The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Machining of Titanium Alloy(Ti-6Al-4V)—Theory to Application
Abstract
This article correlates laboratory-based understanding in machining of titanium alloys with the industry based outputs and finds possible solutions to improve machining efficiency of titanium alloy Ti-6Al-4V. The machining outputs are explained based on different aspects of chip formation mechanism and practical issues faced by industries during titanium machining. This study also analyzed and linked the methods that effectively improve the machinability of titanium alloys. It is found that the deformation mechanism during machining of titanium alloys is complex and causes basic challenges, such as sawtooth chips, high temperature, high stress on cutting tool, high tool wear and undercut parts. These challenges are correlated and affected by each other. Sawtooth chips cause variation in cutting forces which results in high cyclic stress on cutting tools. On the other hand, low thermal conductivity of titanium alloy causes high temperature. These cause a favorable environment for high tool wear. Thus, improvements in machining titanium alloy depend mainly on overcoming the complexities associated with the inherent properties of this alloy. Vibration analysis kit, high pressure coolant, cryogenic cooling, thermally enhanced machining, hybrid machining and, use of high conductive cutting tool and tool holders improve the machinability of titanium alloy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405
A finite element model of high speed metal cutting with adiabatic shearing
Bäker, M., Rösler, J., & Siemers, C. (2002) · Computers & Structures · doi:10.1016/s0045-7949(02)00023-8 · Cited by 189 · cited 2×
“(Bäker et al., 2002) applied remeshing technique with an implicit scheme.”
Method
Cited by
Liang, X., Liu, Z., & Wang, B. (2019) · Measurement · doi:10.1016/j.measurement.2018.09.045 · Cited by 280
Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools
Younas, M., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13548-1 · Cited by 17
Metadata
- Authors
- Pramanik, A., & Littlefair, G.
- Venue
- Machining Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2015-01-02
- Volume
- 19
- Issue
- 1
- Pages
- 1-49
- ISSN
- 1091-0344 (ISSN-L)
- 1532-2483
- OpenAlex
- W2139589308
- Cited by
- 191
- References
- 2
- FWCI
- 8.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Machining of Titanium Alloy(Ti-6Al-4V)—Theory to Application. https://app.cochat.ai/papers/10.1080/10910344.2014.991031
- The paper
- Pramanik, A., & Littlefair, G. (2015). Machining of Titanium Alloy(Ti-6Al-4V)—Theory to Application. Machining Science and Technology. https://doi.org/10.1080/10910344.2014.991031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.