Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The main goal of this attempt is achieving higher rate of solidification with employing two passive techniques. Mixing the based PCM with nanoparticles and considering the wavy shape for walls were two techniques were incorporated. Copper oxide nanomaterial was dispersed in to water with concentration of 0.04 which let us employing homogeneous model. Based on this fact, empirical formulations were utilized for predicting features of NEPCM and various shapes of nano sized particles were considered in thermal conductivity formula. Due to inherent of solidification phenomena, buoyancy can be ignored and pure conduction mechanism with involving the transient source term of solid faction was solved by means of FEM. During the process, the configurations of grids change and the regions around the solid front have finer grid. This opportunity offers outputs with greater accuracy. As shape factor rises, the greater conduction mode can be obtained and similar behavior can be achieved with considering greater amplitude of wavy walls. The best case in term of discharging time is that of m = 5.7 and A = 0.5 in which 156.17 s required to finish the process. Greater amount of shape factor can decrease the time about 5.91% and 5.89% when A = 0.5 and 0.1, respectively. Also, with growth of A, time reduces about 22.66% which indicate better solidification rate. Inclusion of nanoparticles can improve the discharging rate about 17.9%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elbahjaoui, R., & El Qarnia, H. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.003 · Cited by 95
Bondareva, N. S., Gibanov, N. S., & Sheremet, M. A. (2020) · Nanomaterials · doi:10.3390/nano10020284 · Cited by 46
Cited by
Melting process of nanoparticle enhanced PCM through storage cylinder incorporating fins
Li, F., Almarashi, A., Jafaryar, M., Hajizadeh, M. R., & Chu, Y.-M. (2021) · Powder Technology · doi:10.1016/j.powtec.2020.12.026 · Cited by 184
Self-citationSolidification of PCM within a tank with longitudinal-Y shape fins and CuO nanoparticle
Hajizadeh, M. R., Keshteli, A. N., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114188 · Cited by 76
Self-citation
Metadata
- Authors
- Chu, Y.-M., Yadav, D., Shafee, A., Li, Z., & Bach, Q.-V.
- Venue
- Journal of Molecular Liquids
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 319
- Pages
- 114121
- ISSN
- 0167-7322 (ISSN-L)
- OpenAlex
- W3080899881
- Cited by
- 240
- References
- 2
- FWCI
- 24.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study. https://app.cochat.ai/papers/10.1016/j.molliq.2020.114121
- The paper
- Chu, Y.-M., Yadav, D., Shafee, A., Li, Z., & Bach, Q.-V. (2020). Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study. Journal of Molecular Liquids. https://doi.org/10.1016/j.molliq.2020.114121
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.