y., Ruan, S., Yang, J., Chen, F., & Jin, Y. (2021) · Journal of Composites Science · doi:10.3390/jcs5030064 · Cited by 8 · see citing works

Study on the Properties of Esterified Corn Starch/Polylactide Biodegradable Blends

Zheng, Y., Xu, M., Tian, J., Yu, M., Tan, B., Zhao, H., & Tang, Y. (2022) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2022.019702 · Cited by 7 · see citing works

The effect of carbon nanotubes-grafted lactide on the mechanical and thermal properties of poly (lactic acid) biocomposites

Wu, G., Liu, S., Wu, X., & Ding, X. (2017) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417696155 · Cited by 5 · see citing works

Simultaneous Effect of Wood Flour and Starch‐Based Compound on the Mechanical Behavior of Polylactic Acid ( PLA )

Salimian, A., Zebarjad, S. M., & Sherafat, Z. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70160 · Cited by 4 · see citing works

Preparation of poly(lactic acid) with excellent comprehensive properties via simple deformation or microfibrillation of spherulites

Xiang, P., Fan, L., Li, S., Cao, N., Wan, C., Bi, S., Chen, X., & Yu, P. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51539 · Cited by 4 · see citing works

PLA binary bioblends with other biopolymers

Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00005-4 · Cited by 3 · see citing works

Simultaneous Improvement of Strength and Toughness of Poly(lactic acid) via Multiple Dynamic Pressure

Rao, W.-X., Li, L., Zhang, S.-H., Huang, G.-M., Zheng, J.-C., Yuan, C., Huang, Z.-X., & Qu, J.-P. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3379-6 · Cited by 2 · see citing works

An application of pressure-induced flow with no constraint direction on improvement of mechanical properties for isotactic polypropylene/propylene-ethylene copolymer blends

Hua, C., Wang, W., Li, N., Luo, J., Wang, X., & Wang, Z. (2025) · Polymer · doi:10.1016/j.polymer.2025.128663 · Cited by 2 · see citing works

Fracture and Failure of Starch-based Composites

Bernal, C. (2015) · Royal Society of Chemistry eBooks · doi:10.1039/9781782622796-00326 · Cited by 2 · see citing works

Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature

Zhu, S., Zhang, K., Hu, Y., Xiong, M., Zhang, S., Jiao, M., & Yu, M. (2018) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/436/1/012006 · Cited by 1 · see citing works

Effect of L-lactic acid oligomer (OLLA) to cassava starch ratio on characteristics and mechanical properties of blend film

Rahmayetty, Kanani, N., Wardalia, & Wardhono, E. Y. (2021) · AIP conference proceedings · doi:10.1063/5.0062266

Tribological Properties and Synergistic Lubrication Mechanism of Pressure‐Induced Flow Self‐Lubricating MoS 2 / PTFE Composites

Yang, S., Dong, E., Hu, L., Hao, X., & Zhu, H. (2026) · Polymer Composites · doi:10.1002/pc.71410

Biodegradability of sisal fabric reinforced PLA composites in different soil mediums for single-use eco-friendly applications

Kanakannavar, S., Thalla, A. K., & Pitchaimani, J. (2026) · Engineering Research Express · doi:10.1088/2631-8695/aea5de

Study on biocompatible PLLA–PEG blends with high toughness and strength via pressure-induced-flow processing

Feng, X., Zhang, S., Zhu, S., Han, K., Jiao, M., Song, J., Ma, Y., & Yu, M. (2013) · RSC Advances · doi:10.1039/c3ra40899j · Cited by 21 · see citing works

Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate

Wang, H., Sun, X. S., & Seib, P. A. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 278 · see citing works

Poly(lactic acid) formulations with improved toughness by physical blending with thermoplastic starch

Ferri, J. M., García‐García, D., Carbonell‐Verdu, A., Fenollar, O., & Balart, R. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45751 · Cited by 62 · see citing works

Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies

Koh, J. J., Zhang, X., & He, C. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.048 · Cited by 201 · see citing works

Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature

Zhu, S., Zhang, K., Hu, Y., Xiong, M., Zhang, S., Jiao, M., & Yu, M. (2018) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/436/1/012006 · Cited by 1 · see citing works