The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Recent advances on 3D printing graphene-based composites
Open accessAbstract
3D printing or additive manufacturing (AM) has revolutionized the way of manufacturing by designing complex structures in a customized feature which cannot be realized by traditional processing methods. Incoming materials are trying to adopt 3D printing techniques which directly fabricate sophisticated entities with multi-functionality like mechanical, electrical, thermal and magnetic properties etc. For the realization of advanced materials, 3D printing techniques are emerging from single material to composite materials manufacturing by simply introducing the nano- and micro-reinforcements with the matrix. In this review, we provide an outline of 3D printing graphene-based composites according to various AM techniques including fused deposition modeling (FDM), direct ink writing (DIW), stereolithography (SLA) and selective laser sintering (SLS). First a brief introduction of various AM techniques is given to get a basic understanding of the principles of 3D printing, and then the fabrication process, structural characteristics and applications of different 3D printing techniques for graphene-based composites are summarized. In addition, some effective simulation and characterization methods are also included. We hope that this review would clarify the potential of AM techniques for composite materials and can open new prospects for designing of novel materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The electronic properties of graphene
Castro Neto, A. H., Guinea, F., Peres, N. M. R., Novoselov, K. S., & Geim, A. K. (2009) · Reviews of Modern Physics · doi:10.1103/revmodphys.81.109 · Cited by 24,803
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
Deubel, M., von Freymann, G., Wegener, M., Pereira, S., Busch, K., & Soukoulis, C. M. (2004) · Nature Materials · doi:10.1038/nmat1155 · Cited by 1,083
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
Cited by
Guo, H., Zhao, H., Niu, H., Ren, Y., Fang, H., Fang, X., Lv, R., Maqbool, M., & Bai, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c10768 · Cited by 287
Self-citationOn the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Metadata
- Authors
- Guo, H., Lv, R., & Bai, S.
- Venue
- Nano Materials Science
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 1
- Issue
- 2
- Pages
- 101-115
- ISSN
- 2096-6482 (ISSN-L)
- 2589-9651
- OpenAlex
- W2947570887
- Cited by
- 218
- References
- 8
- FWCI
- 12.71
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent advances on 3D printing graphene-based composites. https://app.cochat.ai/papers/10.1016/j.nanoms.2019.03.003
- The paper
- Guo, H., Lv, R., & Bai, S. (2019). Recent advances on 3D printing graphene-based composites. Nano Materials Science. https://doi.org/10.1016/j.nanoms.2019.03.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.