Calcium leaching from waste steelmaking slag: Significance of leachate chemistry and effects on slag grain mineralogy
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Accelerated carbonation of alkaline wastes such as steelmaking slag offers the potential to combine waste valorisation with climate change mitigation by utilising carbon dioxide (CO 2 ). One method of achieving this is through an indirect carbonation process to produce a marketable precipitated calcium carbonate (PCC), using ammonium salts to selectively extract calcium from steelmaking slag. Two unaddressed design parameters for a slag based plant differing from that of a traditional PCC plant are the effect of mineralogy on extraction efficiency when using a multicomponent, heterogeneous feed such as slag and the challenges raised by the resulting leachate chemistry. This paper presents petrographic textural observations on the effect of calcium leaching via ammonium chloride on individual grains of dicalcium silicate in three different widely unutilised steelmaking slags. These observations are then interpreted in conjunction with measured changes in solution leachate chemistry. The results indicate that although silica enriched regions form at the reaction front, the reaction continues into the core of the particle due to fracture propagation caused by volume reduction as calcium is extracted. Co-leaching of sulfur alongside calcium and the formation of precipitate in the leachate highlights potential engineering challenges when the process is scaled up due to fouling of process equipment. The main mineral phases in all untreated slags were found to be calcium silicates, predominantly dicalcium silicate (Ca 2 SiO 4 ). This was followed by a complex mixture of calcium/magnesium-wustite (CaFeMnMg)O type phases and srebrodolskite (Ca 2 Fe 2 O 5 (Ti, V)). Results indicate that calcium silicate is the more reactive component of BOS slag, while lime bound as (CaFeMnMg)O is most reactive in HMD and SS slags. Selectivity of the ammonium chloride solvent was high at 95–97% and efficiency of calcium extraction ranged between 25% and 39%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mineral CO 2 Sequestration by Steel Slag Carbonation
Huijgen, W. J. J., Witkamp, G.-J., & Comans, R. N. J. (2005) · Environmental Science & Technology · doi:10.1021/es050795f · Cited by 858
A review of mineral carbonation technology in sequestration of CO2
Olajire, A. A. (2013) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2013.03.013 · Cited by 567
Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution
KODAMA, S., NISHIMOTO, T., YAMAMOTO, N., YOGO, K., & YAMADA, K. (2008) · Energy · doi:10.1016/j.energy.2008.01.005 · Cited by 314
van Zomeren, A., van der Laan, S. R., Kobesen, H. B. A., Huijgen, W. J. J., & Comans, R. N. J. (2011) · Waste Management · doi:10.1016/j.wasman.2011.05.022 · Cited by 168
Mattila, H.-P., Grigaliūnaitė, I., & Zevenhoven, R. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.03.068 · Cited by 72
Cited by
Mo, L., Zhang, F., & Deng, M. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.05.013 · Cited by 358
Negative emissions—Part 3: Innovation and upscaling
Nemet, G. F., Callaghan, M. W., Creutzig, F., Fuss, S., Hartmann, J., Hilaire, J., Lamb, W. F., Minx, J. C., Rogers, S., & Smith, P. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aabff4 · Cited by 343
Luo, Y., & He, D. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15254-x · Cited by 79
Metadata
- Authors
- Hall, C., Large, D. J., Adderley, B., & West, H. M.
- Venue
- Minerals Engineering
- Publisher
- Elsevier BV
- Published
- 2014-10
- Volume
- 65
- Pages
- 156-162
- ISSN
- 0892-6875 (ISSN-L)
- OpenAlex
- W2006881298
- Cited by
- 62
- References
- 5
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.