The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding
Abstract
Abstract AlCoCrFeNiTix (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) HEA coatings reinforced by in-situ TiC particles were successfully prepared on AISI1045 steel via laser cladding. The coatings are made up of two BCC phases identified as Fe-Cr and Al-Ni phases, and a few in-situ TiC phases with a shape of granular in micro-nano scale. Ti element prefers to dissolve into the Al-Ni phase and refines the equiaxed grains. The AlCoCrFeNiTi1.0 HEA composite coating with the highest volume fraction of TiC particles phase (2.6%) exhibits the highest average microhardness (860.1 HV0.3). It is found that the composite coating is strengthened by the effect of solid solution strengthening, dispersion strengthening, and fine-grain strengthening. The wear behaviour of the coatings was tested at 25 °C and 600 °C, respectively. The micromorphology and chemical composition analysis of the wear scars show that oxidation wear occurs in addition to adhesive wear during the wear process at 600 °C. The oxidation products are identified as Al2O3, CoO, Cr2O3, Fe2O3, Fe3O4, and NiO in terms of the calculation of flash temperature and Gibbs free energy. The calculation results of wear rates show that the AlCoCrFeNiTi1.0 composite coating exhibits the best wear resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Self-citationMicrostructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Jin, G. D., Cai, Z., Guan, Y., Cui, X., Liu, Z., Li, Y., Dong, M., & Zhang, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.135 · Cited by 346
Zhang, A., Han, J., Su, B., Li, P., & Meng, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.11.072 · Cited by 285
Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys
Vaidya, M., Guruvidyathri, K., & Murty, B. S. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.342 · Cited by 202
Guo, Y., Shang, X., & Liu, Q. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.035 · Cited by 167
Recent Progress in High-Entropy Alloys
Zhang, L. S., Liang, G., Fu, L. C., & Tian, J. Y. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.631-632.227 · Cited by 104
Li, T., Liu, B., Liu, Y., Guo, W., Fu, A., Li, L., Yan, N., & Fang, Q. (2018) · Entropy · doi:10.3390/e20070517 · Cited by 30
Cited by
Recent research and development status of laser cladding: A review
Zhu, L., Xue, P., Lan, Q., Meng, G., Ren, Y., Yang, Z., Xu, P., & Liu, Z. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.106915 · Cited by 895
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Metadata
- Authors
- Liu, H., Liu, J., Chen, P., & Yang, H.
- Venue
- Optics & Laser Technology
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 118
- Pages
- 140-150
- ISSN
- 0030-3992 (ISSN-L)
- OpenAlex
- W2945733835
- Cited by
- 270
- References
- 17
- FWCI
- 13.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.