The DOI matches its Crossref record.
Improved dielectric, tensile and energy storage properties of surface rubberized BaTiO3/polypropylene nanocomposites
Abstract
The low permittivity of the polypropylene (PP) film has become a barrier for the further development of film capacitors with high energy storage density. An advanced strategy of the high-permittivity filler/polymer nanocomposite turns out to be a promising way of solving this problem. In this work, we coated ethylene propylene diene monomer (EPDM) as the shell on the surfaces of BaTiO3 successfully to fabricate core-shell structural nanoparticles. The addition of surface rubberized BaTiO3 into PP matrix promotes the permittivity to about 5.8, while the dielectric loss is barely changed as compared with PP itself. In addition, the elongation at break is as high as 364%, which is over 4 times higher than that of PP. The influences of shell thickness (3 nm, 5 nm and 7 nm) for the nanoparticles and hot-stretching process for the nanocomposite films were also carefully investigated, both of which greatly affected the properties of nanocomposites. Finally, the optimum breakdown strength as high as 370 MV/m is obtained, leading to a maximum energy density of 3.06 J/cm3, which can be attributed to both high breakdown strength and high permittivity of the core-shell structural BaTiO3/PP nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Self-citationPolymer nanocomposite dielectrics for capacitive energy storage
Yang, M., Guo, M., Xu, E., Ren, W., Wang, D., Li, S., Zhang, S., Nan, C.-W., & Shen, Y. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01541-w · Cited by 423
Soft, tough, and fast polyacrylate dielectric elastomer for non-magnetic motor
Yin, L.-J., Zhao, Y., Zhu, J., Yang, M., Zhao, H., Pei, J.-Y., Zhong, S.-L., & Dang, Z.-M. (2021) · Nature Communications · doi:10.1038/s41467-021-24851-w · Cited by 224
Self-citation
Metadata
- Authors
- Zheng, M.-S., Zheng, Y.-T., Zha, J.-W., Yang, Y., Han, P., Wen, Y.-Q., & Dang, Z.-M.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 48
- Pages
- 144-151
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2797452971
- Cited by
- 238
- References
- 0
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improved dielectric, tensile and energy storage properties of surface rubberized BaTiO3/polypropylene nanocomposites. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.03.049
- The paper
- Zheng, M.-S., Zheng, Y.-T., Zha, J.-W., Yang, Y., Han, P., Wen, Y.-Q., & Dang, Z.-M. (2018). Improved dielectric, tensile and energy storage properties of surface rubberized BaTiO3/polypropylene nanocomposites. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.03.049
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.