Cited by 189biodegradable polymer synthesis and propertiesHydrogels: synthesis, properties, applicationsPolymer composites and self-healing

The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.

Synthesis and characterization of biodegradable polyurethane films based on HDI with hydrolyzable crosslinked bonds and a homogeneous structure for biomedical applications

Barrioni, Breno Rocha, de Carvalho, Sandhra Maria, Oréfice, Rodrigo Lambert, de Oliveira, Agda Aline Rocha, Pereira, Marivalda de Magalhães·2015·Materials Science and Engineering: C

DOI 10.1016/j.msec.2015.03.027

Open this paper in CoChat — free account

Abstract

Synthetic biodegradable polymers are considered strategic in the biomaterials field and are used in various applications. Among the polymers used as biomaterials, polyurethanes (PUs) feature prominently due to their versatility and the ability to obtain products with a wide range of physical and mechanical properties. In this work, new biodegradable polyurethane films were developed based on hexamethylene diisocyanate (HDI) and glycerol as the hard segment (HS), and poly(caprolactone) triol (PCL triol) and low-molecular-weight poly(ethylene glycol) PEG as the soft segment (SS) without the use of a catalyst. The films obtained were characterized by structural, mechanical and biological testing. A highly connected network with a homogeneous PU structure was obtained due to crosslinked bonds. The films showed amorphous structures, high water uptake, hydrogel behavior, and susceptibility to hydrolytic degradation. Mechanical tests indicated that the films reached a high deformation at break of up to 425.4%, an elastic modulus of 1.6 MPa and a tensile strength of 3.6 MPa. The materials presented a moderate toxic effect on MTT assay and can be considered potential materials for biomedical applications.

Integrity signals

Registry

Crossref · 10.1016/j.msec.2015.03.027

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,873
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765
Sterilization, toxicity, biocompatibility and clinical applications of polylactic acid/ polyglycolic acid copolymers
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Synthesis methods, chemical structures and phase structures of linear polyurethanes. Properties and applications of linear polyurethanes in polyurethane elastomers, copolymers and ionomers
Król, P. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.11.001 · Cited by 959
Polymeric biomaterials for tissue and organ regeneration
Seal, B. L. (2001) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(01)00035-3 · Cited by 903
Understanding the biodegradation of polyurethanes: from classical implants to tissue engineering materials
Santerre, J. P., Woodhouse, K., Laroche, G., & Labow, R. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.079 · Cited by 718
A novel degradable polycaprolactone networks for tissue engineering
Kweon, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 694
A review on biodegradable polymeric materials for bone tissue engineering applications
Sabir, M. I., Xu, X., & Li, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3770-7 · Cited by 656
Polymer/bioactive glass nanocomposites for biomedical applications: A review
Boccaccini, A. R., Erol, M., Stark, W. J., Mohn, D., Hong, Z., & Mano, J. F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.002 · Cited by 519
Characterization of polyurethane resins by FTIR, TGA, and XRD
Trovati, G., Sanches, E. A., Neto, S. C., et al. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31096 · Cited by 513
Biodegradable Polyurethanes: Synthesis and Applications in Regenerative Medicine
Guelcher, S. A. (2008) · Tissue Engineering Part B Reviews · doi:10.1089/teb.2007.0133 · Cited by 470
Properties of polyether-polyurethane block copolymers: effects of hard segment length distribution
Miller, J. A., Lin, S. B., Hwang, K. K. S., et al. (1985) · Macromolecules · doi:10.1021/ma00143a005 · Cited by 375
Surface modification of ultra thin poly (ε-caprolactone) films using acrylic acid and collagen
Cheng, Z., & Teoh, S. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.038 · Cited by 359
Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility
Zhao, K., Deng, Y., Chen, J. C., & Chen, G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00426-x · Cited by 318
Polyurethane-based drug delivery systems
Cherng, J., Hou, T. Y., Shih, M. F., Talsma, H., & Hennink, W. E. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.04.063 · Cited by 283
Thermoplastic biodegradable polyurethanes: The effect of chain extender structure on properties and in-vitro degradation
Tatai, L., Moore, T., Adhikari, R., Malherbe, F., Jayasekara, R., Griffiths, I., & Gunatillake, P. A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.035 · Cited by 267
Synthesis, preparation, in vitro degradation, and application of novel degradable bioelastomers—A review
Liu, Q., Jiang, L., Shi, R., & Zhang, L. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.001 · Cited by 207
Synthesis of biocompatible segmented polyurethanes from aliphatic diisocyanates and diurea diol chain extenders
Guelcher, S. A., Gallagher, K. M., Didier, J. E., Klinedinst, D. B., Doctor, J. S., Goldstein, A. S., Wilkes, G. L., Beckman, E. J., & Hollinger, J. O. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.02.007 · Cited by 189
Characterization of waterborne polyurethane adhesives containing different amounts of ionic groups
Pérez‐Limiñana, M. A., Arán‐Aís, F., Torró‐Palau, A. M., et al. (2005) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2005.02.002 · Cited by 188
Synthesis and characterization of PCL/PEG/PCL triblock copolymers by using calcium catalyst
Piao, L., Dai, Z., Deng, M., Chen, X., & Jing, X. (2003) · Polymer · doi:10.1016/s0032-3861(03)00087-9 · Cited by 178
Novel polycarbonate-based polyurethane elastomers: Composition–property relationship
Špírková, M., Pavličević, J., Strachota, A., et al. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.01.001 · Cited by 175
Effects of crosslinking on thermal and mechanical properties of polyurethanes
Chiou, B., & Schoen, P. E. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.10056 · Cited by 172
Synthesis and water-swelling of thermo-responsive poly(ester urethane)s containing poly(ε-caprolactone), poly(ethylene glycol) and poly(propylene glycol)
Loh, X. J., Sng, K. B. C., & Li, J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.015 · Cited by 166
Morphology control of segmented polyurethanes by crystallization of hard and soft segments
Hood, M. A., Wang, B., Sands, J. M., Scala, J. J. L., Beyer, F. L., & Li, C. Y. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.027 · Cited by 155
Degradation studies on segmented polyurethanes prepared with HMDI, PCL and different chain extenders
Chan‐Chan, L. H., Solís-Correa, R. E., Vargas‐Coronado, R. F., Cervantes‐Uc, J. M., Cauich-Rodríguez, J. V., Quintana, P., & Bartolo-Pérez, P. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.010 · Cited by 145
Biodegradation and in vivo biocompatibility of a degradable, polar/hydrophobic/ionic polyurethane for tissue engineering applications
McBane, J. E., Sharifpoor, S., Cai, K., Labow, R. S., & Santerre, J. P. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.04.048 · Cited by 140
The in vitro hydrolysis of poly(ester urethane)s consisting of poly[(R)-3-hydroxybutyrate] and poly(ethylene glycol)
Loh, X. J., Tan, K. K., Xu, L., & Li, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.038 · Cited by 130
Hydrolytic degradation of segmented polyurethane copolymers for biomedical applications
Mondal, S., & Martin, D. J. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.008 · Cited by 125
Gas separation properties of poly(ethylene glycol)/poly(tetramethylene glycol) based polyurethane membranes
Talakesh, M. M., Sadeghi, M., Chenar, M. P., et al. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.05.033 · Cited by 122
Chitosan membranes containing micro or nano-size bioactive glass particles: evolution of biomineralization followed by in situ dynamic mechanical analysis
Caridade, S. G., Merino, E. G., Alves, N. M., et al. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.11.012 · Cited by 110
Biodegradation of polyurethanes and nanocomposites to non-cytotoxic degradation products
da Silva, G. R., Silva‐Cunha, A., Béhar‐Cohen, F., Ayres, E., & Oréfice, R. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.001 · Cited by 102
Self-citation
Optimization of the structure of polyurethanes for bone tissue engineering applications
Bil, M., Ryszkowska, J., Woźniak, P. A., Kurzydłowski, K. J., & Lewandowska-Szumieł, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.037 · Cited by 92
Thermal volatilisation analysis of TDI-based flexible polyurethane foam
Allan, D., Daly, J. H., & Liggat, J. J. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.002 · Cited by 83
Polyurethane elastomers with amide chain extenders of uniform length
van der Schuur, M., Noordover, B. A. J., & Gaymans, R. J. (2006) · Polymer · doi:10.1016/j.polymer.2005.11.074 · Cited by 78
Degradation of Polyurethanes for Cardiovascular Applications
Juan, V., Lerma, H., Hernández‐Sánchez, F., & José, M. (2013) · InTech eBooks · doi:10.5772/53681 · Cited by 76
Thermal degradation and stability of HTPB-based polyurethane and polyurethaneureas
Gupta, T., & Adhikari, B. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(02)00571-3 · Cited by 76
Preparation and tunable temperature sensitivity of biodegradable polyurethane nanoassemblies from diisocyanate and poly(ethylene glycol)
Fu, H., Gao, H., Wu, G., Wang, Y., Fan, Y., & Ma, J. (2011) · Soft Matter · doi:10.1039/c0sm01350a · Cited by 73
Thermosensitive Transparent Semi-Interpenetrating Polymer Networks for Wound Dressing and Cell Adhesion Control
Thatiparti, T. R., Kano, A., Maruyama, A., Hadano, M., & Takahara, A. (2008) · Biomacromolecules · doi:10.1021/bm701390f · Cited by 73
Evaluation of the zein/inorganics composite on biocompatibility and osteoblastic differentiation
Qu, Z., Wang, H., Tang, T., et al. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.006 · Cited by 71
Phase structure and thermal stability of crosslinked polyurethane elastomers based on well‐defined prepolymers
Król, P., & Pilch‐Pitera, B. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25011 · Cited by 71
Toxicity of Medical Glove Materials: A Pilot Study
Lönnroth, E. (2005) · International Journal of Occupational Safety and Ergonomics · doi:10.1080/10803548.2005.11076642 · Cited by 66
New thermoplastic poly(thiourethane-urethane) elastomers based on hexane-1,6-diyl diisocyanate (HDI)
Rogulska, M., Kultys, A., & Olszewska, E. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3007-5 · Cited by 60
Biodegradable polyurethane nanocomposites containing dexamethasone for ocular route
da Silva, G. R., Silva‐Cunha, A., Béhar‐Cohen, F., et al. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.10.019 · Cited by 60
The effect of chain extenders structure on properties of new polyurethane elastomers
Oprea, Ș. (2010) · Polymer Bulletin · doi:10.1007/s00289-009-0242-9 · Cited by 58
In Vitro Hydrolytic Surface Degradation of Poly(glycolic acid): Role of the Surface Segregated Amorphous Region in the Induction Period of Bulk Erosion
Lee, J.-W., & Gardella, J. A. J. (2001) · Macromolecules · doi:10.1021/ma0022351 · Cited by 54
Modeling stable free-radical polymerization
Zhu, S. (1999) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19990915)37:18 · Cited by 53
Tissue response to poly(l-lactic acid)-based blend with phospholipid polymer for biodegradable cardiovascular stents
Kim, H., Ishihara, K., Lee, S., Seo, J., Kim, H. Y., Suh, D., Kim, M. U., Konno, T., Takai, M., & Seo, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.11.067 · Cited by 49
Assessing the progress of degradation in polyurethanes by chemiluminescence and thermal analysis. II. Flexible polyether- and polyester-type polyurethane foams
Rychlý, J., Lattuati‐Derieux, A., Lavédrine, B., et al. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.012 · Cited by 44
Development of biodegradable polyurethane and bioactive glass nanoparticles scaffolds for bone tissue engineering applications
de Oliveira, A. A. R., Carvalho, S. M., Leite, M. F., Oréfice, R. L., & Pereira, M. M. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32710 · Cited by 44
Self-citation
Cytotoxicity of liquids and powders of chemically different dental materials evaluated using dimethylthiazol diphenyltetrazolium and neutral red tests
Lönnroth, E., & Dahl, J. E. (2003) · Acta Odontologica Scandinavica · doi:10.1080/ode.61.1.52.56 · Cited by 41
Biodegradable polyurethane elastomers prepared from isocyanate‐terminated poly(ethylene adipate), castor oil, and glycerol
Teramoto, N., Saitoh, Y., Takahashi, A., et al. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30019 · Cited by 36
Novel Physically Crosslinked Polyurethane‐block‐Poly(vinyl pyrrolidone) Hydrogel Biomaterials
Patel, A. C., & Mequanint, K. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600272 · Cited by 34
Surface biocompatible modification of polyurethane by entrapment of a macromolecular modifier
Zhang, Q., Liu, Y., Chen, K. C., Zhang, G., Shi, X.-H., & Chen, H. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.07.037 · Cited by 29
Fabrication of polycaprolactone scaffolds using a sacrificial compression‐molding process
Yao, D., Smith, A. G., Nagarajan, P., Vasquez, A., Dang, L., & Chaudhry, G. R. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30419 · Cited by 29
Synthesis, characterization, and thermal properties of biodegradable polyetheresteramide-based polyurethane
Jia, W., Liu, C., Yang, L., et al. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.03.089 · Cited by 23
Degradation of crosslinked poly(ester‐urethanes) elastomers in distilled water: Influence of hard segment
Oprea, Ș. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35196 · Cited by 21
Using the Nanostructure of Segmented Polyurethanes as a Template in the Fabrication of Nanocomposites
Oréfice, R. L., Ayres, E., Pereira, M. M., & Mansur, H. S. (2005) · Macromolecules · doi:10.1021/ma050213e · Cited by 13
Self-citation
Synthesis and characterization of biodegradable polyurethanes based on L ‐cystine/cysteine and poly(ϵ‐caprolactone)
Wang, J., Zheng, Z., Wang, Q., Du, P., Shi, J., & Wang, X. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38613 · Cited by 12
Thermal Properties and Morphology of Poly(3‐Hydroxybutyrate‐co‐3‐Hydroxyvalerate) with Poly(Caprolactone Triol) Mixtures
Miranda, K. W., Nishida, M. H., Silva, J. V., et al. (2006) · Macromolecular Symposia · doi:10.1002/masy.200651322 · Cited by 7

Research works printed but not linked: 1

Yuan, 2013, vol. 51

Sorted by citations

Climbing-inspired twining electrodes using shape memory for peripheral nerve stimulation and recording
Zhang, Y., Zheng, N., Cao, Y., Wang, F., Wang, P., Ma, Y., Lu, B., Hou, G., Fang, Z., Liang, Z., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw1066 · Cited by 314

See all 189

Authors: Barrioni, B. R., de Carvalho, S. M., Oréfice, R. L., de Oliveira, A. A. R., & Pereira, M. D. M.
Affiliations: Universidade Federal de Minas Gerais (BR)
Corresponding author: Barrioni, Breno Rocha
ORCID: Barrioni, Breno Rocha
Oréfice, Rodrigo Lambert
Venue: Materials Science and Engineering: C
Publisher: Elsevier BV
Published: 2015-07
Volume: 52
Pages: 22-30
ISSN: 0928-4931 (ISSN-L)
DOI: 10.1016/j.msec.2015.03.027
OpenAlex: W2035638395
Cited by: 189
References: 59
Citations by year: 2026: 7 · 2025: 19 · 2024: 18 · 2023: 9 · 2022: 16 · 2021: 19 · 2020: 20 · 2019: 17 · 2018: 23 · 2017: 23 · 2016: 15 · 2015: 3
FWCI: 7.73
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Materials Science and Engineering C (publishedVersion)
PubMed (publishedVersion)
Funders: CNPq
CAPES
FAPEMIG/Brazil
Topics: Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
Keywords: hexamethylene diisocyanate, hydrolytic degradation, water absorption, mechanical properties, cytotoxicity, biomedical materials
MeSH terms: Materials Testing, Polyurethanes, Water, Hydrogel, Polyethylene Glycol Dimethacrylate

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Synthesis and characterization of biodegradable polyurethane films based on HDI with hydrolyzable crosslinked bonds and a homogeneous structure for biomedical applications

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks