The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Fabrication of highly durable and robust superhydrophobic-superoleophilic nanofibrous membranes based on a fluorine-free system for efficient oil/water separation
Abstract
Abstract Developing an effective and energy-efficient oil-water separation technologies for cleaning up or removing of oil contaminants from oily water is highly desired, owing to the frequent occurrence of oil spill accidents and large amounts of oil-containing industrial wastewater emissions. Here, a facile method to fabricate superhydrophobic/superoleophilic membranes based on a fluorine-free system by the combination of electrospun polyimide (PI) nanofibers and a novel in-situ polymerized polybenzoxazine (PBZ) functional containing silica nanoparticles (SNP) is proposed. The resultant PI-based membrane has outstanding superhydrophobicity and superoleophilicity with water and oil contact angles above 154° and approaches 0 °, respectively. Simultaneously, the membrane possesses extraordinary chemical and thermal stability and high salt tolerance. Furthermore, the membrane presents high separation efficiency (above 99%) and high-flux (4798 L m−2 h−1) as well as good reusability and oil content in the filtrate below 5 ppm for separation of various oil/water mixture. Significantly, these studies offer a simple yet cost-effective technique to fabricate superhydrophobic/superoleophilic membranes and have potential use for oily wastewater treatment and oil spill clean-up.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807 · cited 1×
“and results in a small rolling angle [39,40].”
BackgroundRESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316 · cited 1×
“[36,37] In addition, considering the roughness factor (Rf ), the Wenzel model [38] could be expressed as follows:”
MethodThe Developmental Toxicity of Perfluoroalkyl Acids and Their Derivatives
Lau, C., Butenhoff, J. L., & Rogers, J. M. (2004) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2003.11.031 · Cited by 867
Cited by
Biomass derived carbon as binder-free electrode materials for supercapacitors
Wang, Y., Qu, Q., Gao, S., Tang, G., Liu, K., He, S., & Huang, C. (2019) · Carbon · doi:10.1016/j.carbon.2019.09.018 · Cited by 368
Self-citationMa, W., Ding, Y., Zhang, M., Gao, S., Li, Y., Huang, C., & Fu, G. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121476 · Cited by 331
Self-citationAdvanced Materials with Special Wettability toward Intelligent Oily Wastewater Remediation
Zheng, W., Huang, J., Li, S., Ge, M., Teng, L., Chen, Z., & Lai, Y. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18794 · Cited by 318
Taliantzis, K., & Ellinas, K. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103566 · Cited by 83
Metadata
- Authors
- Ma, W., Zhang, M., Liu, Z., Kang, M., Huang, C., & Fu, G.
- Venue
- Journal of Membrane Science
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 570-571
- Pages
- 303-313
- ISSN
- 0376-7388 (ISSN-L)
- OpenAlex
- W2897432357
- Cited by
- 238
- References
- 3
- FWCI
- 10.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication of highly durable and robust superhydrophobic-superoleophilic nanofibrous membranes based on a fluorine-free system for efficient oil/water separation. https://app.cochat.ai/papers/10.1016/j.memsci.2018.10.035
- The paper
- Ma, W., Zhang, M., Liu, Z., Kang, M., Huang, C., & Fu, G. (2019). Fabrication of highly durable and robust superhydrophobic-superoleophilic nanofibrous membranes based on a fluorine-free system for efficient oil/water separation. Journal of Membrane Science. https://doi.org/10.1016/j.memsci.2018.10.035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.