The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings
Abstract
Abstract Large-scale wind turbine bearings including main bearings, gearbox bearings, generator bearings, blade bearings and yaw bearings, are critical components for wind turbines to convert kinetic wind energy into electrical energy. Unlike general-purpose industrial bearings, the loads and rotation speeds of wind turbine bearings change considerably because of dynamic wind flows. In the case of some extreme operating conditions, large-scale wind turbine bearings suffer excessive loads and they can be potentially damaged. Therefore, it is essential to develop reliable and cost-effective condition monitoring and fault diagnosis methods to assess the damage level and failure modes so that a proper maintenance plan can be designed. This paper aims at systematically and comprehensively summarizing current large-scale wind turbine bearing failure modes and condition monitoring and fault diagnosis achievements. Firstly, the representative failure modes of large-scale wind turbine bearings are reviewed in detail which can help to understand the causes and effects of the tribological issues of these bearings. Then, condition monitoring and fault diagnosis methods of large-scale wind turbine bearings are presented; within which failure modes, experimental scale and signal processing approaches are summarized. Finally, a number of popular condition monitoring and fault diagnosis approaches that can be potentially used for wind turbine bearings are reviewed, followed by a brief summary of future research directions for wind turbine bearing fault diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines
Polinder, H., Van Der Pijl, F. F. A., De Vilder, G.-J., & Tavner, P. J. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.875476 · Cited by 1,128
Stochastic resonance and sensory information processing: A tutorial and review of application
Moss, F., Ward, L. M., & Sannita, W. G. (2004) · Clinical Neurophysiology · doi:10.1016/j.clinph.2003.09.014 · Cited by 994
The local mean decomposition and its application to EEG perception data
Smith, J. S. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0058 · Cited by 983
A review on data-driven fault severity assessment in rolling bearings
Cerrada, M., Sánchez, R.-V., Li, C., Pacheco, F., Cabrera, D., Valente de Oliveira, J., & Vásquez, R. E. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.012 · Cited by 724
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Rolling bearing fault diagnosis using an optimization deep belief network
Shao, H., Jiang, H., Zhang, X., & Niu, M. (2015) · Measurement Science and Technology · doi:10.1088/0957-0233/26/11/115002 · Cited by 517
Fault diagnosis of wind turbine based on Long Short-term memory networks
Lei, J., Liu, C., & Jiang, D. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.10.031 · Cited by 507
Carneiro, P. A., Umbuzeiro, G. A., Oliveira, D. P., & Zanoni, M. V. B. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.09.106 · Cited by 477
Remaining Useful Life Prediction Based on a Double-Convolutional Neural Network Architecture
Yang, B., Liu, R., & Zio, E. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2924605 · Cited by 429
A review of wind turbine bearing condition monitoring: State of the art and challenges
de Azevedo, H. D. M., Araújo, A. M., & Bouchonneau, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.032 · Cited by 382
Chen, J., Pan, J., Li, Z., Zi, Y., & Chen, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.12.010 · Cited by 361
Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2645238 · Cited by 345
Friction and molecular structure: the behaviour of some thermoplastics
Pooley, C. M., & Tabor, D. (1972) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1972.0112 · Cited by 340
Planetary gearbox fault diagnosis using an adaptive stochastic resonance method
Lei, Y., Han, D., Lin, J., & He, Z. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.06.021 · Cited by 299
Li, C., Sanchez, R.-V., Zurita, G., Cerrada, M., Cabrera, D., & Vásquez, R. E. (2015) · Neurocomputing · doi:10.1016/j.neucom.2015.06.008 · Cited by 295
Qiao, Z., Lei, Y., Lin, J., & Jia, F. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.030 · Cited by 268
Deep convolutional neural network based planet bearing fault classification
Zhao, D., Wang, T., & Chu, F. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.02.001 · Cited by 231
Analyzing bearing faults in wind turbines: A data-mining approach
Kusiak, A., & Verma, A. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.04.020 · Cited by 219
Yang, B., Liu, R., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2662215 · Cited by 218
Liu, R., Yang, B., & Hauptmann, A. G. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915536 · Cited by 204
He, W., Zi, Y., Chen, B., Wu, F. C., & He, Z. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.09.007 · Cited by 202
Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals
Gong, X., & Qiao, W. (2013) · Industrial Electronics, IEEE Transactions on · doi:10.1109/tie.2013.2238871 · Cited by 195
Caesarendra, W., Kosasih, B., Tieu, A. K., Zhu, H., Moodie, C. A. S., & Zhu, Q. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.020 · Cited by 195
EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis
Žvokelj, M., Zupan, S., & Prebil, I. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.046 · Cited by 184
2016 Chinese Control and Decision Conference (CCDC)
(2016) · doi:10.1109/ccdc37849.2016 · Cited by 181
Zimroz, R., Bartelmus, W., Barszcz, T., & Urbanek, J. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.010 · Cited by 174
Wang, J., Peng, Y., & Qiao, W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2571258 · Cited by 173
Mori, K., Kasashima, N., Yoshioka, T., & Ueno, Y. (1996) · Wear · doi:10.1016/0043-1648(95)06817-1 · Cited by 168
Adaptive feature extraction using sparse coding for machinery fault diagnosis
Liu, H., Liu, C., & Huang, Y. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.019 · Cited by 166
Materials Selection and Design
(1997) · ASM International eBooks · doi:10.31399/asm.hb.v20.9781627081948 · Cited by 162
Li, Z., Jiang, Y. S., Guo, Q., Hu, C. K., & Peng, Z. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.12.013 · Cited by 162
Huang, H., Baddour, N., & Liang, M. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.11.005 · Cited by 158
Ali, J. B., Saïdi, L., Harrath, S., Bechhoefer, E. R., & Benbouzid, M. (2017) · Applied Acoustics · doi:10.1016/j.apacoust.2017.11.021 · Cited by 158
Zhao, M. J., Lin, J., Xu, X., & Lei, Y. (2013) · Sensors · doi:10.3390/s130810856 · Cited by 154
Maheswari, R., & Umamaheswari, R. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.07.046 · Cited by 152
Li, J., Zhang, J., Li, M., & Zhang, Y. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.004 · Cited by 146
2012 IEEE Energy Conversion Congress and Exposition (ECCE)
(2012) · doi:10.1109/ecce16988.2012 · Cited by 139
Vibration-based bearing fault detection for operations and maintenance cost reduction in wind energy
Peeters, C., Guillaume, P., & Helsen, J. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.01.056 · Cited by 133
Sparse representation based on parametric impulsive dictionary design for bearing fault diagnosis
Sun, R.-B., Yang, Z.-B., Zhai, Z., & Chen, X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.054 · Cited by 130
Report on Wind Turbine Subsystem Reliability - A Survey of Various Databases
Sheng, S. (2013) · University of North Texas Digital Library (University of North Texas) · Cited by 115
Hu, Y., Tu, X., Li, F., Li, H., & Meng, G. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.08.003 · Cited by 111
Reliability assessment of wind turbine bearing based on the degradation-Hidden-Markov model
Li, J., Zhang, X., Zhou, X., & Lu, L. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.08.048 · Cited by 105
2015 34th Chinese Control Conference (CCC)
(2015) · doi:10.1109/ccc34878.2015 · Cited by 101
Identification of Bearing Defects by Spectral Analysis
Taylor, J. I. (1980) · Journal of Mechanical Design · doi:10.1115/1.3254730 · Cited by 99
Kang, M., Kim, J., & Kim, J.-M. (2014) · Information Sciences · doi:10.1016/j.ins.2014.10.014 · Cited by 90
Amirat, Y., Choqueuse, V., & Benbouzid, M. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.012 · Cited by 87
Hou, F., Chen, J., & Dong, G. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.04.003 · Cited by 87
Sparse Time-Frequency Representation for Incipient Fault Diagnosis of Wind Turbine Drive Train
Yang, B., Liu, R., & Chen, X. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2828739 · Cited by 84
Application of Oil Debris Monitoring For Wind Turbine Gearbox Prognostics and Health Management
Dupuis, R. (2010) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2010.v2i1.1867 · Cited by 81
Chen, X., Xu, W., Liu, Y., & Islam, M. R. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2917418 · Cited by 78
Yaw Systems for wind turbines – Overview of concepts, current challenges and design methods
Kim, M. G., & Dalhoff, P. (2014) · Journal of Physics Conference Series · doi:10.1088/1742-6596/524/1/012086 · Cited by 74
Prognosis of the Remaining Useful Life of Bearings in a Wind Turbine Gearbox
Teng, W., Zhang, X., Liu, Y., Kusiak, A., & Ma, Z. (2016) · Energies · doi:10.3390/en10010032 · Cited by 70
An, X., Jiang, D., Chen, J., & Liu, C. (2011) · Journal of Vibration and Control · doi:10.1177/1077546311403185 · Cited by 68
Feed-axis gearbox condition monitoring using built-in position sensors and EEMD method
Zhou, Y., Tao, T., Mei, X., Jiang, G., & Sun, N. (2011) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2010.12.001 · Cited by 67
Shahriar, M. R., Borghesani, P., & Tan, A. C. C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782240 · Cited by 60
Detection of natural crack in wind turbine gearbox
Shanbr, S., Elasha, F., Elforjani, M., & Teixeira, J. A. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.10.104 · Cited by 52
Li, J., Li, M., Zhang, J., & Jiang, G. (2018) · Measurement · doi:10.1016/j.measurement.2018.10.054 · Cited by 44
Incipient fault detection of wind turbine large-size slewing bearing based on circular domain
Pan, Y., Hong, R., Chen, J., Qin, Z., & Feng, Y. (2019) · Measurement · doi:10.1016/j.measurement.2019.01.033 · Cited by 42
A computer-vision-based rotating speed estimation method for motor bearing fault diagnosis
Wang, X., Guo, J., Lu, S., Shen, C., & He, Q. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa650a · Cited by 40
Zhang, L., & Lang, Z. (2018) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2018.2816738 · Cited by 39
Self-citationZhang, L., Lang, Z., & Papaelias, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2580519 · Cited by 27
Self-citationGuo, J., Lu, S., Zhai, C., & He, Q. (2018) · Measurement Science and Technology · doi:10.1088/1361-6501/aa92d6 · Cited by 25
Incipient bearing fault detection via wind generator stator current and wavelet filter
Gong, X., Qiao, W., & Zhou, W. (2010) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2010.5675135 · Cited by 24
Amirat, Y., Choqueuse, V., & Benbouzid, M. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6389263 · Cited by 22
Pezzani, C. M., Bossio, J. M., Castellino, A., Bossio, G. R., & Angelo, C. H. D. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.010 · Cited by 22
Tacholess order-tracking approach for wind turbine gearbox fault detection
Wang, Y., Xie, Y. G., Xu, G., Zhang, S., & Hou, C. (2017) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-017-0452-z · Cited by 16
Amirat, Y., Benbouzid, M., Wang, T., & Turri, S. (2014) · International Conference on Green Energy (ICGE) · doi:10.1109/icge.2014.6835421 · Cited by 14
A life test method and result analysis for slewing bearings in wind turbines
Zong, H., Wang, H., Tian, S., & Gao, X. (2015) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406215573975 · Cited by 7
Cited by
Badihi, H., Zhang, Y., Jiang, B., Pillay, P., & Rakheja, S. (2022) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3171691 · Cited by 319
A Review on Vibration-Based Condition Monitoring of Rotating Machinery
Tiboni, M., Remino, C., Bussola, R., & Amici, C. (2022) · Applied Sciences · doi:10.3390/app12030972 · Cited by 314
Deep transfer learning with limited data for machinery fault diagnosis
Han, T., Liu, C., Wu, R., & Jiang, D. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107150 · Cited by 268
Ahmad, I., Hee, L. M., Abdelrhman, A. M., Imam, S. A., & Leong, M. S. (2021) · Measurement · doi:10.1016/j.measurement.2021.109856 · Cited by 88
Ewert, P., Orlowska-Kowalska, T., & Jankowska, K. (2021) · Energies · doi:10.3390/en14030712 · Cited by 48
Metadata
- Authors
- Liu, Z., & Zhang, L.
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 149
- Pages
- 107002
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W2971479067
- Cited by
- 535
- References
- 76
- FWCI
- 28.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.