Preparing hierarchical porous carbon aerogels based on enzymatic hydrolysis lignin through ambient drying for supercapacitor electrodes
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Hierarchical porous lignin-based carbon aerogels, synthesized through a low-cost and simple method, are promising for applications in supercapacitor electrodes. Lignin-based carbon aerogels are prepared by pyrolysis and KOH activation of lignin-based aerogels. Lignin-based aerogels are prepared by mixing of enzymatic hydrolysis lignin (L), resorcinol (R) and formaldehyde (F) under the catalysis of Na2CO3 (C) followed by gelation, aging and ambient drying process. The results show that lignin-based carbon aerogels with a L/(L + R) ratio of 20%, exhibit a high specific surface area of 779 m2/g, a large total pore volume of 0.48 cm3/g, and a large micropore volume of 0.29 cm3/g. The obtained lignin-based carbon aerogels exhibit an interconnected, hierarchical porous network structure and a high degree of graphitization, which further contributes to their excellent electrochemical performance as electrodes in supercapacitors. The specific capacitance reaches 142.8 F/g at a current density of 0.5 A/g. Even at a large current density of 10 A/g, the specific capacitance of the CA-L20 electrode remains 112.5 F/g. After 2000 charge/discharge cycles, the specific capacitance still maintains 96% of its initial value, which indicates an excellent durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xu, X., Zhou, J., Nagaraju, D. H., Jiang, L., Marinov, V. R., Lubineau, G., Alshareef, H. N., & Oh, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500538 · Cited by 324
Cited by
Current advancement on the isolation, characterization and application of lignin
Liao, J. J., Latif, N. H. A., Trache, D., Brosse, N., & Hussin, M. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.168 · Cited by 425
Cascade utilization of lignocellulosic biomass to high-value products
Liu, Y., Nie, Y., Lu, X., Zhang, X., He, H., Pan, F., Zhou, L., Liu, X., Ji, X., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c9gc00473d · Cited by 405
Lignin derived carbon materials: current status and future trends
Zhang, W., Qiu, X., Wang, C., Zhong, L., Fu, F., Zhu, J., Zhang, Z., Qin, Y., Yang, D., & Xu, C. C. (2022) · Carbon Research · doi:10.1007/s44246-022-00009-1 · Cited by 296
Chen, Y., Yang, Y., Xiong, Y., Zhang, L., Xu, W., Duan, G., Mei, C., Jiang, S., Rui, Z., & Zhang, K. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101204 · Cited by 258
Li, W., Wang, G., Sui, W., Xu, T., Li, Z., Parvez, A. M., & Si, C. (2022) · Carbon · doi:10.1016/j.carbon.2022.05.053 · Cited by 176
Aerogels: Promising Nanostructured Materials for Energy Conversion and Storage Applications
Alwin, S., & Sahaya Shajan, X. (2020) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-020-00168-4 · Cited by 157
Synthesis of biomass-based carbon aerogels in energy and sustainability
Sam, D. K., Sam, E. K., Durairaj, A., Lv, X., Zhou, Z., & Liu, J. (2020) · Carbohydrate Research · doi:10.1016/j.carres.2020.107986 · Cited by 116
Kobina Sam, D., Kobina Sam, E., & Lv, X. (2020) · ChemElectroChem · doi:10.1002/celc.202000829 · Cited by 89
Carbon Aerogels From Softwood Kraft Lignin for High Performance Supercapacitor Electrodes
Karaaslan, M. A., Lin, L.-T., Ko, F., & Renneckar, S. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.894061 · Cited by 51
“88 Å with increasing lignin content, indicating that the CA-L87 carbon aerogel had higher degree of graphitization and improved stacking structure compared to the CA-L56 (Xu et al., 2018).”
BackgroundInfluentialReview on the preparation and application of lignin-based carbon aerogels
Wu, C.-W., Li, P.-H., Wei, Y.-M., Yang, C., & Wu, W.-J. (2022) · RSC Advances · doi:10.1039/d2ra01402e · Cited by 41
Metadata
- Authors
- Xu, J., Zhou, X., Chen, M., Shi, S., & Cao, Y.
- Venue
- Microporous and Mesoporous Materials
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 265
- Pages
- 258-265
- ISSN
- 1387-1811 (ISSN-L)
- OpenAlex
- W2789260145
- Cited by
- 108
- References
- 1
- FWCI
- 2.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.