The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Toward a remarkable Li-S battery via 3D printing
Abstract
Abstract We demonstrate the successful application of 3D printing (additive manufacturing) to construct high energy density and power density sulfur/carbon cathodes for Li-S batteries. A self-standing 3D-printed sulfur/carbon cathode with high sulfur loading based on a low-cost commercial carbon black was fabricated via a facile robocasting 3D printing process. The 3D-printed sulfur/carbon cathode shows excellent electrochemical performance in terms of capacity, cycling stability, and rate retention by facilitating Li+/e- transport at the macro-, micro-, and nano-scale in Li-S batteries. Meanwhile, the areal loading of the sulfur/carbon cathode can be easily controlled by the number of stacking layers during 3D printing process. The Li-S batteries assembled with the 3D-printed sulfur/carbon cathodes with a sulfur-loading of 3 mg cm−2 deliver a stable capacity of 564 mA h g−1 within 200 cycles at 3 C. Moreover, cathodes with a sulfur-loading of 5.5 mg cm−2 show large initial specific discharge capacities of 1009 mA h g−1 and 912 mA h g−1, and high capacity retentions of 87% and 85% after 200 cycles at rates as high as 1 C and 2 C (equaling to high areal current densities of 9.2 mA cm−2 and 18.4 mA cm−2), respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design of an artificial skin. Part III. Control of pore structure
Dagalakis, N., Flink, J., Stasikelis, P., Burke, J. F., & Yannas, I. V. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140417 · Cited by 358
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Self-citation3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Yang, X., Adair, K. R., Gao, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02714f · Cited by 392
Self-citation
Metadata
- Authors
- Gao, X., Sun, Q., Yang, X., Liang, J., Koo, A., Li, W., Liang, J., Wang, J., Li, R., Holness, F. B., Price, A. D., Yang, S., Sham, T.-K., & Sun, X.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 56
- Pages
- 595-603
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2903231307
- Cited by
- 161
- References
- 1
- FWCI
- 6.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Toward a remarkable Li-S battery via 3D printing. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.12.001
- The paper
- Gao, X., Sun, Q., Yang, X., Liang, J., Koo, A., Li, W., Liang, J., Wang, J., Li, R., Holness, F. B., Price, A. D., Yang, S., Sham, T.-K., & Sun, X. (2019). Toward a remarkable Li-S battery via 3D printing. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.12.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.