The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Recent research and development status of laser cladding: A review
Abstract
In industries such as aerospace, petrochemistry and automobile, many parts of different machines are under environment which shows high temperature and high pressure, and have their proneness to wear and corrosion. Therefore, the wear resistibility and stability under high temperature need to be further improved. Nowadays, Laser cladding (LC) is widely used in machine parts repairing and functional coating due to its advantages such as lower dilution rate, small heat-affected zone and good metallurgical bonding between coating and substrate. In this paper, LC is introduced in detail from aspects of process simulation, monitoring and parameter optimization. At the same time, the paper gives a comprehensive review over LC material system as high entropy alloys (HEAs), amorphous alloy and single crystal alloy have been gradually showing their advantages over traditional metal materials in LC. In addition, the applications of LC in functional coatings and in maintenance of machine parts are also outlined. Also, the existing problems and the development trend of LC is discussed then.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
Ye, Q., Feng, K., Li, Z., Lu, F., Li, R., Huang, J., & Wu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.176 · Cited by 408
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Jin, G. D., Cai, Z., Guan, Y., Cui, X., Liu, Z., Li, Y., Dong, M., & Zhang, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.135 · Cited by 346
Self-citationEffect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy
Majumdar, J. D., Galun, R., Mordike, B. L., et al. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00519-7 · Cited by 331
Liu, H., Liu, J., Chen, P., & Yang, H. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.05.006 · Cited by 270
Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
Zhang, X., Chen, H., Xu, L., Xu, J., Ren, X., & Chen, X. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108105 · Cited by 231
Jiang, Y. Q., Li, J., Juan, Y. F., Lu, Z. J., & Jia, W. L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.091 · Cited by 218
Bartkowski, D., Młynarczak, A., Piasecki, A., Dudziak, B., Gościański, M., & Bartkowska, A. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.12.005 · Cited by 215
Modeling of transport phenomena during the coaxial laser direct deposition process
Wen, S., & Shin, Y. C. (2010) · Journal of Applied Physics · doi:10.1063/1.3474655 · Cited by 192
FEM modeling and experimental verification for dilution control in laser cladding
Hofman, J. T., de Lange, D. F., Pathiraj, B., & Meijer, J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.007 · Cited by 190
Juan, Y. F., Li, J., Jiang, Y. Q., Jia, W. L., & Lu, Z. J. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.08.264 · Cited by 179
Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC
Zhang, Z., Yu, T., & Kovacevic, R. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.137 · Cited by 166
A comprehensive analytical model for laser powder-fed additive manufacturing
Huang, Y., Khamesee, M. B., & Toyserkani, E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.07.001 · Cited by 165
A physical modeling and predictive simulation of the laser cladding process
Wirth, F., & Wegener, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.017 · Cited by 165
Zhang, Y., Liu, X., Li, Z., Zhu, S., Yuan, X., Cui, Z., Yang, X., Chu, P. K.-H., & Wu, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17351 · Cited by 152
Li, J., Xiang, S., Luan, H., Amar, A., Liu, X., Lu, S., Zeng, Y., Le, G., Wang, X., Qu, F., et al. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.05.062 · Cited by 142
Ni, C., Shi, Y., Liu, J., & Huang, G. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.01.058 · Cited by 133
Bidron, G., Doghri, A., Malot, T., Chabert, F. F. D., Thomas, M., & Peyre, P. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.116461 · Cited by 112
Reddy, L., Preston, S., Shipway, P. H., Davis, C., & Hussain, T. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.05.054 · Cited by 110
Mohanty, A., Sampreeth, J. K., Bembalge, O. B., Hascoët, J.-Y., Marya, S. K., Immanuel, R. J., & Panigrahi, S. K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125028 · Cited by 104
Wear resistance in the soil of Stellite-6/WC coatings produced using laser cladding method
Bartkowski, D., & Bartkowska, A. (2016) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2016.12.013 · Cited by 103
Khorram, A., Jamaloei, A. D., Paidar, M., et al. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.124933 · Cited by 97
Microstructure of laser cladded carbide reinforced Inconel 625 alloy for turbine blade application
Huebner, J., Kata, D., Kusinski, J. P., Rutkowski, P., & Lis, J. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.03.194 · Cited by 87
Zhai, L., Ban, C., & Zhang, J. W. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.11.034 · Cited by 86
Chang, F., Cai, B., Zhang, C., et al. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.12.072 · Cited by 84
Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing
Lee, Y., & Farson, D. F. (2015) · Journal of Laser Applications · doi:10.2351/1.4935711 · Cited by 79
MoFe1.5CrTiWAlNbx refractory high-entropy alloy coating fabricated by laser cladding
Wang, H., Liu, Q., Guo, Y., & Lan, H. (2019) · Intermetallics · doi:10.1016/j.intermet.2019.106613 · Cited by 78
Song, H., Lei, J., Xie, J., Wu, S., Wang, L., & Shou, W. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.07.102 · Cited by 77
Deschuyteneer, D., Petit, F., Gonon, M., & Cambier, F. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.12.110 · Cited by 66
Yao, H.-L., Yi, Z.-H., Yao, C. L., Zhang, M., Wang, H., Li, S.-B., Bai, X.-B., Chen, Q., & Ji, G.-C. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.11.271 · Cited by 60
Liu, Z., Qi, H., & Jiang, L. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.017 · Cited by 56
Self-citationYan, S., Wu, D., Niu, F., Huang, Y., Liu, N., & Ma, G. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.10.067 · Cited by 56
Microstructure and properties of laser clad high-entropy alloy coating on aluminium
Shi, Y., Ni, C., Liu, J., & Huang, G. (2018) · Materials Science and Technology · doi:10.1080/02670836.2018.1444921 · Cited by 47
Meng, G., Protasova, N. A., Kruglov, E. P., Lin, X., Xie, H., & Ding, X. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.120 · Cited by 47
Self-citationPersenot, T., Burr, A., Plancher, E., et al. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.014 · Cited by 46
Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels
Leunda, J., Sanz, C., & Soriano, C. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.10.002 · Cited by 36
Lian, G., Zhang, H., Zhang, Y., et al. (2019) · Materials · doi:10.3390/ma12050793 · Cited by 27
Cai, Z., Cui, X., Jin, G. D., Liu, Z., Li, Y., & Dong, M. (2017) · Micron · doi:10.1016/j.micron.2017.10.001 · Cited by 21
Self-citationИгоревич, Г. А., Nyukhlaev, O. A., & Gilmutdinov, А. K. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2620-7 · Cited by 20
Weitong, Z., & Dejun, K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125058 · Cited by 17
Cited by
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
A Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals
Bunaziv, I., Akselsen, O. M., Ren, X., Nyhus, B., Eriksson, M., & Gulbrandsen-Dahl, S. (2021) · Metals · doi:10.3390/met11111680 · Cited by 48
Metadata
- Authors
- Zhu, L., Xue, P., Lan, Q., Meng, G., Ren, Y., Yang, Z., Xu, P., & Liu, Z.
- Venue
- Optics & Laser Technology
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 138
- Pages
- 106915
- ISSN
- 0030-3992 (ISSN-L)
- OpenAlex
- W3127599543
- Cited by
- 895
- References
- 39
- FWCI
- 57.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.