The DOI matches its Crossref record.
Ultrastrong Graphene Films via Long-Chain π-Bridging
Open accessAbstract
Summary Converting natural graphite to high-performance graphene films is very attractive due to graphite's abundance. However, this conversion is challenging to do inexpensively and under ambient conditions. One of the major challenges is how to design the interface between adjacent graphene nanosheets to integrate high strength, high toughness, and high conductivity into graphene films. Here, we demonstrate that a long-chain π-π bonding agent can bridge reduced graphene oxide nanosheets into ultrastrong, supertough, and highly conductive graphene films. The strain dependence of Raman frequency shift and molecular dynamics simulations together reveal the strengthening and toughening mechanisms. Additionally, the long-chain π-bridging induces substantial improvement in the graphene nanosheet alignment. The tensile strength and toughness are 1,054 MPa and 36 MJ/m3, surpassing those of reported graphene films. Meanwhile, the electrical conductivity reaches 1,192 S/cm, comparable with high-temperature annealed graphene films. The bioinspired strategy opens an avenue for the assembly of nanoscale building blocks into high-performance films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Super-tough MXene-functionalized graphene sheets
Zhou, T., Wu, C., Wang, Y., Tomsia, A. P., Li, M., Saiz, E., Fang, S., Baughman, R. H., Jiang, L., & Cheng, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-15991-6 · Cited by 578
Self-citationGraphene Properties, Synthesis and Applications: A Review
Urade, A. R., Lahiri, I., & Suresh, K. S. (2023) · JOM · doi:10.1007/s11837-022-05505-8 · Cited by 490
Zhu, Y., Liu, J., Guo, T., Wang, J. J., Tang, X., & Nicolosi, V. (2021) · ACS Nano · doi:10.1021/acsnano.0c08830 · Cited by 356
Metadata
- Authors
- Wan, S., Chen, Y., Wang, Y., Li, G., Wang, G., Liu, L., Zhang, J., Liu, Y., Xu, Z., Tomsia, A. P., Jiang, L., & Cheng, Q.
- Venue
- Matter
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 1
- Issue
- 2
- Pages
- 389-401
- ISSN
- 2590-2385 (ISSN-L)
- OpenAlex
- W2945790939
- Cited by
- 159
- References
- 0
- FWCI
- 7.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ultrastrong Graphene Films via Long-Chain π-Bridging. https://app.cochat.ai/papers/10.1016/j.matt.2019.04.006
- The paper
- Wan, S., Chen, Y., Wang, Y., Li, G., Wang, G., Liu, L., Zhang, J., Liu, Y., Xu, Z., Tomsia, A. P., Jiang, L., & Cheng, Q. (2019). Ultrastrong Graphene Films via Long-Chain π-Bridging. Matter. https://doi.org/10.1016/j.matt.2019.04.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.