The DOI matches its Crossref record.
High-entropy alloys and metallic nanocomposites: Processing challenges, microstructure development and property enhancement
Abstract
Abstract Two classes of new materials, i.e. high entropy alloys (HEAs) and metallic nanocomposites offer processing related challenges, while showing significant promise for an array of technological applications requiring wear and irradiation resistance. This review addresses those challenges together with microstructure-property correlations. In particular, the main focus of this review is to demonstrate the efficacy of the superfast densification route, i.e., spark plasma sintering (SPS) as an effective consolidation route for these two classes of materials. To start with, this review will critically analyze the influence of conventional solidification on the microstructure and property of Cu-based bearing alloys. Using nanocrystalline Cu-Pb and Cu-Pb-TiB 2 , Cu-Pb-cBN (cubic boron nitride) as model systems, various aspect of the microstructure-property correlation and enhancement of the tribological properties will be highlighted. A thorough understanding of the processing related issues and stability of the nanoscale/ultrafine microstructure obtained via SPS will be illustrated. A significant part of this review will further discuss the development of novel nanostructured HEAs and HEA-based composites for wear and irradiation resistance applications. The efficacy of SPS route to prepare bulk HEAs with high sinter density will be demonstrated, together with property enhancement in single phase and two-phase HEAs. HEA-based nanocomposites containing soft metallic dispersoids (Bi, Pb, Ag) and ceramic lubricating phases (MoS 2 , CaF 2 /BaF 2 ) for wear resistance application will be highlighted. Finally, oxide dispersed and refractory HEAs via MASPS route for irradiation resistance application will be discussed to elucidate the effective usage of the design and development of HEAs for technologically critical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization
Nellaiappan, S., Katiyar, N. K., Kumar, R., Parui, A., Malviya, K. D., Pradeep, K. G., Singh, A. K., Sharma, S., Tiwary, C. S., & Biswas, K. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04302 · Cited by 447
Self-citationA review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Metadata
- Authors
- Sharma, A. S., Yadav, S., Biswas, K., & Basu, B.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 131
- Pages
- 1-42
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W2808785732
- Cited by
- 205
- References
- 0
- FWCI
- 10.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-entropy alloys and metallic nanocomposites: Processing challenges, microstructure development and property enhancement. https://app.cochat.ai/papers/10.1016/j.mser.2018.04.003
- The paper
- Sharma, A. S., Yadav, S., Biswas, K., & Basu, B. (2018). High-entropy alloys and metallic nanocomposites: Processing challenges, microstructure development and property enhancement. Materials Science and Engineering: R: Reports. https://doi.org/10.1016/j.mser.2018.04.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.