Vibration signal denoising for structural health monitoring by residual convolutional neural networks
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In vibration based structural health monitoring (SHM), measurement noise inevitably exists in the vibration data, which significantly influences the usability and quality of measured vibration signals for structural identification and condition monitoring. As a result, there is a high demand for developing effective methods to reduce noise effect, especially in harsh and extreme environment. This paper proposes a vibration signal denoising approach for SHM based on a specialized Residual Convolutional Neural Networks (ResNet). Dropout, skip connection and sub-pixel shuffling techniques are used to improve the performance. The effectiveness and robustness of this developed approach are validated with acceleration data measured from Guangzhou New TV Tower. The results show that the proposed approach is effective in improving the quality of the acceleration data with varying levels of noises and different types of noises. Modal identifications based on signals contaminated with intensive noise and de-noised signals are conducted. Modal information of weakly excited modes masked by noise and closely spaced modes can be clearly and accurately identified from the de-noised signals, which could not be reliably identified with the original signal, indicating the effectiveness of using this developed approach for SHM. Besides white noise, a group of data contaminated with pink noise, which is not included in the training data, is also tested. Good results are obtained. The developed ResNet extracts high-level features from the vibration signal and learns the modal information of structures automatically, therefore it can well preserve the most important vibration characteristics in vibration signals, and can assist in distinguishing the physical modes from the spurious modes in structural modal identification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SegNet: A Deep Convolutional Encoder-Decoder Architecture for Image Segmentation
Badrinarayanan, V., Kendall, A., & Cipolla, R. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2644615 · Cited by 19,631
(2010) · Journal of Machine Learning Research · doi:10.5555/1756006.1953039 · Cited by 4,051
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Jing, L., Zhao, M., Li, P., & Xu, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.017 · Cited by 698
Structural damage identification based on autoencoder neural networks and deep learning
Pathirage, C. S. N., Li, J., Li, L., Hao, H., Liu, W., & Ni, P. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.109 · Cited by 415
Self-citation
Cited by
Azimi, M., Eslamlou, A., & Pekcan, G. (2020) · Sensors · doi:10.3390/s20102778 · Cited by 769
Malekloo, A., Ozer, E., AlHamaydeh, M., & Girolami, M. (2022) · Structural Health Monitoring · doi:10.1177/14759217211036880 · Cited by 607
“…structural response Fan et al. 90 Impute CNN Recovering lost vibration data Li et al. 91 Impute LSTM Stacked DL-based imputation framework for dams Fan et al. 92 Decimate Residual CNN Denoising SHM vibration data Yang et al. 93 Decimate/Impute 1) Chebyshev inequality Wind turbine 2) SVR Batista…”
BackgroundZhang, C., Mousavi, A. A., Masri, S. F., Gholipour, G., Yan, K., & Li, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109175 · Cited by 395
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
“In this way, we can better understand and use the DL model by explaining the model’s decision-making process, thus promoting its rapid development.”
MethodDas, S., & Saha, P. (2021) · Measurement · doi:10.1016/j.measurement.2020.108533 · Cited by 34
Metadata
- Authors
- Fan, G., Li, J., & Hao, H.
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 157
- Pages
- 107651
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W3007504755
- Cited by
- 154
- References
- 6
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Vibration signal denoising for structural health monitoring by residual convolutional neural networks. https://app.cochat.ai/papers/10.1016/j.measurement.2020.107651
- The paper
- Fan, G., Li, J., & Hao, H. (2020). Vibration signal denoising for structural health monitoring by residual convolutional neural networks. Measurement. https://doi.org/10.1016/j.measurement.2020.107651
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.