The DOI matches its Crossref record.
Fully printed electronics on flexible substrates: High gain amplifiers and DAC
Open accessAbstract
We propose a novel simple Fully-Additive printing process, involving only depositions, for realizing printed electronics circuits/systems on flexible plastic films. This process is Green (non-corrosive chemicals), On-Demand (quick-to-print), Scalable (large-format printing) and Low-Cost vis-à-vis Subtractive printing, a complex deposition-cum-etching process that otherwise requires expensive/sophisticated specialized IC-like facilities and is Un-Green, Not-On-Demand, Un-scalable and High-Cost. The proposed Fully-Additive process features printed transistors with high (∼1.5 cm2/Vs) semiconductor carrier-mobility, ∼3× higher than competing state-of-the-art Fully-Additive processes and comparable to Subtractive processes. Furthermore, passive elements including capacitors, resistors, and inductors, and two metal-interconnect layers are likewise Fully-Additive printed–to our knowledge, to-date the only Fully-Additive process capable of realizing complex circuits/systems on flexible plastic films. Several analog and mixed-signal circuits are demonstrated, including proposed and conventional differential amplifiers, and a charge-redistribution 4-bit digital-to-analog converter (DAC). The proposed amplifier embodies a novel positive-cum-negative feedback to simultaneously significantly improve the gain and reduce susceptibility to process variations. To improve the speed and reduce the area of the DAC, the parasitic capacitors therein are exploited. The Fully-Additive proposed amplifier and DAC are benchmarked against reported realizations (all Subtractive-based processes), and are shown to be highly competitive despite its realization based on the simple low-cost proposed Fully-Additive process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices
Wang, B., & Facchetti, A. (2019) · Advanced Materials · doi:10.1002/adma.201901408 · Cited by 515
Fukuda, K., Takeda, Y., Yoshimura, Y., Shiwaku, R., Tran, L. T., Sekine, T., Mizukami, M., Kumaki, D., & Tokito, S. (2014) · Nature Communications · doi:10.1038/ncomms5147 · Cited by 403
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Fukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Metallic Nanoparticle Inks for 3D Printing of Electronics
Tan, H. W., An, J., Chua, C. K., & Tran, T. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800831 · Cited by 286
Chang, J. S., Facchetti, A. F., & Reuss, R. (2017) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2017.2673863 · Cited by 271
Self-citationScreen printed passive components for flexible power electronics
Ostfeld, A. E., Deckman, I., Gaikwad, A. M., Lochner, C. M., & Arias, A. C. (2015) · Scientific Reports · doi:10.1038/srep15959 · Cited by 119
Metadata
- Authors
- Chang, J., Zhang, X., Ge, T., & Zhou, J.
- Venue
- Organic Electronics
- Publisher
- Elsevier BV
- Published
- 2014-03
- Volume
- 15
- Issue
- 3
- Pages
- 701-710
- ISSN
- 1566-1199 (ISSN-L)
- OpenAlex
- W2000415031
- Cited by
- 174
- References
- 0
- FWCI
- 13.27
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.