The DOI matches its Crossref record.
Creating metal parts by Fused Deposition Modeling and Sintering
Abstract
Abstract Conventional metal 3D printings are generally high energy consuming and expensive. As an alternative, Fused Deposition Modeling and Sintering (FDMS) was proposed for fast making metal parts at low energy consumption and low cost. Metal/polymer composite filament is printed by the printer based on Fused Deposition Modeling (FDM), and then debinding and sintering are conducted on the printed parts to form compact metal parts. Microstructural characteristics of the 316L/POM filament, printed parts and the final FDMS 316L parts are observed. Besides, the hardness, tensile properties, relative density, and part shrinkage were measured to understand the characteristics of the sintered FDMS 316L parts. Because the internal porosity and defects decrease the mechanical properties, the FDMS metal parts are suitable for applications without stringent requirements of strength, such as the functional products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Metadata
- Authors
- Liu, B., Wang, Y., Lin, Z., & Zhang, T.
- Venue
- Materials Letters
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 263
- Pages
- 127252
- ISSN
- 0167-577X (ISSN-L)
- OpenAlex
- W2997441922
- Cited by
- 242
- References
- 0
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.