The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review
Abstract
Abstract Aerospace and medical manufacturing fields develop rapidly benefiting from excellent mechanical and physical properties of titanium and nickel alloys, including superior strength-to-weight ratio, high mechanical strength, excellent high corrosion resistance, and excellent biocompatibility. Since the components of aerospace and medical fields are manufactured to improve the functional performances as the goal, surface integrity is regarded as key a factor in assessing surface qualities. Titanium and nickel alloys belong to difficult-to-cut materials due to poor machinability. The tool extremely easy wears out and the available tool life diminishes rapidly, which results in surface integrity deteriorated. This article aims to review the effects of tool wear on surface integrity in cutting titanium and nickel alloys. The typical surface integrity characteristics including surface topography (surface defects and surface roughness), microstructural alterations (plastic deformation, grain sizes, and white layer), and mechanical properties (microhardness and residual stress) are reviewed. The possible perspectives of future work for tool wear effects on surface integrity are also put forward.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Machining induced surface integrity in titanium and nickel alloys: A review
Ulutan, D., & Ozel, T. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2010.11.003 · Cited by 1,252
Surface integrity in material removal processes: Recent advances
Jawahir, I. S., Brinksmeier, E., M’Saoubi, R., Aspinwall, D. K., Outeiro, J. C., Meyer, D., Umbrello, D., & Jayal, A. D. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.05.002 · Cited by 970
Key improvements in the machining of difficult-to-cut aerospace superalloys
Ezugwu, E. O. (2005) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.02.003 · Cited by 945
The machinability of nickel-based alloys: a review
Ezugwu, E. O., Wang, Z. M., & Machado, A. R. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(98)00314-8 · Cited by 857
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
State-of-the-art in surface integrity in machining of nickel-based super alloys
Thakur, A., & Gangopadhyay, S. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2015.10.001 · Cited by 698
Tool wear characteristics in machining of nickel-based superalloys
Zhu, D., Zhang, X., & Ding, H. (2013) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.08.001 · Cited by 580
High performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567
The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V
Che-Haron, C. H., & Jawaid, A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.08.012 · Cited by 491
Problems and solutions in machining of titanium alloys
Pramanik, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5326-x · Cited by 382
M’Saoubi, R., Outeiro, J. C., Chandrasekaran, H., Dillon, O. W., & Jawahir, I. S. (2008) · International Journal of Sustainable Manufacturing · doi:10.1504/ijsm.2008.019234 · Cited by 336
A comprehensive experimental study on surface integrity by end milling Ti–6Al–4V
Sun, J., & Guo, Y. B. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.09.022 · Cited by 317
MACHINABILITY OF NICKEL-BASED HIGH TEMPERATURE ALLOYS
Arunachalam, R., & Mannan, M. A. (2000) · Machining Science and Technology · doi:10.1080/10940340008945703 · Cited by 311
Surface integrity of dry machined titanium alloys
Ginting, A., & Nouari, M. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2008.10.011 · Cited by 302
Attributes, characteristics, and applications of titanium and its alloys
Boyer, R. R. (2010) · JOM · doi:10.1007/s11837-010-0071-1 · Cited by 302
Advanced Machining Processes of Metallic Materials: Theory, Modelling, and Applications
Grzesik, W. (2016) · Cited by 277
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
Pervaiz, S., Rashid, A., Deiab, I., & Nicolescu, M. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2014.880460 · Cited by 276
An analysis of the residual stresses generated in Inconel 718™ when turning
Sharman, A. R. C., Hughes, J. I., & Ridgway, K. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.12.007 · Cited by 269
Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools
Arunachalam, R. M., Mannan, M. A., & Spowage, A. C. (2004) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2004.05.005 · Cited by 244
An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
Pawade, R. S., Joshi, S. S., Brahmankar, P. K., & Rahman, M. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.04.049 · Cited by 229
Workpiece Surface Integrity and Tool Life Issues When Turning Inconel 718? Nickel Based Superalloy
Sharman, A. R. C., Hughes, J. I., & Ridgway, K. (2004) · Machining Science and Technology · doi:10.1081/lmst-200039865 · Cited by 193
Machining of Titanium Alloy(Ti-6Al-4V)—Theory to Application
Pramanik, A., & Littlefair, G. (2015) · Machining Science and Technology · doi:10.1080/10910344.2014.991031 · Cited by 191
Grzesik, W., Niesłony, P., Habrat, W., Sieniawski, J., & Laskowski, P. (2018) · Tribology International · doi:10.1016/j.triboint.2017.10.005 · Cited by 185
Lee, W.-C., Wei, C.-C., & Chung, S.-C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.004 · Cited by 160
Liang, X., & Liu, Z. (2018) · Tribology International · doi:10.1016/j.triboint.2018.01.057 · Cited by 151
Self-citationSurface integrity analysis of machined Inconel 718 over multiple length scales
M’Saoubi, R., Larsson, T., Outeiro, J. C., Guo, Y., Suslov, S., Saldaña, C., & Chandrasekar, S. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.03.058 · Cited by 142
Surface Roughness Analysis in Machining of Titanium Alloy
Ramesh, S., Karunamoorthy, L., & Palanikumar, K. (2008) · Materials and Manufacturing Processes · doi:10.1080/10426910701774700 · Cited by 142
Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools
Su, H., Liu, P., Fu, Y., et al. (2012) · Chinese Journal of Aeronautics · doi:10.1016/s1000-9361(11)60445-7 · Cited by 139
The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718™
Sharman, A. R. C., Hughes, J., & Ridgway, K. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.09.002 · Cited by 139
Imran, M., Mativenga, P. T., Gholinia, A., & Withers, P. J. (2013) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2013.10.002 · Cited by 130
The Effect of Cutting Tool Material and Edge Geometry on Tool Life and Workpiece Surface Integrity
Hughes, J., Sharman, A. R. C., & Ridgway, K. (2006) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440506x78192 · Cited by 129
Modelling the Effects of Flank Wear Land and Chip Formation on Residual Stresses
Chen, L., El-Wardany, T. I., & Harris, W. C. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60653-2 · Cited by 129
Zhou, J., Bushlya, V., & Ståhl, J.-E. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.09.022 · Cited by 128
Niaki, F. A., & Mears, L. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.09.016 · Cited by 113
Sharman, A. R. C., Hughes, J., & Ridgway, K. (2008) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem936 · Cited by 110
Fernández-Valdivielso, A., de Lacalle, L. N. L., Urbikaín, G., et al. (2015) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406215616145 · Cited by 106
High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools
Schoop, J., Sales, W. F., & Jawahir, I. S. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.07.002 · Cited by 100
Machinability and surface integrity of RR1000 nickel based superalloy
Soo, S. L., Hood, R., Aspinwall, D. K., Voice, W. E., & Sage, C. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.094 · Cited by 96
Liang, X., Liu, Z., Wang, B., et al. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.02.031 · Cited by 96
Self-citationEffect Tool Wear During End Milling on the Surface Integrity and Fatigue Life of Inconel 718
Li, W., Guo, Y. B., Barkey, M. E., & Jordon, J. B. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.056 · Cited by 93
Houchuan, Y., Zhitong, C., & ZiTong, Z. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6593-x · Cited by 89
Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
M’Saoubi, R., Axinte, D. A., Herbert, C. R. J., Hardy, M., & Salmon, P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.03.067 · Cited by 87
Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
Zhou, J., Bushlya, V., Peng, R. L., Johansson, S., Avdovic, P., & Stahl, J.-E. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.133 · Cited by 84
Characterization of White Layer Generated when Turning Aged Inconel 718
Bushlya, V., Zhou, J., Lenrick, F., Avdovic, P., & Ståhl, J.-E. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.080 · Cited by 79
Liang, X., & Liu, Z. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0654-x · Cited by 79
Self-citationMohsan, A. U. H., Liu, Z., & Padhy, G. K. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9737-3 · Cited by 78
Self-citationTazehkandi, A. H., Shabgard, M., & Pilehvarian, F. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.039 · Cited by 75
Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy
Dargusch, M. S., Sun, S., Kim, J. W., Li, T., Trimby, P. W., & Cairney, J. M. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.12.003 · Cited by 70
Xu, W., & Zhang, L. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.01.018 · Cited by 68
Study of surface quality in machining nickel-based alloy Inconel 718
Fan, Y., Hao, Z., Zheng, M., Sun, F., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5225-1 · Cited by 67
Zhou, J., Bushlya, V., Peng, R. L., Chen, Z., Johansson, S., & Ståhl, J. E. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.04.026 · Cited by 67
Herbert, C. R. J., Axinte, D. A., Hardy, M., & Withers, P. J. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4027619 · Cited by 63
Bonyár, A., Sántha, H., Varga, M., et al. (2012) · International Journal of Material Forming · doi:10.1007/s12289-012-1119-2 · Cited by 55
Surface Integrity and Fatigue Behavior for High-Speed Milling Ti–10V–2Fe–3Al Titanium Alloy
Yao, C., Tan, L., Ren, J., Lin, Q., & Liang, Y. S. (2013) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-013-9772-4 · Cited by 55
Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825
Thakur, A., Gangopadhyay, S., & Maity, K. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000274 · Cited by 54
EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY—INCONEL 718
Cai, X., Qin, S., Li, J., et al. (2014) · Machining Science and Technology · doi:10.1080/10910344.2014.863627 · Cited by 53
Farid, A. A., Sharif, S., & Namazi, H. (2009) · SAE International Journal of Materials and Manufacturing · doi:10.4271/2009-01-1412 · Cited by 52
Study of tool wear and chemical interaction during machining of Ti6Al4V
Kaplan, B., Odelros, S., Kritikos, M., Bejjani, R., & Norgren, S. M. (2017) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2017.12.012 · Cited by 48
Tribological compatibility and improvement of machining productivity and surface integrity
Veldhuis, S. C., Dosbaeva, G. K., & Yamamoto, K. (2009) · Tribology International · doi:10.1016/j.triboint.2009.02.004 · Cited by 36
Experimental Investigations Into the Carbide Cracking Phenomenon on Inconel 718 Superalloy Material
Ranganath, S., Guo, C., & Holt, S. (2009) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2009-84085 · Cited by 35
Advanced materials mean advanced engines
Miller, S. (1995) · Interdisciplinary Science Reviews · doi:10.1179/isr.1995.20.4.117 · Cited by 35
Optimal cutting conditions when dry end milling the aeroengine material Ti–6242S
Ginting, ., & Nouari, M. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.10.051 · Cited by 34
Pretorius, C. J., Soo, S. L., Aspinwall, D. K., et al. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.04.058 · Cited by 33
Simultaneous Optimizing Residual Stress and Surface Roughness in Turning of Inconel718 Superalloy
Jafarian, F., Amirabadi, H., Sadri, J., & Banooie, H. R. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2013.864413 · Cited by 33
Modeling subsurface deformation induced by machining of Inconel 718
Agmell, M., Ahadi, A., Zhou, J., Peng, R. L., Bushlya, V., & Ståhl, J.-E. (2017) · Machining Science and Technology · doi:10.1080/10910344.2016.1260432 · Cited by 32
Tool life and workpiece surface integrity when turning an RR1000 nickel-based superalloy
Hood, R., Soo, S. L., Aspinwall, D. K., et al. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2371-5 · Cited by 26
Cited by
State-of-The-Art Cooling and Lubrication for Machining Inconel 718
De Bartolomeis, A., Newman, S. T., Biermann, D., & Shokrani, A. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047842 · Cited by 43
“Therefore, C&L systems for machining Inconel 718 have a vital role in improving its machinability and extend its sustainable industrial fields [7, 8].”
BackgroundMethodInfluential
Metadata
- Authors
- Liang, X., Liu, Z., & Wang, B.
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 132
- Pages
- 150-181
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W2891545870
- Cited by
- 280
- References
- 67
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.