CoChat

Trapping phenomena and degradation mechanisms in GaN-based power HEMTs

Open access
Meneghini, Matteo, Tajalli, Alaleh, Moens, Peter, Banerjee, Abhishek, Zanoni, Enrico, Meneghesso, Gaudenzio · 2018 · Materials Science in Semiconductor Processing
Cited by 124

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

This paper reports an overview of the most relevant trapping and degradation mechanisms that limit the performance and lifetime of GaN-based transistors for application in power electronics. Results obtained on state-of-the-art devices are described and discussed throughout the paper, with the aim of providing a clear description of the topic. The first part of the paper deals with the issue of dynamic-Ron: after describing a robust test strategy for the analysis of the pulsed characteristics of the devices, we discuss the voltage- and temperature-dependent pulsed I-V characteristics of 650 V-rated transistors, and the physical origin of dynamic Ron in these devices. The results demonstrate that through proper buffer optimization it is possible to reach negligible trapping at high voltage. The properties of the traps responsible for dynamic-Ron are also discussed in detail in the paper, based on drain-current transient data. A specific discussion is devoted to hot-electron trapping processes, that – under hard switching conditions – may lead to significant modifications in the resistance of the 2DEG. The second part of the paper deals with device degradation: based on a wide set of experimental results, we describe the physical mechanisms responsible for the worsening of the properties of the devices. More specifically, we demonstrate that stress in off-state conditions may result in measurable changes in the pinch-off voltage, mostly consisting in a negative-threshold instability (NBTI). The origin of this shift is discussed in detail; we also demonstrate that in a real-life cascode configuration (where a low, subthreshold leakage current flows through the device in the off-state), NBTI effects are mitigated. Finally, we discuss the stability of the gate-stack, induced by the exposure to positive gate bias.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.mssp.2017.10.009

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 124

Metadata

Authors
Meneghini, M., Tajalli, A., Moens, P., Banerjee, A., Zanoni, E., & Meneghesso, G.
Venue
Materials Science in Semiconductor Processing
Publisher
Elsevier BV
Published
2018-05
Volume
78
Pages
118-126
ISSN
1369-8001 (ISSN-L)
OpenAlex
W2766877743
Cited by
124
References
2
FWCI
6.21
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.