The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Recent research and development status of laser cladding: A review
Abstract
Abstract In industries such as aerospace, petrochemistry and automobile, many parts of different machines are under environment which shows high temperature and high pressure, and have their proneness to wear and corrosion. Therefore, the wear resistibility and stability under high temperature need to be further improved. Nowadays, Laser cladding (LC) is widely used in machine parts repairing and functional coating due to its advantages such as lower dilution rate, small heat-affected zone and good metallurgical bonding between coating and substrate. In this paper, LC is introduced in detail from aspects of process simulation, monitoring and parameter optimization. At the same time, the paper gives a comprehensive review over LC material system as high entropy alloys (HEAs), amorphous alloy and single crystal alloy have been gradually showing their advantages over traditional metal materials in LC. In addition, the applications of LC in functional coatings and in maintenance of machine parts are also outlined. Also, the existing problems and the development trend of LC is discussed then.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
Ye, Q., Feng, K., Li, Z., Lu, F., Li, R., Huang, J., & Wu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.176 · Cited by 408
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Jin, G. D., Cai, Z., Guan, Y., Cui, X., Liu, Z., Li, Y., Dong, M., & Zhang, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.135 · Cited by 346
Self-citationEffect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy
Majumdar, J. D., Galun, R., Mordike, B. L., et al. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00519-7 · Cited by 331
Liu, H., Liu, J., Chen, P., & Yang, H. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.05.006 · Cited by 270
Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
Zhang, X., Chen, H., Xu, L., Xu, J., Ren, X., & Chen, X. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108105 · Cited by 231
Jiang, Y. Q., Li, J., Juan, Y. F., Lu, Z. J., & Jia, W. L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.091 · Cited by 218
Bartkowski, D., Młynarczak, A., Piasecki, A., Dudziak, B., Gościański, M., & Bartkowska, A. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.12.005 · Cited by 215
FEM modeling and experimental verification for dilution control in laser cladding
Hofman, J. T., de Lange, D. F., Pathiraj, B., & Meijer, J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.007 · Cited by 190
Juan, Y. F., Li, J., Jiang, Y. Q., Jia, W. L., & Lu, Z. J. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.08.264 · Cited by 179
Modeling of transport phenomena during the coaxial laser direct deposition process
Wen, S., & Shin, Y. C. (2010) · Journal of Applied Physics · doi:10.1063/1.3474655 · Cited by 177
Cited by
A Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals
Bunaziv, I., Akselsen, O. M., Ren, X., Nyhus, B., Eriksson, M., & Gulbrandsen-Dahl, S. (2021) · Metals · doi:10.3390/met11111680 · Cited by 48
Metadata
- Authors
- Zhu, L., Xue, P., Lan, Q., Meng, G., Ren, Y., Yang, Z., Xu, P., & Liu, Z.
- Venue
- Optics & Laser Technology
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 138
- Pages
- 106915
- ISSN
- 0030-3992 (ISSN-L)
- OpenAlex
- W3127599543
- Cited by
- 895
- References
- 39
- FWCI
- 57.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent research and development status of laser cladding: A review. https://app.cochat.ai/papers/10.1016/j.optlastec.2021.106915
- The paper
- Zhu, L., Xue, P., Lan, Q., Meng, G., Ren, Y., Yang, Z., Xu, P., & Liu, Z. (2021). Recent research and development status of laser cladding: A review. Optics & Laser Technology. https://doi.org/10.1016/j.optlastec.2021.106915
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
