The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
Supercritical fluids in separation and purification: A review
Open accessAbstract
The properties of the supercritical fluid near the critical point can be changed by varying the pressure and temperature, allowing selective and faster extraction. Supercritical fluids exhibit liquid-like density and gas – like viscosity & diffusion coefficients and can penetrate more into the solid matrix inaccessible to liquids due to negligible surface tension and viscosity. They are suitable as a substitute for organic solvents in a range of industrial and laboratory processes. These properties of supercritical fluids are well suited for the extraction of solutes, from various plants, fruits, flowers, seeds, leaves, which cannot be easily extracted using conventional extraction processes. In view of above mentioned advantages, supercritical fluid extraction is becoming increasingly popular in many industries such as petroleum, chemical, food, and perfumery. Supercritical fluids are also used for the extraction of metal ions from aqueous solutions and solid and liquid matrices. This review paper provides a concise review of the applications of supercritical fluids from the perspective of feed materials, type of supercritical fluids, co solvents and modifiers used, nature of work, operating conditions, findings, limitations of the work done and scope for further research. The application of supercritical fluids in extraction and purification of various natural extracts and others, using CO 2 accounts for more than 90% of the published research in the field of supercritical fluid technology. Other supercritical fluids being used are propane, hexane and butane. Carbon dioxide is a relatively non-polar solvent but has some limited affinity with polar molecules due to its large molecular quadrupole. Co-solvents and modifiers are often be added to improve the solubility of polar molecules. On addition of various co solvents and modifier such as isopropyl alcohol and ethanol, n -hexane, heptane, pentane, toluene, methanol, acetone, formic acid with ammonium formate in methanol etc enhances the performance of supercritical extraction process. Despite this, the status of supercritical fluid technology commercialization is less than satisfactory. A review studies revealed that most of the published research is at laboratory scale with little or no information on scale up and design strategies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oil extraction from microalgae for biodiesel production
Halim, R., Gladman, B., Danquah, M. K., & Webley, P. A. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.136 · Cited by 683
Khaw, K.-Y., Parat, M.-O., Shaw, P. N., & Falconer, J. R. (2017) · Molecules · doi:10.3390/molecules22071186 · Cited by 529
Natural Extracts Using Supercritical Carbon Dioxide
Mukhopadhyay, M. (2000) · CRC Press eBooks · doi:10.1201/9781420041699 · Cited by 499
Supercritical Fluid Applications: Industrial Developments and Economic Issues
Perrut, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000211c · Cited by 397
Supercritical fluid chromatography for the 21st century
Taylor, L. T. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.09.012 · Cited by 298
Perspectives on supercritical fluid processing of fats and oils
Temelli, F. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.014 · Cited by 280
Andrade, K. S., Gonçalvez, R. T., Maraschin, M., Ribeiro-do-Valle, R. M., Martínez, J., & Ferreira, S. R. S. (2012) · Talanta · doi:10.1016/j.talanta.2011.11.031 · Cited by 249
Supercritical Fluid Chromatography and Extraction
Chester, T. L., Pinkston, J. D., & Raynie, D. E. (1994) · Analytical Chemistry · doi:10.1021/ac00084a006 · Cited by 231
Supercritical extraction of sunflower oil: A central composite design for extraction variables
Rai, A., Mohanty, B., & Bhargava, R. (2016) · Food Chemistry · doi:10.1016/j.foodchem.2015.07.070 · Cited by 212
Modeling and simulation of the supercritical CO2 extraction of vegetable oils
Reverchon, E., & Marrone, C. (2001) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(00)00093-0 · Cited by 207
Cited by
Chemat, F., Abert Vian, M., Ravi, H. K., Khadhraoui, B., Hilali, S., Perino, S., & Fabiano Tixier, A.-S. (2019) · Molecules · doi:10.3390/molecules24163007 · Cited by 640
Recent advances on protein separation and purification methods
Liu, S., Li, Z., Yu, B., Wang, S., Shen, Y., & Cong, H. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102254 · Cited by 275
Kekessie, I., Wegner, K., Martinez, I., Kopach, M. E., White, T. D., Tom, J. K., Kenworthy, M. N., Gallou, F., Lopez, J., Koenig, S. G., et al. (2024) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.3c01494 · Cited by 149
A review on the promising fuel of the future – Biobutanol; the hindrances and future perspectives
Liu, Y., Yuan, Y., Ramya, G., Mohan Singh, S., Thuy Lan Chi, N., Pugazhendhi, A., Xia, C., & Mathimani, T. (2022) · Fuel · doi:10.1016/j.fuel.2022.125166 · Cited by 84
Metadata
- Authors
- Manjare, S. D., & Dhingra, K.
- Venue
- Materials Science for Energy Technologies
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 2
- Issue
- 3
- Pages
- 463-484
- ISSN
- 2589-2991 (ISSN-L)
- OpenAlex
- W2947980067
- Cited by
- 280
- References
- 116
- FWCI
- 8.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Supercritical fluids in separation and purification: A review. https://app.cochat.ai/papers/10.1016/j.mset.2019.04.005
- The paper
- Manjare, S. D., & Dhingra, K. (2019). Supercritical fluids in separation and purification: A review. Materials Science for Energy Technologies. https://doi.org/10.1016/j.mset.2019.04.005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.