The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Computational Study of Heat Transfer inside Different PCMs Enhanced by Al2O3 Nanoparticles in a Copper Heat Sink at High Heat Loads
Open accessAbstract
The cooling of electronic elements is one of the most important problems in the development of architecture in electronic technology. One promising developing cooling method is heat sinks based on the phase change materials (PCMs) enhanced by nano-sized solid particles. In this paper, the influence of the PCM’s physical properties and the concentration of nanoparticles on heat and mass transfer inside a closed radiator with fins, in the presence of a source of constant volumetric heat generation, is analyzed. The conjugate problem of nano-enhanced phase change materials (NePCMs) melting is considered, taking into account natural convection in the melt under the impact of the external convective cooling. A two-dimensional problem is formulated in the non-primitive variables, such as stream function and vorticity. A single-phase nano-liquid model is employed to describe the transport within NePCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Comparison of obtained numerical data (solid line) and experimental data (dots) [29].](https://figures.cochat.ai/paper-figures/504d915e611544d9bc0f2abe4289ee8b/computational-study-of-heat-transfer-inside-different-pcms-enhanced-by-al2o3-figure-2.jpg)








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The lauric acid had the lowest temperature heat sink after four minutes, making it the best choice.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“NPs reduced latent heat, accelerated the melting process, and reduced the overall heat capacity.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“As a result of this, NPs only enhanced the system up to 2% concentration, which was determined to be the best concentration [80].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“Since n-octadecane has the lowest melting point, it started melting first; however, since it melted quickly, it only cooled for a short amount of time.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“NPs enhanced up to 2% concentration”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,090
A new thermal conductivity model for nanofluids
Koo, J., & Kleinstreuer, C. (2004) · Journal of Nanoparticle Research · doi:10.1007/s11051-004-3170-5 · Cited by 1,052 · cited 1×
“In this study, the thermal conductivity model [39] for nanofluids, which takes into account the influence of particle size, concentration, and base fluid properties, was used.”
MethodVajjha, R. S., & Das, D. K. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.06.027 · Cited by 908 · cited 2×
“In [40], the new empirical correlations for β and f(T,Φ) were obtained experimentally considering nanoparticles of Al2O3, ZnO, and CuO.”
MethodMelting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655 · cited 2×
“Comparison of obtained numerical data (solid line) and experimental data (dots) [29].”
BackgroundResultExperimental study of using PCM in brick constructive solutions for passive cooling
Castell, A., Martorell, I., Medrano, M., Pérez, G., & Cabeza, L. F. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2009.10.022 · Cited by 549
Increasing the efficiency of PV panel with the use of PCM
Stropnik, R., & Stritih, U. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.06.011 · Cited by 467
Vajjha, R. S., Das, D. K., & Namburu, P. K. (2010) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2010.02.016 · Cited by 432
Leong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Hosseinizadeh, S. F., Tan, F. L., & Moosania, S. M. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.07.031 · Cited by 336 · cited 1×
“Aluminum oxide (nanoparticles) (d = 59 × 10−9 m) [34] 36 765 3600 7.”
Lee, K. O., Medina, M. A., Raith, E., & Sun, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.003 · Cited by 318
Cited by
Chu, Y.-M., Yadav, D., Shafee, A., Li, Z., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114121 · Cited by 240
Improving solar cooker performance using phase change materials: A comprehensive review
Omara, A. A. M., Abuelnuor, A. A. A., Mohammed, H. A., Habibi, D., & Younis, O. (2020) · Solar Energy · doi:10.1016/j.solener.2020.07.015 · Cited by 128
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“As a result of this, NPs only enhanced the system up to 2% concentration, which was determined to be the best concentration [80].”
BackgroundMethodInfluentialMaleki, H., Ashrafi, M., Ilghani, N. Z., Goodarzi, M., & Muhammad, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103310 · Cited by 97
Korti, A. I. N., & Guellil, H. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101726 · Cited by 91
Metadata
- Authors
- Bondareva, N. S., Gibanov, N. S., & Sheremet, M. A.
- Affiliations
- National Research Tomsk State University (RU)
- Laboratory on Convective Heat and Mass Transfer, Tomsk State University, Tomsk 634050, Russia
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2020-02-07
- Volume
- 10
- Issue
- 2
- Pages
- 284
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC7075241
- OpenAlex
- W3004691320
- Cited by
- 46
- References
- 41
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 4 · 2023: 5 · 2022: 8 · 2021: 13 · 2020: 7
- FWCI
- 4.06
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- the Grants Council (under the President of the Russian Federation (MK-1934.2019.1)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Nanofluid Flow and Heat Transfer
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- phase change materials, Al2O3 nanoparticles, copper heat sink, electronics cooling, melting, natural convection, nanoparticle concentration, conjugate heat transfer, stream function-vorticity formulation, high heat load
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Computational Study of Heat Transfer inside Different PCMs Enhanced by Al2O3 Nanoparticles in a Copper Heat Sink at High Heat Loads. https://app.cochat.ai/papers/10.3390/nano10020284
- The paper
- Bondareva, N. S., Gibanov, N. S., & Sheremet, M. A. (2020). Computational Study of Heat Transfer inside Different PCMs Enhanced by Al2O3 Nanoparticles in a Copper Heat Sink at High Heat Loads. Nanomaterials. https://doi.org/10.3390/nano10020284
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.