The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%
Abstract
Abstract Due to its super thermal stability, inorganic CsPbI2Br perovskite has attracted more and more attention in the field of photovoltaic application. However, its device performance, as reported to date, is greatly challenged in preparing CsPbI2Br films with both sufficient absorbance and high quality. Herein, crystallization engineering is applied in producing solution-processed CsPbI2Br film to guarantee sufficient light harvesting and effective carrier extraction. Further study proves that the precursor solution temperature would largely affect the crystallization progress: (1) the nucleation step is highly related to the solubility of precursor in a specific solvent or solvents at elevated temperatures; (2) the crystal growth rate is highly related to the solvent evaporation rate. To obtain thick film with larger crystalline grain size, the precursor solution temperature should be carefully adjusted for both suppressing the formation of too many nuclei and increasing the crystallization rate at the same time. Finally, the optimized CsPbI2Br would be obtained when the precursor solution is maintained at 100 °C, the corresponding device shows a stabilized efficiency as high as 14.81%. As far as we know, this is the highest PCE for the CsPbBrI2 perovskite based solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Cited by
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
14.1% CsPbI3 Perovskite Quantum Dot Solar Cells via Cesium Cation Passivation
Ling, X., Zhou, S., Yuan, J., Shi, J., Qian, Y., Larson, B. W., Zhao, Q., Qin, C., Li, F., Shi, G., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900721 · Cited by 343
Perovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?
Miyasaka, T., Kulkarni, A., Kim, G. M., Öz, S., & Jena, A. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902500 · Cited by 293
Stability of all-inorganic perovskite solar cells
Ouedraogo, N. A. N., Chen, Y., Xiao, Y. Y., Meng, Q., Han, C. B., Yan, H., & Zhang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104249 · Cited by 291
Metadata
- Authors
- Bai, D., Bian, H., Jin, Z., Wang, H., Meng, L., Wang, Q., & (Frank) Liu, S.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 52
- Pages
- 408-415
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2886945996
- Cited by
- 208
- References
- 3
- FWCI
- 13.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.08.012
- The paper
- Bai, D., Bian, H., Jin, Z., Wang, H., Meng, L., Wang, Q., & (Frank) Liu, S. (2018). Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.08.012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.