The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings
Abstract
Abstract Large-scale wind turbine bearings including main bearings, gearbox bearings, generator bearings, blade bearings and yaw bearings, are critical components for wind turbines to convert kinetic wind energy into electrical energy. Unlike general-purpose industrial bearings, the loads and rotation speeds of wind turbine bearings change considerably because of dynamic wind flows. In the case of some extreme operating conditions, large-scale wind turbine bearings suffer excessive loads and they can be potentially damaged. Therefore, it is essential to develop reliable and cost-effective condition monitoring and fault diagnosis methods to assess the damage level and failure modes so that a proper maintenance plan can be designed. This paper aims at systematically and comprehensively summarizing current large-scale wind turbine bearing failure modes and condition monitoring and fault diagnosis achievements. Firstly, the representative failure modes of large-scale wind turbine bearings are reviewed in detail which can help to understand the causes and effects of the tribological issues of these bearings. Then, condition monitoring and fault diagnosis methods of large-scale wind turbine bearings are presented; within which failure modes, experimental scale and signal processing approaches are summarized. Finally, a number of popular condition monitoring and fault diagnosis approaches that can be potentially used for wind turbine bearings are reviewed, followed by a brief summary of future research directions for wind turbine bearing fault diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines
Polinder, H., Van Der Pijl, F. F. A., De Vilder, G.-J., & Tavner, P. J. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.875476 · Cited by 1,128
Stochastic resonance and sensory information processing: A tutorial and review of application
Moss, F., Ward, L. M., & Sannita, W. G. (2004) · Clinical Neurophysiology · doi:10.1016/j.clinph.2003.09.014 · Cited by 994
The local mean decomposition and its application to EEG perception data
Smith, J. S. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0058 · Cited by 983
A review on data-driven fault severity assessment in rolling bearings
Cerrada, M., Sánchez, R.-V., Li, C., Pacheco, F., Cabrera, D., Valente de Oliveira, J., & Vásquez, R. E. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.012 · Cited by 724
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Rolling bearing fault diagnosis using an optimization deep belief network
Shao, H., Jiang, H., Zhang, X., & Niu, M. (2015) · Measurement Science and Technology · doi:10.1088/0957-0233/26/11/115002 · Cited by 517
Fault diagnosis of wind turbine based on Long Short-term memory networks
Lei, J., Liu, C., & Jiang, D. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.10.031 · Cited by 507
Carneiro, P. A., Umbuzeiro, G. A., Oliveira, D. P., & Zanoni, M. V. B. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.09.106 · Cited by 477
Cited by
Badihi, H., Zhang, Y., Jiang, B., Pillay, P., & Rakheja, S. (2022) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3171691 · Cited by 319
Deep transfer learning with limited data for machinery fault diagnosis
Han, T., Liu, C., Wu, R., & Jiang, D. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107150 · Cited by 268
Ahmad, I., Hee, L. M., Abdelrhman, A. M., Imam, S. A., & Leong, M. S. (2021) · Measurement · doi:10.1016/j.measurement.2021.109856 · Cited by 88
Ewert, P., Orlowska-Kowalska, T., & Jankowska, K. (2021) · Energies · doi:10.3390/en14030712 · Cited by 48
Metadata
- Authors
- Liu, Z., & Zhang, L.
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 149
- Pages
- 107002
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W2971479067
- Cited by
- 535
- References
- 76
- FWCI
- 28.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings. https://app.cochat.ai/papers/10.1016/j.measurement.2019.107002
- The paper
- Liu, Z., & Zhang, L. (2020). A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings. Measurement. https://doi.org/10.1016/j.measurement.2019.107002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.